White Flexible LED Strip Lights
Filter
-
1
5m Single Color LED Black PCB Strip Light - Eco Series Tape Light - Dimmable - 12V - IP64 - 3000K / 4000K / 6500K 5m Single Color LED Black PCB Strip Light - Eco Series Tape Light - Dimmable - 12V - IP64 - 3000K / 4000K / 6500K
ShowHide specs-
Color Options
-
WhitesCool 6500KNatural 4000KWarm 3000K
- Lumens per Foot
-
115 lm
- Wattage per Foot
- 1.4 W/ft
- Voltage
- 12 VDC
-
IP Rating
- IP64
-
Color Options
-
2
30m Black PCB White LED Strip Light - 90+ CRI Tape Light - 24V - IP20 - Contractor Reel 30m Black PCB White LED Strip Light - 90+ CRI Tape Light - 24V - IP20 - Contractor Reel
ShowHide specs
-
Color Options
-
WhitesCool 6500KCool 5000KNatural 4000KWarm 3000K
- Lumens per Foot
-
255 lm
- Wattage per Foot
- 3.6 W/ft
- Voltage
- 24 VDC
-
IP Rating
- IP20
-
Color Options
Are you having trouble finding something?
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Super Bright LEDs administers all warranty claims in-house. Read More
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
Super Bright LEDs, Inc. warrants that products carrying a lifetime warranty will be free from defects in the material and workmanship for the lifetime of the product. If Super Bright LEDs verifies that the defect was not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product with the same product. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Super Bright LEDs administers all warranty claims in-house. Read More
Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Listed label means that product samples have been tested by UL and that the product meets their Standards for Safety requirements.
Filter
How do I install LED strip lights?
Before getting started, ensure you have all the supplies necessary: flexible LED strip lights, wiring, power supply, controller, etc. Our LED strip light kits make this a breeze and include everything you will need.
Below are general instructions. However, the installation will vary depending on your application. Consult the manual or provided instructions.
- Test the lights before getting started by plugging them into a power source, ensuring they function properly. Unplug after verifying.
- Measure the location in which you want the lights.
- Clean the surface you are placing the lights and let dry.
- Cut the strip lights to the required length making sure to only cut in designated cut spots. Then connect to a power source and test the lights once more. Disconnect from power after.
- Remove the adhesive backing, align, and apply to surface.
- Connect to power source.
How many feet of wire will I need?
We tend to recommend a minimum of 25 feet of wire per 5 meters to ensure you have enough in case cutting mistakes are made.
Are white LED strips dimmable?
Yes, most of our white LED strip lights are dimmable from 0-100%. There are remotes and wall dimmers that can be used to control the brightness of strips.
How do I control the CCT of the white led strip lights?
To control the CCT, you will need a tunable LED light strip and and a controller. Most of our tunable white LED strip lights are able to change between 3000-6500K CCT.
What kind of controller do I need?
Depending on the LED light strips you choose, you have the option to control them with a remote, smartphone, Wi-Fi, Bluetooth, wall switch, or inline wired controllers.
We offer controllers that only adjust the brightness to controllers that can be used to change the colors, brightness, CCTs, and modes.
What voltage do I need for my strip lights?
This depends on your application. If you are mounting them in a vehicle, a 12-volt strip most likely would be required. For most applications, 12 volts will work unless you want longer runs, in which a 24-volt strip would be ideal.
How do I know if the strip lights I have are submersible, weatherproof, or waterproof? What is the difference?
To determine which type of LED strip lights you have, look at the IP rating and compare it to the chart below:
|
Strip Light Type |
IP Rating |
Purpose |
|
Weatherproof |
IP63-IP64 |
Rated to withstand typical moisture such as rain, sprinklers, and are abrasion resistant. |
|
Waterproof |
IP65-IP67 |
Good for outdoor spaces such as swimming pools, decks, etc. |
|
Submersible |
IP68 and up |
Can be submerged in up to a meter of water and still perform |
