White Side-Emitting LED Strip Light - IP65 Water Resistant - 12V
Features
- Side-emitting LEDs direct light sideways for edge lighting and concealed installations
- IP65 water resistant for indoor and outdoor applications
- Provides up to 204 lm/ft with 36 LEDs/ft
- Cut points every 25 mm (1 inch)
Try asking:
Loading recommendations...
Overview
Illuminate edges, narrow spaces, and architectural details with this 5m White Side-Emitting LED Strip Light. Unlike traditional top-emitting strips, the side-emitting LEDs direct light parallel to the mounting surface, making them ideal for edge lighting, shelving, displays, decks, patios, and concealed accent installations. The slim design fits tight spaces, while IP65 water-resistant protection allows use in indoor and outdoor wet locations.
Available in 3000K, 4000K, and 6500K white, the strip delivers up to 204 lumens per foot for decorative and accent lighting. Its flexible 12V design features 3M™ adhesive backing and cut points every 25 mm (1 inch) for customized installations. PWM dimming provides adjustable brightness, while UL Listed construction and a 50,000-hour rated lifetime offer dependable performance. Backed by a lifetime warranty.
- Class 2 Max Run: 6500K is 5m; Other CCTs are 7.5m
- Strip Width is 7mm
- PWM Dimmable
- 3M™ adhesive backing
- 5.5 mm x 2.1 mm DC Barrel, Pigtail Connection
- 12 VDC
- UL Listed
- Lifetime warranty
- Backlighting
- Building Exteriors and Facades
- Decks
- Outdoor Accent Lights
- Outdoor Kitchens
- Patios
- Reflective Surfaces
- Toe Kick Lighting
- Under-Cabinets
LED Strip Lights FAQs
Ask About This Product
Get instant AI-powered answers
Try asking:
Products Mentioned
Press Enter to send, Shift+Enter for new line
Responses are AI-generated from product documentation. For confirmation or more information, contact Super Bright LEDs customer service.
Conversations are recorded for quality assurance. More information
Ask About This Product
Get instant AI-powered answers
Try asking:
Products Mentioned
Press Enter to send, Shift+Enter for new line
Responses are AI-generated from product documentation. For confirmation or more information, contact Super Bright LEDs customer service.
Conversations are recorded for quality assurance. More information
Specifications
| Certifications/Compliance | UL Listed |
|---|---|
| CRI | 80+ |
|
Current Draw
Current Draw
Current draw is calculated using the following formula: W/V = A, where W = the amount of power your light needs (wattage), V is the electrical system voltage (e.g., 120V AC), and A = amps. An ampere or amp (A) is the standard unit for electrical current. A milliamp (mA) equals one-thousandth of an amp, or 1000 mA is equivalent to 1 A.
Choosing LED fixtures with the correct amperage ensures safe and proper operation, preventing damage or injury. We recommend having all electrical components and fixtures installed by a certified professional electrician or lighting technician in compliance with all relevant standards and regulations. |
3 A |
| Dimmable | Yes |
| Dimmer Type | PWM |
|
Environmental Rating
Environmental Rating
Suitable for Dry Locations This marking indicates that you can use the light or component in a location not normally subject to dampness. This may include locations exposed to temporary dampness, such as a building under construction, provided that ventilation is adequate to prevent moisture accumulation. Use these fixtures in living rooms, bedrooms, offices, hallways, and similar areas. The marking may be "SUITABLE FOR DAMP LOCATIONS" or "DRY LOCATIONS ONLY."Suitable for Damp Locations Fixtures marked “SUITABLE FOR DAMP LOCATIONS” or “SUITABLE FOR WET LOCATIONS” can be installed in damp locations. A damp location is an exterior or interior location regularly or occasionally subject to moisture condensation on or around electrical equipment. It includes partially protected places such as covered patios and porches. Damp locations include any regularly muggy or humid area, such as above a kitchen sink or stove, and appropriately vented bathrooms near the tub or shower.Suitable for Wet Locations Fixtures and components marked "SUITABLE FOR WET LOCATIONS" can be installed in wet or damp locations. A wet location is anywhere water or other liquids may drip, splash, or flow on or against electrical equipment. A light marked "SUITABLE FOR WET LOCATIONS" may have additional markings that tell where and at what height it can be safely mounted. Uncovered outdoor areas like decks, gazebos, walls, and typical landscape lighting sites all fall under the heading of wet locations. |
Suitable for Wet Locations |
| Finish | White |
| Input Connection Type | 5.5 mm x 2.1 mm DC Barrel, Pigtail |
|
IP Rating
IP Rating
![]() |
IP65 |
|
LED Beam Angle
LED Beam Angle
Beam angle is used to express the angular dimension of light emitted from its source. The narrower the beam angle the more focused the light. Comparing two lights with the same lumen output, one with a 30° beam angle and another with a 90° beam angle, the 30° will appear brighter compared to the 90°, while the 90° will illuminate a larger area. Lights with a symmetrical output may have a beam angle expressed with a single value (e.g. W 120° x H 120° will be shown as 120°). Bulbs will typically have a single value expressing the outward beam angle projected at 360° (e.g. 120° is actually 360° x 120°).
|
120° |
| LED Density | 36 LEDs/ft |
| LED Chip Type | 3014 SMD |
| LEDs per Segment | 3 |
| Length | 16.4 ft (5 m) |
| LED Lifetime | 50000 Hours |
| Minimum Cut Length | 25mm (1.0in) |
| Operating Voltage | 12 VDC |
| Series | HighLight |
| Strip Width | 7mm (0.28in) |
|
Water Resistance
Water Resistance
Water ResistanceWater resistance specifications help ensure you choose a luminaire appropriate for your installation location. See the IP Rating and UL Environmental Rating for additional guidance.
|
Water Resistant |
| Wattage | 36 Watts |
| Wattage per Foot | 2.2 W/ft |
| Part NO | Ambient Operating Temperature |
Color Temperature
Color Temperature
![]() Correlated Color Temperature is the hue, or tint of white to expect from a light source and is measured in kelvin. Lower numbers give off a warmer white that is closer to candle light, and is good for relaxed and cozy spaces. Higher numbers give off a cooler white light that will appear more blueish. While values to the middle of the spectrum give off a more neutral or natural white light that is similar to daylight. |
Current Draw per Foot
Current Draw per Foot
Current Draw Per Foot is used to size power supplies, normally converted to watts per foot. This is equated using total wattage divided by number of linear feet. Current draw per foot is the amount of current consumed by an LED or LEDs in an electrical circuit per linear foot at a specific voltage, measured in milliamps (mA) or watts (W).
|
Efficacy | LED Color | Lumens Per Foot |
Max Run (Class 2)
Max Run (Class 2)
The Max Run of an LED strip is dependent on two things, voltage and density. 24 volt strips in most instances will give you a longer run than a 12 volt strip. However the LED density of the strip will have an effect on the maximum run. If your install needs to extend beyond a strips Max Run additional power feeds can be run back to your power supply. ![]() ![]() |
Product Dimensions | Wire Gauge | Wire Length |
|---|---|---|---|---|---|---|---|---|---|---|
| STW-AS65K80-E3D-05C5M-12V | -20 to 45 °C (-4 to 113 °F) | 6500K | 91mA | 85 lm/W | Cool 6500K | 186 lm/ft | 16.4 ft (5 m) | 20.4 in. | ||
| STW-B-AS30K80-E3D-05C5M-12V | -20 to 60 °C (-4 to 140 °F) | 3000K | 183 mA | 93 lm/W | Warm 3000K | 204 lm/ft | 24.6 ft (7.5 m) | 196.85″ x 0.28″ x 0.18″ | 22 AWG | 28 in. (2.3 ft) |
| STW-B-AS40K80-E3D-05C5M-12V | -20 to 60 °C (-4 to 140 °F) | 4000K | 183 mA | 93 lm/W | Natural 4000K | 204 lm/ft | 24.6 ft (7.5 m) | 196.85″ x 0.28″ x 0.18″ | 22 AWG | 28 in. (2.3 ft) |
Documents
Accessories & Power Supplies
Reviews
Review Guidelines
Super Bright LEDs reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs




