| Strip Specifications | |
| Beam Angle | 120° |
|---|---|
| Brightness | 259 lm/ft (848 lm/m) |
| CRI | 80+ |
| Dimmable | Yes |
| Input Voltage | 12 VDC |
| IP Rating | IP20 |
| LED Color Options | 3000K |
| LED Density | 18 LEDs/ft (60 LEDs/m) |
| LED Lifetime | 65000 Hours |
| LED Type | 2835 |
| Length | 8.2ft (2.5m) |
| Minimun Cut Length | 50mm (1.97in) |
| Standards And Certifications | CSA |
| Strip Width | 8mm (0.31in) |
| Wattage Per Foot | 2.8 W/ft (9.2 W/m) |
| Wattage Total | 23W |
| Remote/Controller Specifications | |
| Control Range | 49.2ft (15m) |
|---|---|
| Remote Battery Type | CR2032 (x1, included) |
| Remote Type | Handheld (RF) Remote |
| Power Supply Specifications | |
| Input Connection | 1-15P Plug |
|---|---|
| Input Voltage | 120 VAC |
| IP Rating | IP20 |
| Output Voltage | 12 VDC |
| Standards And Certifications | ETL Listed |
| Wattage | 36W |
$43.99 ea.
$18.99 ea.
$9.99 ea.
$9.99 ea.
$9.99 ea.
Connect an 8mm single color LED strip light to a 22 gauge pigtail power wire. The clear connector securely holds wires and strips in place.
$43.99 ea.
$18.99 ea.
$9.99 ea.
$9.99 ea.
$9.99 ea.
$18.99 ea.
$16.99 ea.
$15.99 ea.
Connect an 8mm single color LED strip light to a 22 gauge pigtail power wire. The clear connector securely holds wires and strips in place.
Connect an 8mm single color LED strip light to power. The adaptor has 4” power wires and the clear connector securely holds wires and strips in place.
Connect two 8mm single color LED strip lights together. The connector has 4” power wires and the clear connector securely holds wires and strips in place.
Connect two 8mm single-color LED strip lights together seamlessly. The clear connector securely holds the strips in place.
Connect two 8mm single-color LED strip lights together seamlessly. Use to run strip lights in corners.
Connect two 8mm single-color LED strip lights together in an ‘L’ shape. White polycarbonate connector secures and hides wires for a clean-looking application.
Connect an 8mm single color LED strip light to a standard 5.5mm DC barrel connector. The clear connectors securely hold the strip in place.
Connect three 8mm single-color LED strip segments together in a ‘T’ shape. White polycarbonate connector secures and hides wires for a clean-looking application.
Connect two 8mm single-color LED strip lights together seamlessly. Use to run strip lights in sharp corners.
Connect four 8mm single-color LED strip segments together in an ‘X’ shape. White polycarbonate connector secures and hides wires for a clean-looking application.
superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
