4ft LED Vapor Tight Light - Field Selectable - 60W Max - Up to 8,100 Lumens
Part Number:
LS-VT40-50-60W-XXK
Manufacturer Part Number:
$72.99
ea.
Was
In Stock
Features
- Impact, dust, and moisture resistant
- Selectable wattage: 40W, 50W, 60W
- Selectable CCT: 3000K, 4000K, 5000K
- Equivalent to four 32W fluorescent T8 tubes
- DLC 5.1 Premium
Related Products
Overview
This 4ft LED Vapor Tight Light with selectable wattage and CCT has a tight seal that prevents water, dust, and other particles from entering. Using the switch located on the driver, select a color temperature from 3000K, 4000K, and 5000K and a wattage from 40W, 50W, and 60W. Combining energy efficiency with impact-resistant polycarbonate construction, this vapor tight light ensures long-lasting and versatile lighting. Stainless steel latches securely fasten to provide a tight seal. The fixture is ideal for lighting applications such as gas stations and laundromats.
Product Details:
- Polycarbonate housing and lens with stainless steel latches
- IP65 rated waterproof
- 120–277 VAC
- DLC 5.1 Premium
- 5-year warranty
Ledsion Field Selectable LED Vapor Tight Light Specification Sheet Applications:
- Gas Stations
- Industrial Facilities
- Laundry Facilities
- Manufacturing Plants
- Walkways
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Super Bright LEDs administers all warranty claims in-house. Read More
This product meets higher lumen and efficacy standards than are required for a normal DLC® classification. This classification also requires submission of a driver IN-SITU temperature measurement test (ISTMT) along with information regarding integral controls.
A product that bears an ETL-Certified label has been evaluated by a Nationally Recognized Testing Laboratory (NRTL) and meets national product safety standards. An ETL certification is accepted in the U.S. and in Canada.
Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.
Specifications
| Ambient Operating Temperature | -30 to 40 °C (-22 to 104 °F) |
|---|---|
| Beam Angle | 110° |
| Brand | LEDSION |
|
CCT
CCT
 |
3000K, 4000K, 5000K, Selectable CCT |
|
Certifications/Compliance
Certifications/Compliance
Standards and certifications comprise a vast number of companies and compliances that serve specific purposes—primarily addressing safety, environmental impact and energy efficiency, and sanitation. They are divided into categories for each product type and certification type to allow for very specific qualifications related to each product. When this system is being used as intended, it gives consumers, installers, suppliers, and anyone else that may be involved confidence that the product is safe and will work well in their application. The most common UL and ETL certifications relate to safety and installation, although they do also provide some sanitation-related certifications (using NSF standards). Another common certification body is the DLC, which specializes in certifying the performance of a light—mainly related to environmental impact and electrical efficiency. Learn more about different certification types here . |
DLC Premium, ETL Listed, FCC |
|
CRI
CRI
 |
80+ |
|
Current Draw
Current Draw
Current draw is calculated using the following formula: W/V = A, where W = the amount of power your light needs (wattage), V is the electrical system voltage (e.g., 120V AC), and A = amps. An ampere or amp (A) is the standard unit for electrical current. A milliamp (mA) equals one-thousandth of an amp, or 1000 mA is equivalent to 1 A.
Choosing LED fixtures with the correct amperage ensures safe and proper operation, preventing damage or injury. We recommend having all electrical components and fixtures installed by a certified professional electrician or lighting technician in compliance with all relevant standards and regulations. |
330/415/500 mA @ 120 VAC, 145/180/215 mA @ 277 VAC |
| Dimmable | Yes |
|
Dimmer Type
Dimmer Type
|
0-10V |
| Efficacy | 160 lm/W |
|
Environmental Rating
Environmental Rating
 |
Waterproof |
| Equivalency | 4-lamp 32W T8 Tubes |
| Finish | Gray |
| Input Connection Type | Terminal Block |
|
IP Rating
IP Rating
 |
IP65 |
| LED Color | Warm White, Natural White, Cool White, Selectable CCT |
| Rated Life (L70) | 50000 Hours |
| Lens Color | Frosted |
| Lens Type | Polycarbonate |
| Lumens | 6400 Lumens, 8000 Lumens, 9600 Lumens |
| Microwave Motion Sensor | None |
| Operating Voltage | 120-277 VAC |
| Output Connection Type | Terminal Block |
| Power Factor | ≥0.95 |
| Product Materials | Polycarbonate Housing, Polycarbonate Lens, Silicone Gasket, Stainless Steel Latches |
| Product Weight | 4.7 lb (2.1 kg) |
| Warranty | 5 Year |
| Wattage | 40 Watts, 50 Watts, 60 Watts |
Accessories & Power Supplies
Reviews
Customer Submitted Photos
Write Your Own Review
Review Guidelines
Super Bright LEDs reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs
