5m LED Strip Light - White LED Tape Light - IP20 - 12V / 24V - 18 LEDs/ft or 36 LEDs/ft
Part Number:
HL-IP20-80CRI-5m
Manufacturer Part Number:
$39.99
ea.
Was
In Stock
Similar Products Available Today
Features
- Constructed with powerful and efficient 2835 SMD LEDs
- Delivers 395 lm/ft with 18 LEDs/ft or 471 lm/ft with 36 LEDs/ft
- Dedicated cut points located 25mm, 50mm, or 100mm, indicated by the copper pads
- Lifetime warranty
Ask About This Product
Get instant AI-powered answers
Try asking:
Total Price:
Loading...
Most Popular Compatible Products
Overview
The 5m White LED Strip Light is a part of our HighLight Series, constructed with high-quality LEDs for professional-grade installation and consistent performance. This tape light is available in white color temperatures of 3000K, 4000K, and 5000K. Each strip has 18 LEDs/ft or 36 LEDs/ft, emitting up to 471 lm/ft. Cut points are located every 25mm (1.0in) or 50mm (1.97in) on 12V strips and 50mm (1.97in) or 100mm (3.9in) on 24V strips so the strip can be tailored to the application. Constructed with 2835 SMD LEDs, the strips use a maximum of 3.7 W/ft or 4.2 W/ft for low power consumption and high energy efficiency. The 12V strip has a Class 2 max run of 13.1 ft (4 m) or 14.8 ft (4.5 m) and the 24V strip has a Class 2 max run of 21.3 ft (6.5 m) or 24.6 ft (7.5 m). Each strip is designed with a durable 3M™ Adhesive backing for simple installation. For a finished look, install the strip using an aluminum channel and a lens for a more diffused light output.
Product Details:
- Class 2 Max Run:
- 18 LEDs/ft- 4.5 m (12V), 7.5 m (24V)
- 36 LEDs/ft- 4 m (12V), 6.5 m (24V)
- Strip width measures 10mm
- PWM Dimmable
- 3M™ adhesive backing
- Pigtail connection
- CE Certified and UL listed
- Lifetime warranty
Documents
HL-IP20-80CRI-5m Specification Sheet Dimensional Drawings
Applications:
- Bars and Restaurants
- Countertop Lighting
- Cove Lighting
- Display Cases
- Retail Shops
- Task Lighting
- Toe Kick Lighting
- Trade Shows
- Under-Cabinets
Super Bright LEDs, Inc. warrants that products carrying a lifetime warranty will be free from defects in the material and workmanship for the lifetime of the product. If Super Bright LEDs verifies that the defect was not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product with the same product. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Super Bright LEDs administers all warranty claims in-house. Read More
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Listed label means that product samples have been tested by UL and that the product meets their Standards for Safety requirements.
LED Strip Lights FAQs
What is color temperature? Which one is best?
What LED strip light accessories do I need?
The only thing you need for certain to power a strip light is a power supply. We offer accessories used for installation, such as connectors and aluminum mounting channels. As well as others that add functionality such as such as dimmers, switches, and remote controls. Complete kits are also offered which include everything you need to get started.
Ask About This Product
Get instant AI-powered answers
Try asking:
Products Mentioned
Press Enter to send, Shift+Enter for new line
Responses are AI-generated from product documentation. For confirmation or more information, contact Super Bright LEDs customer service.
Conversations are recorded for quality assurance. More information
Ask About This Product
Get instant AI-powered answers
Try asking:
Products Mentioned
Press Enter to send, Shift+Enter for new line
Responses are AI-generated from product documentation. For confirmation or more information, contact Super Bright LEDs customer service.
Conversations are recorded for quality assurance. More information
Ask About This Product
Get instant AI-powered answers
Try asking:
Specifications
| Ambient Operating Temperature | -20 to 60 °C (-4 to 140 °F) |
|---|---|
| Certifications/Compliance | CE, UL Listed |
| CRI | 80+ |
| Dimmable | Yes |
| Dimmer Type | PWM |
|
Environmental Rating
Environmental Rating
Suitable for Dry Locations This marking indicates that you can use the light or component in a location not normally subject to dampness. This may include locations exposed to temporary dampness, such as a building under construction, provided that ventilation is adequate to prevent moisture accumulation. Use these fixtures in living rooms, bedrooms, offices, hallways, and similar areas. The marking may be "SUITABLE FOR DAMP LOCATIONS" or "DRY LOCATIONS ONLY."Suitable for Damp Locations Fixtures marked “SUITABLE FOR DAMP LOCATIONS” or “SUITABLE FOR WET LOCATIONS” can be installed in damp locations. A damp location is an exterior or interior location regularly or occasionally subject to moisture condensation on or around electrical equipment. It includes partially protected places such as covered patios and porches. Damp locations include any regularly muggy or humid area, such as above a kitchen sink or stove, and appropriately vented bathrooms near the tub or shower.Suitable for Wet Locations Fixtures and components marked "SUITABLE FOR WET LOCATIONS" can be installed in wet or damp locations. A wet location is anywhere water or other liquids may drip, splash, or flow on or against electrical equipment. A light marked "SUITABLE FOR WET LOCATIONS" may have additional markings that tell where and at what height it can be safely mounted. Uncovered outdoor areas like decks, gazebos, walls, and typical landscape lighting sites all fall under the heading of wet locations. |
Non-Weatherproof, Suitable for Dry Locations |
| Finish | White |
| Input Connection Type | Pigtail |
|
IP Rating
IP Rating
 |
IP20 |
|
LED Beam Angle
LED Beam Angle
Beam angle is used to express the angular dimension of light emitted from its source. The narrower the beam angle the more focused the light. Comparing two lights with the same lumen output, one with a 30° beam angle and another with a 90° beam angle, the 30° will appear brighter compared to the 90°, while the 90° will illuminate a larger area. Lights with a symmetrical output may have a beam angle expressed with a single value (e.g. W 120° x H 120° will be shown as 120°). Bulbs will typically have a single value expressing the outward beam angle projected at 360° (e.g. 120° is actually 360° x 120°).
|
120° |
| LED Chip Type | 2835 SMD |
| Length | 16.4 ft (5 m) |
| LED Lifetime | 50000 Hours |
| Product Dimensions | 196.85″ x 0.39″ x 0.05″ |
| Series | HighLight |
| Strip Width | 10mm (0.39in) |
| Wire Gauge | 20 AWG |
| Wire Length | 19 in. |
| Part NO |
Color Temperature
Color Temperature
 Correlated Color Temperature is the hue, or tint of white to expect from a light source and is measured in kelvin. Lower numbers give off a warmer white that is closer to candle light, and is good for relaxed and cozy spaces. Higher numbers give off a cooler white light that will appear more blueish. While values to the middle of the spectrum give off a more neutral or natural white light that is similar to daylight. |
Current Draw
Current Draw
Current draw is calculated using the following formula: W/V = A, where W = the amount of power your light needs (wattage), V is the electrical system voltage (e.g., 120V AC), and A = amps. An ampere or amp (A) is the standard unit for electrical current. A milliamp (mA) equals one-thousandth of an amp, or 1000 mA is equivalent to 1 A.
Choosing LED fixtures with the correct amperage ensures safe and proper operation, preventing damage or injury. We recommend having all electrical components and fixtures installed by a certified professional electrician or lighting technician in compliance with all relevant standards and regulations. |
Current Draw per Foot
Current Draw per Foot
Current Draw Per Foot is used to size power supplies, normally converted to watts per foot. This is equated using total wattage divided by number of linear feet. Current draw per foot is the amount of current consumed by an LED or LEDs in an electrical circuit per linear foot at a specific voltage, measured in milliamps (mA) or watts (W).
