2016 Tunable White LED Strip Light/Tape Light - 24V - IP20 - 511 Lumens/ft
Part Number:
NFLS-VCTH1200
Manufacturer Part Number:
$79.99
ea.
Was
| Quantity | |
|---|---|
In Stock
Features
- Adjustable white color with a tunable white controller (sold separately)
- 24V For longer continuous runs
- Can be cut every 2"
- 3M™ Adhesive backing
- 0-100% Dimmable
Overview
This tunable white LED strip light emits 511 lumens of powerful illumination per foot. Color temperature can be adjusted from 2700K to 6500K with a tunable white controller (sold separately). The 16.4' high-density LED strip light operates on 24 VDC and can be used in longer runs than 12V strips. Easily cut it into separate 12-LED segments and install it with its peel-and-stick 3M™ adhesive backing. This strip is designed to last 30,000 hours. It's great for cabinets, under-cabinet lighting, toe-kicks, coves, bookshelves, or other indoor applications where space is limited. The light strip must be used with a class 2 power supply.
Documents
NFLS-VCTH1200 Specification Sheet Applications:
- Accent Lighting
- Backlighting
- Bias Lighting
- Cove Lighting
- Display Cases
- Off Grid Lighting
- Retail Shops
- Task Lighting
- Trade Shows
- Under-Cabinets
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Super Bright LEDs administers all warranty claims in-house. Read More
Tunable White
Tunable White bulbs and strips allow users to adjust the color temperature of the light output, ranging from warm to cool white, to suit different settings and preferences. This adjustability is achieved by mixing different proportions of white LEDs with varying color temperatures within a single fixture.
Specifications
|
Color Temperature
Color Temperature
Correlated Color Temperature is the hue, or tint of white to expect from a light source and is measured in kelvin. Lower numbers give off a warmer white that is closer to candle light, and is good for relaxed and cozy spaces. Higher numbers give off a cooler white light that will appear more blueish. While values to the middle of the spectrum give off a more neutral or natural white light that is similar to daylight. |
Tunable CCT |
|---|---|
| CRI | 90+ |
|
Current Draw
Current Draw
Current draw is calculated using the following formula: W/V = A, where W = the amount of power your light needs (wattage), V is the electrical system voltage (e.g., 120V AC), and A = amps. An ampere or amp (A) is the standard unit for electrical current. A milliamp (mA) equals one-thousandth of an amp, or 1000 mA is equivalent to 1 A.
Choosing LED fixtures with the correct amperage ensures safe and proper operation, preventing damage or injury. We recommend having all electrical components and fixtures installed by a certified professional electrician or lighting technician in compliance with all relevant standards and regulations. |
3 A |
|
Current Draw per Foot
Current Draw per Foot
Current Draw Per Foot is used to size power supplies, normally converted to watts per foot. This is equated using total wattage divided by number of linear feet. Current draw per foot is the amount of current consumed by an LED or LEDs in an electrical circuit per linear foot at a specific voltage, measured in milliamps (mA) or watts (W).
|
181mA |
| Dimmable | Yes |
| Dimmer Type | PWM |
| Efficacy | 118 lm/W |
|
Environmental Rating
Environmental Rating
|
Non-weatherproof |
| Finish | White |
| Input Connection Type | Pigtail |
|
IP Rating
IP Rating
|
IP20 |
|
LED Beam Angle
LED Beam Angle
Beam angle is used to express the width of the light emitting from the source. The narrower the beam angle the more focused the light energy is. Comparing two 40 watt lights one with a beam angle of 30(a) and another with a beam angle of 90(b), They both produce the same amount of light output but (a) will appear brighter in the beam angle compared to (b) at the sacrifice of light spread.
|
120° |
| LED Color | Tunable CCT |
| LED Density | 73 LEDs/ft |
| LED Type | 2016 SMD |
| LEDs per Segment | 12 |
| Length | 16.4 ft (5 m) |
| LED Lifetime | 30000 Hours |
| Lumens Per Foot | 511 lm/ft |
|
Max Run (Class 2)
Max Run (Class 2)
The Max Run of an LED strip is dependent on two things, voltage and density. 24 volt strips in most instances will give you a longer run than a 12 volt strip. However the LED density of the strip will have an effect on the maximum run. If your install needs to extend beyond a strips Max Run additional power feeds can be run back to your power supply. 
|
Up to 16.4ft (5m) |
| Minimum Cut Length | 50mm (1.97in) |
| Operating Voltage | 24 VDC |
| Series | Lux |
| Strip Width | 10mm (0.39in) |
| Wattage | 71 Watts |
| Wattage per Foot | 4.5 W/ft |
| Wire Length | 8 in (20.3 cm) |
Accessories & Power Supplies
Reviews
Customer Submitted Photos
Write Your Own Review
Review Guidelines
Super Bright LEDs reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs
