These integrated T5 LED fixtures come with a 3-prong power cord. They emit up to 1,840 lumens of dimmable natural white light. The plug-and-play linear LED lights consume no more than 16 watts of power and are designed to last 5 times longer than fluorescent tube light fixtures. They have frosted lenses and slim aluminum housings. Create a light series with the optional butt connector or with one of several interconnect cables (sold separately). Tube end caps and mounting hardware are included. These fixtures operate on 120 VAC. The linear task lights are perfect for workshops/benches, under-cabinet lighting, garages, and more.
ETL Listed
CE
5 Years
A product that bears an ETL-Certified label has been evaluated by a Nationally Recognized Testing Laboratory (NRTL) and meets national product safety standards. An ETL certification is accepted in the U.S. and in Canada.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More
Applications
RV Interiors
Trunk
Emergency Vehicle Lighting
Enclosed Trailers
Off Grid Lighting
Cargo Lighting
Under-Cabinets
Boat Cabins
LED Workbench Light
Specifications
Ambient Operating Temperature
-20~+40 °C (-4~+104 °F)
CCT Value
4000K
Certifications/Compliance
CE, ETL Listed
Color Temperature
Correlated Color Temperature is the hue, or tint of white to expect from a light source and is measured in kelvin.
Lower numbers give off a warmer white that is closer to candle light, and is good for relaxed and cozy spaces.
Higher numbers give off a cooler white light that will appear more blueish. While values to the middle of the spectrum give off a more neutral or natural white light that is similar to daylight.
Natural and cool white are considered ideal for task lighting.
Beam angle is used to express the width of the light emitting from the source. The narrower the beam angle the more focused the light energy is. Comparing two 40 watt lights one with a beam angle of 30(a) and another with a beam angle of 90(b), They both produce the same amount of light output but (a) will appear brighter in the beam angle compared to (b) at the sacrifice of light spread.
Current Draw is used to size fuses and wire for an electrical circuit. Current draw is the amount of energy consumed by an LED or LEDs in an electrical circuit at a specific voltage, measured in amps (A) or milliamps (mA).
Shipping exclusions apply to some products, making them ineligible for free shipping. Any order with a combined weight of over 150 pounds or containing an excluded item will be excluded from free shipping automatically. One or more exclusions may apply to the same product as well. Exclusions per item may include, but are not limited to, the following:
• Any package with any two dimensions of the package over 30 inches. • Any package with a single side of the package over 42.3 inches. • Any package with a total combined length of the longest side added to 2 times the second and third longest sides over 130 inches. (L + 2H + 2W) • Any package with a weight over 50 pounds.
Use these 3M 22-16 AWG grey wire connector for closed-end connections and secure splices. The UL-Listed twist-on wire connectors tighten with out ratcheting and feature a deep skirt to prevent bare wire from being exposed.
Use this 120V TRIAC dimmer for dimmable LED bulbs and fixtures. It has a paddle switch for on/off functionality and a small slider for dimming. The single-pole dimmer can be used to control lights from 1 location. Use the integrated low-end trim adjustment dial to achieve your fixture or bulb's lowest light level with out flickering. This 120V 60Hz LED dimmer has a 150-watt max for LEDs (150-watt max for CFL bulbs and 600-watt max for incandescent bulbs).
Parallel bonded three conductor 18 gauge 3x18 stranded power wire for installations. This standard SJT cable is ideal for high voltage applications. Price per foot.
Use this butt connector to connect and seal 22-18 AWG wire. The insulated vinyl terminal protects wire connections from water, salt, and corrosion. Seal with a heat gun.
Easily splice wires with out stripping insulation with single-channel or dual-channel "T" tap connectors. The non-weatherproof, insulated wire splice connectors are designed for 24-18 gauge wire and have a secure snap closure to hold wires in place. The clear design allows you to ensure that wires are connected. Use multiple combinations of single- and dual-channel connectors to reach your installation needs. Great for adding wires to an existing installation or starting a new one. Rated for 10 Amps at 300V AC/DC.
Use these pigtail power cords with your 12V or 120V T5 Linkable Linear LED Light Fixtures. Wire 12V T5 lights into a compatible power supply or 12V system, or wire 120V T5 lights into your home electrical system. The pigtail power cords can also be used to create custom interconnections.
These dual-conductor quick wire connectors are perfect for connections that need to be assembled and reassembled into different configurations. Connectors are designed with interlocking ends and easily snap together. The non-weatherproof, insulated wire splice connectors are designed for 22-18 gauge wire and have a secure snap closure to hold wires in place; there's no need to strip wire insulation. Each connector is rated for 6 Amps at 36VDC or 25 VAC. Price per pair. Also available in a 3-connector kit with Y splitter.
Use this butt connector to connect and seal 16-14 AWG wire. The insulated vinyl terminal protects wire connections from water, salt, and corrosion. Seal with a heat gun.
Use this interconnect cable to join T5 Linkable Linear LED Task Lights. It's compatible with 12v and 120V integrated T5 lights and is available in 1' or 3.28' lengths.
These dual-conductor quick wire connectors are perfect for connections that need to be assembled and reassembled into different configurations. Connectors are designed with interlocking ends and easily snap together or into the included Y splitter. The kit includes 3 wire splice connectors, Y splitter, and a double-sided 3M adhesive pad. The non-weatherproof, insulated wire splice connectors are designed for 22-18 gauge wire and have a secure snap closure to hold wires in place; there's no need to strip wire insulation. Each connector is rated for 6 Amps at 36VDC or 25 VAC. If both outputs are being used on the Y splitter, connectors can handle 3 amps each. Connectors are also sold as a pair.
Use these 3M 22-16 AWG grey wire connector for closed-end connections and secure splices. The UL-Listed twist-on wire connectors tighten with out ratcheting and feature a deep skirt to prevent bare wire from being exposed.
Use this butt connector to connect and seal 22-18 AWG wire. The insulated vinyl terminal protects wire connections from water, salt, and corrosion. Seal with a heat gun.
Easily splice wires with out stripping insulation with single-channel or dual-channel "T" tap connectors. The non-weatherproof, insulated wire splice connectors are designed for 24-18 gauge wire and have a secure snap closure to hold wires in place. The clear design allows you to ensure that wires are connected. Use multiple combinations of single- and dual-channel connectors to reach your installation needs. Great for adding wires to an existing installation or starting a new one. Rated for 10 Amps at 300V AC/DC.
These dual-conductor quick wire connectors are perfect for connections that need to be assembled and reassembled into different configurations. Connectors are designed with interlocking ends and easily snap together. The non-weatherproof, insulated wire splice connectors are designed for 22-18 gauge wire and have a secure snap closure to hold wires in place; there's no need to strip wire insulation. Each connector is rated for 6 Amps at 36VDC or 25 VAC. Price per pair. Also available in a 3-connector kit with Y splitter.
Use this butt connector to connect and seal 16-14 AWG wire. The insulated vinyl terminal protects wire connections from water, salt, and corrosion. Seal with a heat gun.
Use this interconnect cable to join T5 Linkable Linear LED Task Lights. It's compatible with 12v and 120V integrated T5 lights and is available in 1' or 3.28' lengths.
These dual-conductor quick wire connectors are perfect for connections that need to be assembled and reassembled into different configurations. Connectors are designed with interlocking ends and easily snap together or into the included Y splitter. The kit includes 3 wire splice connectors, Y splitter, and a double-sided 3M adhesive pad. The non-weatherproof, insulated wire splice connectors are designed for 22-18 gauge wire and have a secure snap closure to hold wires in place; there's no need to strip wire insulation. Each connector is rated for 6 Amps at 36VDC or 25 VAC. If both outputs are being used on the Y splitter, connectors can handle 3 amps each. Connectors are also sold as a pair.
Use this butt connector to connect and seal 12-10 AWG wire. The insulated vinyl terminal protects wire connections from water, salt, and corrosion. Seal with a heat gun.
Non-weatherproof Insulated Displacement Female Quickslide Disconnect Terminal Splice Tap for 22 to 18 Gauge wire. Insert the wire and crimp down with pliers to make a quick mid-span connection. Use mating CMP-164 1/4" Male Push On Connector seen above. Price for each.
Use these 18-16 AWG orange wire connectors for closed-end connections and secure splices. The twist-on wire connectors tighten with out ratcheting and feature a deep skirt to prevent bare wire from being exposed. These wire connectors can be removed and reused.
Use these pigtail power cords with your 12V or 120V T5 Linkable Linear LED Light Fixtures. Wire 12V T5 lights into a compatible power supply or 12V system, or wire 120V T5 lights into your home electrical system. The pigtail power cords can also be used to create custom interconnections.
Use this 120V TRIAC dimmer for dimmable LED bulbs and fixtures. It has a paddle switch for on/off functionality and a small slider for dimming. The single-pole dimmer can be used to control lights from 1 location. Use the integrated low-end trim adjustment dial to achieve your fixture or bulb's lowest light level with out flickering. This 120V 60Hz LED dimmer has a 150-watt max for LEDs (150-watt max for CFL bulbs and 600-watt max for incandescent bulbs).
Use this 120V TRIAC dimmer for dimmable LED bulbs and fixtures. It has a paddle switch for on/off functionality and a small slider for dimming. The 3-way dimmer can be used to control lights from 2 locations or can be used for single-pole installation. Use the integrated low-end trim adjustment dial to achieve your fixture or bulb's lowest light level with out flickering. This 120V 60Hz LED dimmer has a 150-watt max for LEDs (150-watt max for CFL bulbs and 600-watt max for incandescent bulbs).
Parallel bonded three conductor 18 gauge 3x18 stranded power wire for installations. This standard SJT cable is ideal for high voltage applications. Price per foot.
Reviews
93%
4.7 / 5 stars
64 reviews
Write Your Own Review
Review Guidelines
superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
Review text does not pertain to the product
Abusive and offensive language
Photos are not related to the reviewed product
Any violation of laws and/or copyrighted material
Unrelated hyperlinks/URLs
Choose sharing option
×
Email
URL
Save 10% on all orders by joining our mailing list