|
Efficacy | LED Color | LED Density | LEDs per Segment | Lumens Per Foot |
Max Run (Class 2)
Max Run (Class 2)
The Max Run of an LED strip is dependent on two things, voltage and density. 24 volt strips in most instances will give you a longer run than a 12 volt strip. However the LED density of the strip will have an effect on the maximum run. If your install needs to extend beyond a strips Max Run additional power feeds can be run back to your power supply.   |
Minimum Cut Length | Operating Voltage | Wattage | Wattage per Foot |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| STN-B-A30K80-C3A-10B5M-12V | 3000K | 5 A | 305 mA | 108 lm/W | Warm 3000K | 18 LEDs/ft | 3 | 395 lm/ft | 14.8 ft (4.5 m) | 50mm (1.97in) | 12 VDC | 60 Watts | 3.7 W/ft |
| STN-B-A30K80-C3A-10C5M-12V | 3000K | 5.8 A | 354 mA | 112 lm/W | Warm 3000K | 36 LEDs/ft | 3 | 471 lm/ft | 13.1 ft (4 m) | 25mm (1.0in) | 12 VDC | 69 Watts | 4.2 W/ft |
| STN-B-A30K80-C6A-10B5M-24V | 3000K | 2.5 A | 152 mA | 108 lm/W | Warm 3000K | 18 LEDs/ft | 6 | 395 lm/ft | 24.6 ft (7.5 m) | 100mm (3.9in) | 24 VDC | 60 Watts | 3.7 W/ft |
| STN-B-A30K80-C6A-10C5M-24V | 3000K | 2.9 A | 177 mA | 112 lm/W | Warm 3000K | 36 LEDs/ft | 6 | 471 lm/ft | 21.3 ft (6.5 m) | 50mm (1.97in) | 24 VDC | 69 Watts | 4.2 W/ft |
| STN-B-A40K80-C3A-10B5M-12V | 4000K | 5 A | 305 mA | 108 lm/W | Natural 4000K | 18 LEDs/ft | 3 | 395 lm/ft | 14.8 ft (4.5 m) | 50mm (1.97in) | 12 VDC | 60 Watts | 3.7 W/ft |
| STN-B-A40K80-C3A-10C5M-12V | 4000K | 5.8 A | 354 mA | 112 lm/W | Natural 4000K | 36 LEDs/ft | 3 | 471 lm/ft | 13.1 ft (4 m) | 25mm (1.0in) | 12 VDC | 69 Watts | 4.2 W/ft |
| STN-B-A40K80-C6A-10B5M-24V | 4000K | 2.5 A | 152 mA | 108 lm/W | Natural 4000K | 18 LEDs/ft | 6 | 395 lm/ft | 24.6 ft (7.5 m) | 100mm (3.9in) | 24 VDC | 60 Watts | 3.7 W/ft |
| STN-B-A40K80-C6A-10C5M-24V | 4000K | 2.9 A | 177 mA | 112 lm/W | Natural 4000K | 36 LEDs/ft | 6 | 471 lm/ft | 21.3 ft (6.5 m) | 50mm (1.97in) | 24 VDC | 69 Watts | 4.2 W/ft |
| STN-B-A50K80-C3A-10B5M-12V | 5000K | 5 A | 305 mA | 108 lm/W | Cool 5000K | 18 LEDs/ft | 3 | 395 lm/ft | 14.8 ft (4.5 m) | 50mm (1.97in) | 12 VDC | 60 Watts | 3.7 W/ft |
| STN-B-A50K80-C3A-10C5M-12V | 5000K | 5.8 A | 354 mA | 112 lm/W | Cool 5000K | 36 LEDs/ft | 3 | 471 lm/ft | 13.1 ft (4 m) | 25mm (1.0in) | 12 VDC | 69 Watts | 4.2 W/ft |
| STN-B-A50K80-C6A-10B5M-24V | 5000K | 2.5 A | 152 mA | 108 lm/W | Cool 5000K | 18 LEDs/ft | 6 | 395 lm/ft | 24.6 ft (7.5 m) | 100mm (3.9in) | 24 VDC | 60 Watts | 3.7 W/ft |
| STN-B-A50K80-C6A-10C5M-24V | 5000K | 2.9 A | 177 mA | 112 lm/W | Cool 5000K | 36 LEDs/ft | 6 | 471 lm/ft | 21.3 ft (6.5 m) | 50mm (1.97in) | 24 VDC | 69 Watts | 4.2 W/ft |
Accessories & Power Supplies
Reviews
Customer Submitted Photos
Write Your Own Review
Review Guidelines
Super Bright LEDs reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs
Recently Viewed
Loading...
Loading...
Loading...