Name: LED Work Light - 3.5” Vibration Resistant Flood Light - 60W - 4,500 Lumens - Single / 2-Pack
Brand: Super Bright LEDs
SKU: WLVM-60W-FL-x
Price: 149.90 USD
Availability: InStock

Overview

Description

The 3.5” vibration-resistant LED work light is designed for rugged outdoor applications such as construction equipment, forestry equipment, and agricultural machinery. The light is designed with a rubber piece on the bottom of the stainless steel mounting bracket, creating 60G shock resistance and 15G vibration resistance. A 100° flood light distribution provides wide visibility in open work areas. Built with a powder-coated aluminum housing, a stainless steel mounting bracket, and rated IP69K, the work light is durable in the harshest operating conditions. A bezel-less design prevents mud and snow from accumulating on the lens. Easily power using the built-in DT connector on the back of the light.

Product Details:

Powder-coated aluminum housing
Bezel-less design to prevent accumulation of mud, snow, and water
100° flood light distribution
Built-in DT connector
Stainless steel bracket with lock nut for vibration resistance
Installation hardware included
12-36 VDC
Lifetime Warranty

Super Bright LEDs, Inc. warrants that products carrying a lifetime warranty will be free from defects in the material and workmanship for the lifetime of the product. If Super Bright LEDs verifies that the defect was not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product with the same product. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More

Specifications

Beam Angle	100°
Beam Pattern	Flood
Current Draw Current Draw is used to size fuses and wire for a circuit. Current draw is the amount of energy consumed by an LED or LEDs in an electrical circuit at a specific voltage, measured in amps (A) or milliamps (mA).	2 A @ 24 VDC, 4 A @ 12 VDC
Finish	Black
Connector	DT Connector
IP Rating .	IP69K
Color Options	Cool 5000K
LED Lifetime	30000 Hours
Size	4in (0.33ft)
Lumen	4500 Lumens
Material	Aluminum
Ambient Operating Temperature	-30~+65 °C (-22~+149 °F)
Vibration Resistance	15 Grms
Voltage	12-36 VDC

Print Specifications

Accessories & Power Supplies

All Accessories

Mounting

Flashers & Relays

Wiring Harnesses

Installation Supplies

Switches

Accessories Links

Accessory Category

Accessory Type:

$34.99 ea.

Universal Mounting Bracket for Off Road LED Light Bar - Mounting Bracket Part Number: MODLED10-BK
In stock

Adjustable LED light bar mounting clamps are an excellent way to mount single row or dual row off road LED light bars to roll cages or other vehicle's tubular accessories. These pivoting clamps will allow to mount up to a 50” light bar to cage even if the cage does not run parallel to the light bar. A simple solution for mounting on brush guard bumpers, roof racks, and wakeboard towers as well. Requires 2 per off road led light bar. Must be purchased with Modular Strap Clamp.
$5.95 ea.

Work Light Round Magnet Base - Magnet Base Part Number: WL-MB
In stock

3" Round Magnet Base encased in steel cup with 0.33" center mounting hole. Includes foam pad to prevent scratches and nut and bolt for attaching LED Work Light or LED Off Road Light Bar. For use on steel surfaces such as vehicles, refrigerators, machinery, filing cabinets, beams, and doors.
$34.99 ea.

Modular Roll Cage Strap Clamp Part Number: MODCLx-BK
In stock

Adjustable LED light bar mount is an excellent way to mount single or dual row off road LED light bars and work lights to roll cages or other vehicle's tubular accessories. These pivoting mounts will allow mounting up to a 50” light bar to roll cage even if the cage does not run parallel to the light bar. A simple solution for mounting on brush guard bumpers, roof racks, and wakeboard towers as well. Requires 2 per off road led light bar. Must be purchased with Universal Mounting Bracket.
$5.99 ea.

LED Work Light Extension Tab - Bracket Part Number: WL-EXTMB
In stock

Use this LED Work Light Extension Tab to mount an LED work light where space is limited. Attach one end of the extension to your LED light mount and the other end to your LED light. The durable steel extension tab has a black powder coat for rust resistance. Tab measures 4” in length with 2” between mounting points.

$2.99 ea.

12V DC 30/40A 5 PIN Universal Relay - 5 Pin Relay Part Number: R5-SPDT-1240
In stock

40 Amp, 12 Volt, 5 pin Relay in SPDT (Single Pole Double Throw) configuration with NO (Normally Open) and NC (Normally Closed) contacts. Plastic housing with integrated mounting tab and standard 5 pin layout that accepts female sockets, solder or spade terminals. Relays suitable for use with high power LED Off Road Bars, AUX lights, and other custom applications.
$1.99 ea.

5 Pin Relay Socket - Pigtail Connection - 5 Pin Relay Socket Part Number: R5-SW
In stock

Pre-wired relay socket for use with 12 VDC Bosch type five terminal relays. 3 x 12in 18 AWG power wires and 2 x 12in 16 AWG load wires. Suitable for use with high power LED Off Road Bars, AUX lights, Work Lights and other custom applications.

$19.99 ea.

LED Light Wiring Harness with Switch and Relay - Single Output - DT Connector Part Number: WH-DTS10
In stock

The single-output LED light wiring harness with switch, and relay is a plug-and-play harness for LED work lights and off-road light bars. Each harness includes an On/Off switch with an LED indicator, fuse, and automotive relay with solderless spade connections. It has a 115-inch length with a 6-inch DT pigtail adapter. The maximum load is 18 Amps. Wiring harness for 12V products only.
$19.99 ea.

LED Light Wiring Harness with Switch and Relay - Dual Output - DT Connector Part Number: WH-DTD15
In stock

The dual-output LED light wiring harness with switch and relay is a plug-and-play harness for LED work lights and off-road light bars. Each harness includes an On/Off switch with an LED indicator, fuse, and automotive relay with solderless spade connections. It has a 115-inch length with a 6-inch DT pigtail adapter. The maximum load is 5.5 Amps per channel. Wiring harness for 12V products only.
$29.99 ea.

LED Light Wiring Harness with Relay and Weatherproof Switch - Dual Output - DT Connector Part Number: WWH-DTD30
In stock

The dual-output LED light wiring harness with switch and relay is a plug-and-play harness for LED work lights and off-road light bars. The harness includes a weatherproof On/Off switch with an LED indicator, fuse, and automotive relay with solderless spade connections. It has a 114-inch length with two 6-inch DT pigtail adapters. The maximum load is 7.5 Amps per channel. Wiring harness is only for 12V products.

$0.39 ea.

Black Cable Ties - 10 Pack Part Number: CT-B-10
In stock

4, 6, and 11 inch Cable tie - .875" max dia.; 6 inch Cable tie - 1.50" max dia.; 11 inch Cable tie with - 3.062" max dia.; 16 inch Stud Mount Cable tie - 4.125" max dia.

$7.99 ea.

Weatherproof LED Rocker Switch - Off-Road Lights Switch Part Number: RS-1
In stock

This single-pole, single-throw (SPST) LED rocker switch lets you quickly control the off-road lights on your truck, ATV, UTV, boat, tractor, or machine. The illuminated switch has two independently controlled red or white LED indicators: lit text when the vehicle is ON and lit legend when the switch is ON.
$159.99 ea.

Universal LED Backlit Switch Panel - 8 Channel Automotive Control System - 12 - 24 VDC Part Number: USP-8CH-x
In stock

Replace traditional rocker switches! All-in-one LED switch panel controls up to 8 lights or devices. Shop now!

Reviews

0%

0 / 5 stars

0 reviews

Write Your Own Review

Write a Review

You're reviewing: LED Work Light - 3.5” Vibration Resistant Flood Light - 60W - 4,500 Lumens - Single / 2-Pack

Select Product

Select Rating

1 star 2 stars 3 stars 4 stars 5 stars

Nickname

Email Address

Summary

Review

Technical Level

Add your photo

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

Review text does not pertain to the product
Abusive and offensive language
Photos are not related to the reviewed product
Any violation of laws and/or copyrighted material
Unrelated hyperlinks/URLs

LED Work Light - 3.5” Vibration Resistant Flood Light - 60W - 4,500 Lumens - Single / 2-Pack

Features

Product Photos