Waterproof Integrated LED Light Bar - 195 lm/ft - 12V - 3000K / 4000K / 5700K - 1ft / 2ft
Features
- Durable, magnetic aluminum design
- IP67 waterproof rated
- Up to 195 lm/ft
- Wide 120-degree angle
Try asking:
Loading recommendations...
Overview
The LED linear light bar is a versatile solution for indoor and outdoor lighting needs. Just under an inch wide, this waterproof light can discreetly attach to any metal surface. The corrosion-resistant aluminum body is ideal for RVs, decks, bookshelves, and cabinets. This powerful light emits 195 lumens per foot at a 120-degree beam angle, providing a wide, fan-like throw. Link up to six 1ft fixtures together and up to three 2ft fixtures for a max run of 6ft using the pigtail wires.
Product Details:
- Aluminum housing and clear, durable lens
- Waterproof IP67 rating
- Wide 120° beam angle
- Max run: 6-feet
- Pulse Width Modulation Dimming- 0-100%
- 12 VDC
- 5-year warranty
- Bookshelves
- Cabinets
- Cove Lighting
- Off Grid Lighting
- Showcases
- Trade Shows
- Under-Cabinets
Ask About This Product
Get instant AI-powered answers
Try asking:
Products Mentioned
Press Enter to send, Shift+Enter for new line
Responses are AI-generated from product documentation. For confirmation or more information, contact Super Bright LEDs customer service.
Conversations are recorded for quality assurance. More information
Ask About This Product
Get instant AI-powered answers
Try asking:
Products Mentioned
Press Enter to send, Shift+Enter for new line
Responses are AI-generated from product documentation. For confirmation or more information, contact Super Bright LEDs customer service.
Conversations are recorded for quality assurance. More information
Try asking:
Specifications
| Ambient Operating Temperature | -10 to 60 °C (14 to 140 °F) |
|---|---|
| Dimmable | Yes |
| Dimmer Type | PWM |
| Input Connection Type | Pigtail |
|
IP Rating
IP Rating
![]() |
IP67 |
|
LED Beam Angle
LED Beam Angle
Beam angle is used to express the angular dimension of light emitted from its source. The narrower the beam angle the more focused the light. Comparing two lights with the same lumen output, one with a 30° beam angle and another with a 90° beam angle, the 30° will appear brighter compared to the 90°, while the 90° will illuminate a larger area. Lights with a symmetrical output may have a beam angle expressed with a single value (e.g. W 120° x H 120° will be shown as 120°). Bulbs will typically have a single value expressing the outward beam angle projected at 360° (e.g. 120° is actually 360° x 120°).
|
120° |
| LED Lifetime | 30000 Hours |
| Lumens Per Foot | 195 lm/ft |
| Operating Voltage | 12 VDC |
| Strip Width | 21mm (0.83in) |
| Wire Length | 10.25 in. |
| Part NO |
Color Temperature
Color Temperature
![]() Correlated Color Temperature is the hue, or tint of white to expect from a light source and is measured in kelvin. Lower numbers give off a warmer white that is closer to candle light, and is good for relaxed and cozy spaces. Higher numbers give off a cooler white light that will appear more blueish. While values to the middle of the spectrum give off a more neutral or natural white light that is similar to daylight. |
Current Draw
Current Draw
Current draw is calculated using the following formula: W/V = A, where W = the amount of power your light needs (wattage), V is the electrical system voltage (e.g., 120V AC), and A = amps. An ampere or amp (A) is the standard unit for electrical current. A milliamp (mA) equals one-thousandth of an amp, or 1000 mA is equivalent to 1 A.
Choosing LED fixtures with the correct amperage ensures safe and proper operation, preventing damage or injury. We recommend having all electrical components and fixtures installed by a certified professional electrician or lighting technician in compliance with all relevant standards and regulations. |
Dimensions | Efficacy | LED Color | LEDs per Segment | Length |
Max Run (Class 2)
Max Run (Class 2)
The Max Run of an LED strip is dependent on two things, voltage and density. 24 volt strips in most instances will give you a longer run than a 12 volt strip. However the LED density of the strip will have an effect on the maximum run. If your install needs to extend beyond a strips Max Run additional power feeds can be run back to your power supply. ![]() ![]() |
Wattage | Wattage per Foot |
|---|---|---|---|---|---|---|---|---|---|---|
| WLF-CW30SMD | 5700K | 210 mA | 12in | 72 lm/W | Cool 5700K | 30 | 12 in. (1 ft) | 6 | 2.5 Watts | 2.6 W/ft |
| WLF-CW60SMD | 5700K | 400 mA | 24in | 81 lm/W | Cool 5700K | 60 | 24 in. (2 ft) | 3 | 4.8 Watts | 2.4 W/ft |
| WLF-NW30SMD | 4000K | 210 mA | 72 lm/W | Natural 4000K | 30 | 12 in. (1 ft) | 6 | 2.5 Watts | 2.6 W/ft | |
| WLF-NW60SMD | 4000K | 400 mA | 81 lm/W | Natural 4000K | 60 | 24 in. (2 ft) | 3 | 4.8 Watts | 2.4 W/ft | |
| WLF-WW30SMD | 3000K | 210 mA | 52 lm/W | Warm 3000K | 30 | 12 in. (1 ft) | 6 | 2.5 Watts | 2.5 W/ft | |
| WLF-WW60SMD | 3000K | 400 mA | 81 lm/W | Warm 3000K | 60 | 24 in. (2 ft) | 3 | 4.8 Watts | 2.4 W/ft |
Accessories & Power Supplies
Reviews
Review Guidelines
Super Bright LEDs reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs



