LED Step Lights - Rectangular Deck / Step Accent Light with Frosted Lens - 120V or 120V
Part Number
SLRE-x2-x
Customers Also Viewed
![LBFA-PPT LuxBar Pigtail Power Connector - 50cm[19.7in] Pigtail Wire](https://www.superbrightleds.com/media/catalog/product/cache/d1343b4c50f242b3ed8ff833169a453f/l/u/luxbarledpigtailpowerconnector-1.jpg)
Overview
Description
LED Deck/Step Lights are a great way to add distinct accent lighting and safety illumination to your steps or deck walkways. Wired directly to your home's electrical system or your low-voltage landscaping system, this jbox-ready light uses very little energy. The waterproof polycarbonate housing protects internal components, and a frosted glass lens gives sophisticated ambient lighting to your indoor and outdoor applications. Select a faceplate to match your designs.
A product that bears an ETL-Certified label has been evaluated by a Nationally Recognized Testing Laboratory (NRTL) and meets national product safety standards. An ETL certification is accepted in the U.S. and in Canada.
Super Bright LEDs, Inc. offers a 3-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More
Applications
- Gazebos
- Safety Lighting
- LED Stair Lights
- Entryways
- Pagoda Lights
- Backyard Living Space Lighting
- Outdoor Stair Lights
- Patios
- LED Deck Lighting
- Recessed Patio Lighting
- Stairways
- LED Step Lights
Specifications
| Brand | Super Bright LEDs |
|---|---|
| Input Connection Type | Pigtail |
| IP Rating | IP67 |
| Wire Length | 9in(22.8cm) |
Swipe left to see additional specifications
| Part NO | CCT Value |
|---|---|
| SLRE-NW2-120V | 3700K |
| SLRE-NW2-12V | 3700K |
| SLRE-WW2-120V | 2600K |
| SLRE-WW2-12V | 2600K |
Safety Standards
| ETL Certified | |||||||||||||||
UL Compliance |
CSA Standards | ||||||||||||||
| Conforms to | Certified to | ||||||||||||||
| UL Standard 1598 | C22. 2 No. 250 | ||||||||||||||
| UL Standard 8750 | C22. 2 No. 250.13 | ||||||||||||||
Accessories & Power Supplies
Accessories Links
Accessory Category-
$0.29 per Foot18 Gauge Wire - Two Conductor Power Wire - 18 AWG Power Wire Part Number: WP18-2In stockPower Wire for low voltage installations. Parallel bonded two conductor 18 gauge 1x16 stranded wire. Price per foot. -
$21.99 ea.LED Switching Power Supply - DiodeDrive® Series - 60-100W Enclosed Power Supply - 12V Part Number: CVPS-xWP-12VIn stockThis LED switching power supply has been designed for constant voltage operation. Reliable and widely applicable, it powers LED technology without energy waste or risk of circuit overload. Fully enclosed in a waterproof case.
-
$0.09 ea.22-16 AWG Grey 3M Twist-On Wire Connector Part Number: WN-2216In stockUse these 3M 22-16 AWG grey wire connector for closed-end connections and secure splices. The UL-Listed twist-on wire connectors tighten with out ratcheting and feature a deep skirt to prevent bare wire from being exposed. -
$0.29 ea.28-12 GA Lever-Lock Quick Connect Terminal Blocks Part Number: LQC-xIn stockLever-Lock Quick Connect Terminal Block for 28 to 12 Gauge wire. Alternative solution for traditional wire nuts to create quicker and more secure wire connections. Insert stripped wires and close the lever to secure wire and create a common connection between the other terminals, no tools required. Available with 2, 3 or 5 conductor terminals.
-
$12.99 ea.Mean Well LED Switching Power Supply - LPV Series 20-100W Single Output LED Power Supply - 12V DC Part Number: LPV-x-12In stockThe DC LPV Series 20-100W Mean Well LED Switching Power Supply is a reliable and economical 12V DC single-output power supply suitable for LED lighting and LED moving sign applications with short circuit, overload, and over-voltage protection. -
$9.99 ea.G-LUX 12 VAC Power Supply - Plug and Play Part Number: DA-x-12WIn stockPower your compatible G-LUX plug-and-play LED landscape lights and accessories with the 12 VAC power supply to create a complete landscape lighting system. The power supply features an IP54-rated weatherproof housing and output for a plug-and-play G-LUX connector. -
$0.45 ea.22-12 AWG Waterproof Silicone Filled Twist-On Wire Connector Part Number: WWN-2212In stockUL listed waterproof wire connectors suitable for all wire splices, especially those exposed to condensation, water, vapors or dust. 22-12 AWG Blue wire connector pre-filled with silicone to seal and protect connection from moisture. Not suitable for submersed connections. Price for each. -
$2.99 ea.Plug and Play Female Pigtail Cable Adapter - Female Power Cable Part Number: GLUX-FPTIn stockG-LUX series Pigtail Power Cable for wiring G-LUX series Lights into existing 12 Volt AC or DC landscape system. Compatible with G-LUX series plug-and-play LED landscape lights and accessories. 18 gauge, 1-foot length. It has a weatherproof IP54 rating. Use the GLUX Waterproof Wire Connector to create a waterproof connection for waterproof applications. -
$0.19 ea.Corrugated Split Loom Part Number: CSL-xIn stockCSL-x series black polyethylene corrugated split looms. Protects and conceal wires, cables, and tubings. Splits down the side to allow covering of pre-installed wiring. Corrugated split looms are available in 1/4", 3/8", 1/2", and 3/4" sizes. -
$114.99 ea.Magnitude Dimmable LED Power Supply - 60-200W - 12V DC Part Number: MxL12DC-ARIn stockMagnitude Dimmable LED Power Supplies are designed with magnetic transformer cores. The 12V driver has a metal NEMA 3R enclosure and can be used outdoors and indoors. It is equipped with auto-reset breakers— one on the input and one on the output, which protect both the load and driver. Includes 2 knock-outs to enable easy installation that complies with electrical code requirements. Efficiency of 80% and above allows the driver to operate at low temperatures. Compatible with TRIAC dimmers.
-
$0.21 ea.22-18 AWG Butt Connectors - Perma-seal Butt Connectors Part Number: PSC-2218In stockUse this butt connector to connect and seal 22-18 AWG wire. The insulated vinyl terminal protects wire connections from water, salt, and corrosion. Seal with a heat gun. -
$0.59 per FootSJT Cable - Black Jacketed 18 Gauge Three Conductor Power Wire - 18 AWG Power Wire Part Number: WP18-35JIn stockParallel bonded three conductor 18 gauge 3x18 stranded power wire for installations. This standard SJT cable is ideal for high voltage applications. Price per foot. -
View all
All Accessories22 additional compatible accessories
-
$2.99 ea.Plug and Play Female Pigtail Cable Adapter - Female Power Cable Part Number: GLUX-FPTIn stockG-LUX series Pigtail Power Cable for wiring G-LUX series Lights into existing 12 Volt AC or DC landscape system. Compatible with G-LUX series plug-and-play LED landscape lights and accessories. 18 gauge, 1-foot length. It has a weatherproof IP54 rating. Use the GLUX Waterproof Wire Connector to create a waterproof connection for waterproof applications.
-
$2.99 ea.Plug and Play Male Pigtail Cable Adapter - Male Power Cable Part Number: GLUX-MPTIn stockG-LUX series Male Pigtail Power Cable for wiring existing landscape lights into G-LUX plug-and-play landscape system. Compatible with G-LUX series plug-and-play power supplies, connectors, and hubs. 18 gauge, 1-foot length. It has a weatherproof IP54 rating. Use the GLUX Waterproof Wire Connector to create a waterproof connection for waterproof applications.
-
$0.29 per Foot18 Gauge Wire - Two Conductor Power Wire - 18 AWG Power Wire Part Number: WP18-2In stockPower Wire for low voltage installations. Parallel bonded two conductor 18 gauge 1x16 stranded wire. Price per foot.
-
$0.09 ea.22-16 AWG Grey 3M Twist-On Wire Connector Part Number: WN-2216In stockUse these 3M 22-16 AWG grey wire connector for closed-end connections and secure splices. The UL-Listed twist-on wire connectors tighten with out ratcheting and feature a deep skirt to prevent bare wire from being exposed.
-
$0.29 ea.28-12 GA Lever-Lock Quick Connect Terminal Blocks Part Number: LQC-xIn stockLever-Lock Quick Connect Terminal Block for 28 to 12 Gauge wire. Alternative solution for traditional wire nuts to create quicker and more secure wire connections. Insert stripped wires and close the lever to secure wire and create a common connection between the other terminals, no tools required. Available with 2, 3 or 5 conductor terminals.
-
$0.45 ea.22-12 AWG Waterproof Silicone Filled Twist-On Wire Connector Part Number: WWN-2212In stockUL listed waterproof wire connectors suitable for all wire splices, especially those exposed to condensation, water, vapors or dust. 22-12 AWG Blue wire connector pre-filled with silicone to seal and protect connection from moisture. Not suitable for submersed connections. Price for each.
-
$0.19 ea.Corrugated Split Loom Part Number: CSL-xIn stockCSL-x series black polyethylene corrugated split looms. Protects and conceal wires, cables, and tubings. Splits down the side to allow covering of pre-installed wiring. Corrugated split looms are available in 1/4", 3/8", 1/2", and 3/4" sizes. -
$0.21 ea.22-18 AWG Butt Connectors - Perma-seal Butt Connectors Part Number: PSC-2218In stockUse this butt connector to connect and seal 22-18 AWG wire. The insulated vinyl terminal protects wire connections from water, salt, and corrosion. Seal with a heat gun.
-
$9.95 ea.Weatherproof Dolphin Super B Connector with Sealant - 100 Pieces Part Number: DC-x-SIn stockDolphin Super B Connectors provide the industry’s most reliable connection with their unique design and tine structure. They reduce costs, will not corrode and do not require insulation stripping of most wire gauges before insertion. Weatherproof IP65 rating. Available in a 100 Pack.
-
$0.39 ea.Black Cable Ties - 10 Pack Part Number: CT-B-10In stock4, 6, and 11 inch Cable tie - .875" max dia.; 6 inch Cable tie - 1.50" max dia.; 11 inch Cable tie with - 3.062" max dia.; 16 inch Stud Mount Cable tie - 4.125" max dia. -
$0.32 ea.12-10 AWG Butt Connectors - Perma-seal Butt Connectors Part Number: PSC-1210In stockUse this butt connector to connect and seal 12-10 AWG wire. The insulated vinyl terminal protects wire connections from water, salt, and corrosion. Seal with a heat gun. -
$0.05 ea.3/8" Cable Clamp - White Nylon - Size 10 Screw - CCS-3 Part Number: CCS-3In stockThis white nylon cable clamp is perfect for securing anything from tube lights or light strips to wires or cables and can be mounted almost anywhere. The 3/8" clamp is molded in the open position for easy cable insertion and features a beveled edge to guard against wire damage. Use in temperatures ranging from 40°F to 365°F.
-
$0.59 per FootSJT Cable - Black Jacketed 18 Gauge Three Conductor Power Wire - 18 AWG Power Wire Part Number: WP18-35JIn stockParallel bonded three conductor 18 gauge 3x18 stranded power wire for installations. This standard SJT cable is ideal for high voltage applications. Price per foot.
-
$21.99 ea.LED Switching Power Supply - DiodeDrive® Series - 60-100W Enclosed Power Supply - 12V Part Number: CVPS-xWP-12VIn stockThis LED switching power supply has been designed for constant voltage operation. Reliable and widely applicable, it powers LED technology without energy waste or risk of circuit overload. Fully enclosed in a waterproof case.
-
$12.99 ea.Mean Well LED Switching Power Supply - LPV Series 20-100W Single Output LED Power Supply - 12V DC Part Number: LPV-x-12In stockThe DC LPV Series 20-100W Mean Well LED Switching Power Supply is a reliable and economical 12V DC single-output power supply suitable for LED lighting and LED moving sign applications with short circuit, overload, and over-voltage protection. -
$9.99 ea.G-LUX 12 VAC Power Supply - Plug and Play Part Number: DA-x-12WIn stockPower your compatible G-LUX plug-and-play LED landscape lights and accessories with the 12 VAC power supply to create a complete landscape lighting system. The power supply features an IP54-rated weatherproof housing and output for a plug-and-play G-LUX connector. -
$114.99 ea.Magnitude Dimmable LED Power Supply - 60-200W - 12V DC Part Number: MxL12DC-ARIn stockMagnitude Dimmable LED Power Supplies are designed with magnetic transformer cores. The 12V driver has a metal NEMA 3R enclosure and can be used outdoors and indoors. It is equipped with auto-reset breakers— one on the input and one on the output, which protect both the load and driver. Includes 2 knock-outs to enable easy installation that complies with electrical code requirements. Efficiency of 80% and above allows the driver to operate at low temperatures. Compatible with TRIAC dimmers.
-
$39.99 ea.Dimmable LED Driver - Enclosed Power Supply - 25-60W - 12 Volt DC Part Number: CVPSD-xWP-12V-JBIn stockThis enclosed dimmable LED driver/power supply is class-2 rated and has a maximum load of 25 or 60 watts. The 12-volt constant voltage driver has 2 entry points to screw terminals for easy wire access and is encased in a durable, vented aluminum enclosure. The enclosure is equipped with wiring knockouts on both ends. Compatible with TRIAC dimmers. -
$46.99 ea.LED Switching Power Supply - DiodeDrive® Series - 60W-150W Enclosed Power Supply - 12V Part Number: CVPS-xWM-12VIn stockDiodeDrive Class 2 switching power supply is designed for constant voltage operation. Fully enclosed in a waterproof case, the durable device will withstand moisture and dust for a long lifespan. Reliable and widely applicable, use it to power LED lights inside or outside without energy waste or risk of circuit overload.
-
$49.99 ea.LED Switching Power Supply - DiodeDrive® Series - 60W-240W Enclosed Power Supply - 12V Part Number: CVPS-xWH-12VIn stockClass 2 switching power supply from DiodeDrive is fully enclosed with a heavy duty case to withstand water and debris for a long lifespan. Backed by a 7 year warranty, the reliable device is designed for constant voltage operation. Use it to power a wide range of low voltage LED lighting applications, inside or outside, without energy waste or risk of circuit overload.
-
$99.99 ea.Dimmable LED Driver - Enclosed Power Supply - 120W - 12 Volt DC Part Number: KVP-12120-TDLIn stockThis enclosed dimmable LED driver/power supply has a maximum load of 120 watts. The 12-volt constant voltage driver has 2 entry points to screw terminals for easy wire access and is encased in a durable, vented aluminum enclosure. The sealed driver allows for indoor or outdoor use. The enclosure is equipped with wiring knockouts on both ends. Compatible with TRIAC dimmers. -
$129.99 ea.Dimmable LED Power Supply - DiodeDrive® Series - 200W Enclosed Power Supply - 12V Part Number: CVPSD-200WM-12V-JB-xIn stockDiodeDrive Constant Voltage 200W LED Driver can effectively power lights that require low voltage, such as strip lights and linear light bars. With a max wattage of 100 per outlet, this TRIAC dimmable device protects against short-circuit, overload, and heat build up. The durable, vented enclosure protects the inner components for indoor or outdoor use. Designed with 2 outputs and 7 total knockouts, wire access is easy. Select to include the optional power cord for simplified installation.
Reviews
5 / 5 stars
1 reviews
5 / 5 stars
1 reviews
Write Your Own Review
Review Guidelines
superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Abusive and offensive language
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs
Stay in touch & Save 10% on your next order!*