5m Turtle-Friendly Water Resistant Outdoor LED Strip Light - Amber LED Tape Light - IP65 - 12V / 24V
Part Number:
EC-IP64-Color-TF-5m
Manufacturer Part Number:
$57.99
ea.
Was
In Stock
Similar Products Available Today
Features
- Turtle-friendly 590nm amber light protects marine, nocturnal, and migratory species
- IP65-rated to resist dust and splashing water
- 18 LEDs/ft for consistent light output
- Durable silicone coating protects against abrasion and harsh conditions
- Cut points are located every 1.9 in. for 12V strips and 3.9 in. for 24V strips
- Lifetime warranty
Ask About This Product
Get instant AI-powered answers
Try asking:
Total Price:
Loading...
Most Popular Compatible Products
Overview
The 5m Turtle-Friendly Water Resistant Outdoor LED Strip Light is a part of our Radiant Series, designed to produce a saturated color for unique ambient light applications. The 590nm amber strip combines brilliant illumination and nighttime visibility with minimal environmental impact. It is IP65-rated with an ultra-thin silicone spray coating that protects against ingress from water and debris. The peel-and-stick 3M™ adhesive backing enables fast and easy mounting to various surfaces. The strip is 0-100% PWM dimmable with an optional controller. To learn more about turtle-friendly lighting, read our blog post found here.
Product Details:
- Class 2 Max Run: 11m (12V); 18m (24V)
- Strip Width is 8mm
- PWM Dimmable
- 3M™ adhesive backing
- 590nm Amber LEDs
- CE Certified; UL Listed
- Lifetime Warranty
Documents
EC-IP64-Color-TF-5m Specification Sheet Dimensional Drawings
Applications:
- Beachfront Properties
- Boardwalks
- Parks
- Pathways
- Piers
- Walkways
Super Bright LEDs, Inc. warrants that products carrying a lifetime warranty will be free from defects in the material and workmanship for the lifetime of the product. If Super Bright LEDs verifies that the defect was not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product with the same product. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Super Bright LEDs administers all warranty claims in-house. Read More
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Listed label means that product samples have been tested by UL and that the product meets their Standards for Safety requirements.
Turtle-friendly lighting is designed to drastically reduce the disorientating effects of artificial light pollution on the nesting instincts of turtles and other coastal wildlife. Fixtures that are designed to be turtle-friendly will have an ultra-warm or amber color temperature with a wavelength longer than 560 nanometers. They are full cutoff fixtures where most of the light is directed downward, minimizing the effect on the beach or night sky.
Use turtle-friendly lights in beachfront and coastal locations to ensure they remain dark enough for wildlife navigation while still offering adequate lighting for people. Learn more about the importance of Turtle-Friendly lighting in our Knowledge Base blog.
Use turtle-friendly lights in beachfront and coastal locations to ensure they remain dark enough for wildlife navigation while still offering adequate lighting for people. Learn more about the importance of Turtle-Friendly lighting in our Knowledge Base blog.
Ask About This Product
Get instant AI-powered answers
Try asking:
Products Mentioned
Press Enter to send, Shift+Enter for new line
Responses are AI-generated from product documentation. For confirmation or more information, contact Super Bright LEDs customer service.
Conversations are recorded for quality assurance. More information
Ask About This Product
Get instant AI-powered answers
Try asking:
Products Mentioned
Press Enter to send, Shift+Enter for new line
Responses are AI-generated from product documentation. For confirmation or more information, contact Super Bright LEDs customer service.
Conversations are recorded for quality assurance. More information
Ask About This Product
Get instant AI-powered answers
Try asking:
Specifications
| Ambient Operating Temperature | -20 to 60 °C (-4 to 140 °F) |
|---|---|
| Certifications/Compliance | CE, UL Listed |
| Dimmable | Yes |
| Dimmer Type | PWM |
|
Environmental Rating
Environmental Rating
Suitable for Dry Locations This marking indicates that you can use the light or component in a location not normally subject to dampness. This may include locations exposed to temporary dampness, such as a building under construction, provided that ventilation is adequate to prevent moisture accumulation. Use these fixtures in living rooms, bedrooms, offices, hallways, and similar areas. The marking may be "SUITABLE FOR DAMP LOCATIONS" or "DRY LOCATIONS ONLY."Suitable for Damp Locations Fixtures marked “SUITABLE FOR DAMP LOCATIONS” or “SUITABLE FOR WET LOCATIONS” can be installed in damp locations. A damp location is an exterior or interior location regularly or occasionally subject to moisture condensation on or around electrical equipment. It includes partially protected places such as covered patios and porches. Damp locations include any regularly muggy or humid area, such as above a kitchen sink or stove, and appropriately vented bathrooms near the tub or shower.Suitable for Wet Locations Fixtures and components marked "SUITABLE FOR WET LOCATIONS" can be installed in wet or damp locations. A wet location is anywhere water or other liquids may drip, splash, or flow on or against electrical equipment. A light marked "SUITABLE FOR WET LOCATIONS" may have additional markings that tell where and at what height it can be safely mounted. Uncovered outdoor areas like decks, gazebos, walls, and typical landscape lighting sites all fall under the heading of wet locations. |
Suitable for Damp Locations, Weatherproof |
| Finish | White |
| Input Connection Type | Pigtail |
|
IP Rating
IP Rating
 |
IP65 |
|
LED Beam Angle
LED Beam Angle
Beam angle is used to express the width of the light emitting from the source. The narrower the beam angle the more focused the light energy is. Comparing two 40 watt lights one with a beam angle of 30(a) and another with a beam angle of 90(b), They both produce the same amount of light output but (a) will appear brighter in the beam angle compared to (b) at the sacrifice of light spread.
|
120° |
|
LED Beam Angle
LED Beam Angle
Beam angle is used to express the angular dimension of light emitted from its source. The narrower the beam angle the more focused the light. Comparing two lights with the same lumen output, one with a 30° beam angle and another with a 90° beam angle, the 30° will appear brighter compared to the 90°, while the 90° will illuminate a larger area. Lights with a symmetrical output may have a beam angle expressed with a single value (e.g. W 120° x H 120° will be shown as 120°). Bulbs will typically have a single value expressing the outward beam angle projected at 360° (e.g. 120° is actually 360° x 120°).
|
120° |
| LED Color | Amber |
| Wavelength | 590 nm |
| LED Density | 18 LEDs/ft |
| LED Chip Type | 3528 SMD |
| Length | 16.4 ft (5 m) |
| LED Lifetime | 50000 Hours |
| Series | Radiant |
| Strip Width | 8mm (0.31in) |
| Wattage | 24 Watts |
| Wattage per Foot | 1.5 W/ft |
| Wire Gauge | 22 AWG |
| Wire Length | 19 in. |
| Part NO |
Current Draw
Current Draw
Current draw is calculated using the following formula: W/V = A, where W = the amount of power your light needs (wattage), V is the electrical system voltage (e.g., 120V AC), and A = amps. An ampere or amp (A) is the standard unit for electrical current. A milliamp (mA) equals one-thousandth of an amp, or 1000 mA is equivalent to 1 A.
Choosing LED fixtures with the correct amperage ensures safe and proper operation, preventing damage or injury. We recommend having all electrical components and fixtures installed by a certified professional electrician or lighting technician in compliance with all relevant standards and regulations. |
Current Draw per Foot
Current Draw per Foot
Current Draw Per Foot is used to size power supplies, normally converted to watts per foot. This is equated using total wattage divided by number of linear feet. Current draw per foot is the amount of current consumed by an LED or LEDs in an electrical circuit per linear foot at a specific voltage, measured in milliamps (mA) or watts (W).
|
LEDs per Segment |
Max Run (Class 2)
Max Run (Class 2)
The Max Run of an LED strip is dependent on two things, voltage and density. 24 volt strips in most instances will give you a longer run than a 12 volt strip. However the LED density of the strip will have an effect on the maximum run. If your install needs to extend beyond a strips Max Run additional power feeds can be run back to your power supply.   |
Minimum Cut Length | Operating Voltage | Product Dimensions |
|---|---|---|---|---|---|---|---|
| STW-B-BYEL-B3C-08B5M-12V | 2 A | 122 mA | 3 | 36.1 ft (11 m) | 50mm (1.97in) | 12 VDC | 196.85″ x 0.31″ x 0.11″ |
| STW-B-BYEL-B6C-08B5M-24V | 1 A | 61 mA | 6 | 59 ft (18 m) | 100mm (3.9in) | 24 VDC | 196.85″ x 0.31″ x 0.12″ |
Accessories & Power Supplies
Reviews
Customer Submitted Photos
Write Your Own Review
Review Guidelines
Super Bright LEDs reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs
Recently Viewed
Get a Quote for
Get 10%
off your order
And be the first to know about the new products, sales, and more.
By providing your phone number, you agree to receive marketing text messages about new
products,
sales, and more.
Consent is not a condition to purchase. Msg and data rates my apply.
Reply HELP for help and STOP to cancel. View our Terms
of
Service and Privacy Policy.
There was an error while subscribing your email address
Please try again later
This email address is already subscribed to our mailing list
Thank you for being a subscriber!
Thank you for signing up!
An email has been sent to
This email address previously signed up to receive emails.
Only first-time subscribers are eligible for % off their next order.
Loading...
Item Added
Part Number:
No accessories available for this product.
Loading...
Loading...