Linear LED Light Bar Fixture - 100 lm/ft
Part Number:
EGLB-x
Manufacturer Part Number:
Starting at
$16.99
ea.
Starting at
Was
Clearance
Related Products
Overview
LuxBar Linear LED Light Bars are an extremely versatile solution for both automotive and indoor lighting needs such as cabinet lighting, under-cabinet lighting, interior vehicle lighting, bookshelf lighting, police/emergency vehicle task lighting, footwell lights, and trunk/cargo lights. The aluminum fixtures are available in 18", 35", or 44" lengths, and the LED light bars deliver smooth, flawless illumination with out visible bulbs or hot spots. Each light bar fixture has powerful 3014 SMD LEDs that emit up to 360 lumens of natural white, cool white, red, green, or blue illumination. And with a CRI (color rendering index) of 84, light from this LED fixture will represent the true color of any object or surrounding. Each extruded aluminum light bar has screw mounting tabs on both ends and is equipped with a plug-and-play CPS connector. The non-weatherproof LED light bar fixture operates with in a 9-14.5 VDC range to match your car's electrical system.
Documents
EGLB-x Specification Sheet Applications:
- Bookshelves
- Cabinets
- Cargo Lighting
- Display Cases
- Emergency Vehicles
- Footwells
- Trade Shows
- Trunk Lights
- Under-Cabinets
- Vehicle Interiors
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Super Bright LEDs administers all warranty claims in-house. Read More
Specifications
| Ambient Operating Temperature | -20 to 40 °C (-4 to 104 °F) |
|---|---|
| Dimmable | Yes |
|
Environmental Rating
Environmental Rating
|
Non-weatherproof |
| Finish | Black |
| Input Connection Type | 5.5 mm x 2.1 mm DC Barrel |
|
IP Rating
IP Rating
|
IP20 |
|
LED Beam Angle
LED Beam Angle
Beam angle is used to express the width of the light emitting from the source. The narrower the beam angle the more focused the light energy is. Comparing two 40 watt lights one with a beam angle of 30(a) and another with a beam angle of 90(b), They both produce the same amount of light output but (a) will appear brighter in the beam angle compared to (b) at the sacrifice of light spread.
|
160° |
| LED Lifetime | 50000 Hours |
|
Operating Voltage
Operating Voltage
LED Strip Light Voltages – What You Need to KnowChoosing the correct voltage for your LED tape lights ensures optimal performance, safety, and ease of installation. Here’s a quick guide to help you decide: 
12 Volt ACCommon in landscape lighting setups, 12 VAC strips work with standard low-voltage AC transformers and are best suited for fixed outdoor applications such as landscape, hardscape, and deck lighting projects. 
12 Volt DCThese strip lights are a go-to choice for smaller projects and mobile applications like RVs, boats, and vehicles. They are easy to work with, highly flexible, and perfect for short runs up to ~16 ft. 
24 Volt DCIdeal for residential and commercial projects, 24 VDC strips are becoming the new industry standard. They offer longer run lengths (up to ~32 ft) with reduced voltage drop and increased efficiency. 
36 Volt DCOffering extended runs with consistent brightness and reduced power loss across longer distances, 36 VDC strips are well suited for medium to large-scale installations. 
48 Volt DCThese strips deliver optimal performance and the longest runs (40+ ft) of DC strip lights. Their ultra-low current draw minimizes heat and allows for thinner, more efficient wiring. 
120 Volt ACThese high-voltage strips offer a plug-and-play strip lighting solution compatible with standard household wall outlets. They operate free from external drivers, simplifying project design and installation. They offer the longest max run (50–150+ ft) without a noticeable voltage drop. They are best suited for large areas, architectural lighting, and outdoor use. |
9-14.5 VDC |
| Strip Width | 10mm (0.39in) |
| Wire Length | 10 in. |
| Part NO |
Current Draw
Current Draw
Current draw is calculated using the following formula: W/V = A, where W = the amount of power your light needs (wattage), V is the electrical system voltage (e.g., 120V AC), and A = amps. An ampere or amp (A) is the standard unit for electrical current. A milliamp (mA) equals one-thousandth of an amp, or 1000 mA is equivalent to 1 A.
Choosing LED fixtures with the correct amperage ensures safe and proper operation, preventing damage or injury. We recommend having all electrical components and fixtures installed by a certified professional electrician or lighting technician in compliance with all relevant standards and regulations. |
LED Color | Length | Lumens Per Foot | Series | Wattage | Wattage per Foot |
|---|---|---|---|---|---|---|---|
| EGLB-B35 | 550 mA | Blue | 35 in. (2.92 ft) | 17 lm/ft | 7 Watts | 2.5 W/ft | |
| EGLB-B44 | 700 mA | Blue | 44.1 in. (3.7 ft) | 16 lm/ft | 10 Watts | 2.6 W/ft | |
| EGLB-G18 | 300 mA | Green | 18 in. | 67 lm/ft | 4 Watts | 2.7 W/ft | |
| EGLB-G35 | 550 mA | Green | 35 in. (2.92 ft) | 65 lm/ft | 7 Watts | 2.5 W/ft | |
| EGLB-G44 | 680 mA | Green | 44.1 in. (3.7 ft) | 65 lm/ft | 9 Watts | 2.5 W/ft | |
| EGLB-R18 | 270 mA | Red | 18 in. | 31 lm/ft | 4 Watts | 2.4 W/ft | |
| EGLB-R44 | 630 mA | Red | 44.1 in. (3.7 ft) | 30 lm/ft | 9 Watts | 2.3 W/ft |
Reviews
Customer Submitted Photos
Write Your Own Review
Review Guidelines
Super Bright LEDs reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs
