Name: Optronics LED Clearance or Side Marker Light With Reflector - 6 LEDs - Square - Amber / Red
Brand: Super Bright LEDs
SKU: MCL36xBP
Price: 9.99 USD
Availability: InStock

Overview

Description

The square Optronics LED clearance or side marker light with reflector is constructed of an acrylic lens and an ABS housing. Stud mounts to your application. Hardwire using the two-wire design with a power and ground wire.

Product Details:

Reflective lens eliminates need for separate reflector
Stud mount
12 VDC
Lifetime Warranty

The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures—such as headlights and taillights—that have a DOT compliance mark are legal, safe, and considered to provide suitable illumination for street use when properly installed.

Super Bright LEDs, Inc. warrants that products carrying a lifetime warranty will be free from defects in the material and workmanship for the lifetime of the product. If Super Bright LEDs verifies that the defect was not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product with the same product. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More

Applications

Semi-Truck Lighting
Side Marker Lights
Freightliner Light
Flatbed Truck Lights
LED Clearance Lights
Peterbilt Truck Lights

Specifications

Ambient Operating Temperature	-30~+50 °C (-22~+122 °F)
Brand	Optronics
Certifications/Compliance	DOT Compliant
Current Draw Current Draw is used to size fuses and wire for a circuit. Current draw is the amount of energy consumed by an LED or LEDs in an electrical circuit at a specific voltage, measured in amps (A) or milliamps (mA).	50 mA
Environmental Rating Learn more about environmental rating	Waterproof
FMVSS Code Learn more about environmental rating	A, P2
Input Connection Type	Pigtail
Input Voltage	12 VDC
IP Rating Learn more about IP rating	IP65
LED Quantity	6 LEDs
Mount Type	Stud
PC Rated	No
Power Consumption	0.7 Watts
Product Materials	ABS, Polycarbonate Housing
Warranty	Lifetime
Wire Gauge	18 AWG

Print Specifications

Part NO	LED Color	Series
MCL36ABP	Amber
MCL36RBP	Red

Accessories & Power Supplies

All Accessories

Connectors

Installation Supplies

Mounting

Wiring

Accessories Links

Accessory Category

Accessory Type:

$9.95 ea.

Weatherproof Dolphin Super B Connector with Sealant - 100 Pieces Part Number: DC-x-S
In stock

Dolphin Super B Connectors provide the industry’s most reliable connection with their unique design and tine structure. They reduce costs, will not corrode and do not require insulation stripping of most wire gauges before insertion. Weatherproof IP65 rating. Available in a 100 Pack.
$0.09 ea.

16-14 AWG Female Bullet Connector - Insulated Quick-Connect Crimp Terminal - 16-14 AWG Part Number: BFN-164
In stock

Use this female bullet connector to quickly connect and disconnect 16-14 AWG wire. The fully insulated terminal is made of clear nylon to easily inspect connections. This terminal mates with 16-14 AWG and 22-18 AWG male bullet connectors.
$0.09 ea.

16-14 AWG Male Bullet Connector - Insulated Quick-Connect Crimp Terminal - 16-14 AWG Part Number: BMN-164
In stock

Use this male bullet connector to quickly connect and disconnect 16-14 AWG wire. The fully insulated terminal is made of clear nylon to easily inspect connections. This terminal mates with 16-14 AWG and 22-18 AWG female bullet connectors.

$0.19 ea.

Corrugated Split Loom Part Number: CSL-x
In stock

CSL-x series black polyethylene corrugated split looms. Protects and conceal wires, cables, and tubings. Splits down the side to allow covering of pre-installed wiring. Corrugated split looms are available in 1/4", 3/8", 1/2", and 3/4" sizes.
$0.19 ea.

Corrugated Split Loom - 1/4 inch - 1ft Part Number: CSL-250
In stock
$0.24 ea.

Corrugated Split Loom - 3/8 inch - 1ft Part Number: CSL-350
In stock
$0.23 ea.

16-14 AWG Butt Connectors - Butt Connectors Part Number: PSC-164
In stock

Use this butt connector to connect and seal 16-14 AWG wire. The insulated vinyl terminal protects wire connections from water, salt, and corrosion. Seal with a heat gun.
$0.29 ea.

Corrugated Split Loom - 1/2 inch - 1ft Part Number: CSL-500
In stock
$0.15 ea.

Hole Snap-In Strain Relief Bushing Part Number: PSB-x
In stock

Eliminates sharp edges and protects wires and harnesses passing through holes in metal plates and panels. Resists up to 35 pounds pull.
$0.15 ea.

Hole Snap Bushing - 3/8 Inch Part Number: PSB-250
In stock
$0.49 ea.

Corrugated Split Loom - 3/4 inch - 1ft Part Number: CSL-750
In stock
$0.15 ea.

Hole Snap-In Strain Relief Bushing - 1/2 Inch Part Number: PSB-375
In stock
$0.39 ea.

Black Cable Ties - 10 Pack Part Number: CT-B-10
In stock

4, 6, and 11 inch Cable tie - .875" max dia.; 6 inch Cable tie - 1.50" max dia.; 11 inch Cable tie with - 3.062" max dia.; 16 inch Stud Mount Cable tie - 4.125" max dia.
$0.05 ea.

$0.45 per Pack

Black Cable Ties - 10 Pack - 6 Inch Long Part Number: CT-B06-10
In stock
$0.20 ea.

Hole Snap-In Strain Relief Bushing - 5/8 Inch Part Number: PSB-625
In stock
View all

Installation Supplies

16 additional compatible accessories

View All Compatible "Installation Supplies" Accessories

$0.69 ea.

Nylon Push Mount Base for Cable Ties - Push Mount Part Number: PMB-250
In stock

Cable tie mounting base to secure wires on surface. Fits 1/4" diameter hole - For ties up to 3/8" wide.
$1.99 ea.

Heavy Duty Mount for Cable Ties Part Number: HDM-x
In stock

Heavy-duty mount for cable ties to secure wires to surfaces up to 1/2" wide. A small tab inside the mounting hole temporarily engages threads, allowing assemblers to pre-install the mount on a stud before securing it with a washer and nut (not included). Available in #10 size mounting hole (1/4") and #8 size mounting hole (3/16").
$1.99 ea.

Heavy Duty Mount for Cable Ties - 3/16" Diameter Part Number: HDM-187
In stock
$1.99 ea.

Heavy Duty Mount for Cable Ties - 1/4" Diameter Part Number: HDM-250
In stock

$0.45 ea.

22-12 AWG Waterproof Silicone Filled Twist-On Wire Connector Part Number: WWN-2212
In stock

UL listed waterproof wire connectors suitable for all wire splices, especially those exposed to condensation, water, vapors or dust. 22-12 AWG Blue wire connector pre-filled with silicone to seal and protect connection from moisture. Not suitable for submersed connections. Price for each.
$9.95 per Bag

Weatherproof Dolphin Super B Connector with Sealant - 100 Pack Part Number: DC-100-S
In stock
$0.99 per Foot

4-Wire Trailer Wire - 16 Gauge Parallel Bonded Wire - Four Conductor - 16 AWG Power Wire Part Number: WP16-4
In stock

This 4-wire trailer wiring is for low voltage installations. Parallel bonded four conductor 16 gauge 1x16 stranded wire. Commonly used for trailer wiring. Price per foot.

Reviews

0%

0 / 5 stars

0 reviews

Write Your Own Review

Write a Review

You're reviewing: Optronics LED Clearance or Side Marker Light With Reflector - 6 LEDs - Square - Amber / Red

Select Product

Select Rating

1 star 2 stars 3 stars 4 stars 5 stars

Nickname

Email Address

Summary

Review

Technical Level

Add your photo

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

Review text does not pertain to the product
Abusive and offensive language
Photos are not related to the reviewed product
Any violation of laws and/or copyrighted material
Unrelated hyperlinks/URLs

Optronics LED Clearance or Side Marker Light With Reflector - 6 LEDs - Square - Amber / Red

Features

Product Photos

Dimensional Drawings