Overview

A cost-effective utility wrap with tremendous flexibility, the LSU Series is both wattage and CCT selectable, and controls ready. This durable linear fixture delivers long lasting illumination and critical energy savings in locations where lights are on 24/7, such as stairwells, parking garages and utility areas. MaxLite’s new Controls Ready (CR) fixtures allows for quick and easy in-field installation (plug and play) of controls. Simply purchase any CR fixture and the required Controls Node and you’re all set! See the accessory table for all controls options available for this fixture.

Product Details:

Steel housing and PMMA lens
0-10V dimming
Equivalent to a fixture using two 32 W 4 ft T8 tubes
Surface mount
120-277 VAC
Certified by UL
DLC 5.1 Premium
10-year standard warranty with labor allowance

Warranty Limitations: Product must be rated for application per the Product Data Sheet (PDS); operated ≤16 hrs; in ambient temperatures -4°F to 77°F. If ambient temperatures fall outside the -4°F to 77°F range, product is warrantied for 5 years according to the operating temperature range specified on the PDS. Up to $25/unit; registration required. Additional coverage may be available for purchase; contact MaxLite. Excludes EM/MS versions; component warranty applies.

The DesignLights Consortium® (DLC®) partners with energy-efficiency groups and utility companies to establish a set of standards for commercial LED light fixtures. The product is tested and must meet quality, energy-efficiency, and performance requirements to be added to the DLC's Qualified Products List. For more information, click here. To view all of our DLC® listed products, click here

This product meets higher lumen and efficacy standards than are required for a normal DLC® classification. This classification also requires submission of a driver IN-SITU temperature measurement test (ISTMT) along with information regarding integral controls.

This product has been certified by Underwriter Laboratories to their engineering and safety standards.

Applications

Educational Facilities
Stairwells and Public Corridors
Warehouses
Utility Lighting
Garages
Retail
Shops
Low Bays

Specifications

Ambient Operating Temperature	-20~+50 °C (-4~+122 °F)
Beam Angle	110°
Brand	MaxLite
CCT Value	3500K, 4000K, 5000K
Certifications/Compliance Standards and certifications comprise a vast number of companies and compliances that serve specific purposes—primarily addressing safety, environmental impact and energy efficiency, and sanitation. They are divided into categories for each product type and certification type to allow for very specific qualifications related to each product. When this system is being used as intended, it gives consumers, installers, suppliers, and anyone else that may be involved confidence that the product is safe and will work well in their application. The most common UL and ETL certifications relate to safety and installation, although they do also provide some sanitation-related certifications (using NSF standards). Another common certification body is the DLC, which specializes in certifying the performance of a light—mainly related to environmental impact and electrical efficiency. Learn more about different certification types here.	Certified by UL, DLC, DLC Premium
CRI	80+
Current Draw	192/292/400 mA @ 120 VAC, 83/126/173 mA @ 277 VAC
Dimmable	Yes
Dimming Type TRIAC Dimming: Triode for alternating current (TRIAC) dimming is used to control high-voltage dimmable power supplies such as Magnitude Dimmable Power Supplies. These dimmable power supplies work by varying the power on the AC input side of the power supply by means of a TRIAC dimmer. This change in power on the AC input side will vary the voltage on the DC output side and control the intensity of the LEDs. TRIAC dimmers are common hardware store and household dimmers, which include brand names such as Lutron and Leviton. Pulse-Width Modulation Dimming: Pulse-width modulation (PWM) dimming can be used to control dimmable power supplies such as Mean Well HLG Series and Mean Well LPF Series. This type of dimming control adjusts the output current based on the duty cycle. As the duty cycle increases, current will increase and the LEDs will be brighter. Conversely, if the duty cycle decreases, the current will decrease and the LEDs will be dimmer. Pulse-width modulation for these drivers is based on a 10V signal level with a frequency between 100Hz~3KHz. The MCBRF-4A or MLD-5A are compatible for this application. Resistive Dimming: Resistive dimming can be used to control dimmable power supplies such as Mean Well HLG Series. The resistance can be fixed or variable. If a fixed level of dimming is required, a simple resistor is all that is needed to dim the LEDs to a particular level. If a varying dimmable level is desired, a potentiometer can serve this purpose. By changing the resistance value of the potentiometer, the output current of the power supply changes, and the LED intensity changes. Controlling a single power supply will require a 100K ohm potentiometer for 100% intensity (100K ohm) to approximately 10% intensity (10K ohm) based on where the wiper is positioned. 1-10V Dimming: 1-10V dimming can be used to control dimmable power supplies such as 12V Mean Well HLG-40~240 Series or 24V Mean Well HLG-40~240 Series. This type of dimming control is an older style for compatible dimmable power supplies and is being replaced with 0-10V dimmer control. 1-10V dimming control works by varying the voltage from 1-10 VDC. A 10-volt signal on the dimming wire will allow for maximum current to flow to the LEDs for maximum intensity. A 1-volt signal on the dimming wire allows 10% of the current to flow from the power supply, which generates approximately 10% of the maximum intensity for the LEDs. 0-10V Dimming: 0-10V dimming can be used to control dimmable power supplies such as 12V Mean Well HLG-600 Series or 24V Mean Well HLG-600 Series. This type of dimming control is the most popular and newest style for compatible dimmable power supplies. 0-10V dimming control works by varying the voltage from 0-10 VDC. A 10-volt signal on the dimming wire will allow for maximum current to flow to the LEDs for maximum intensity. A 0.6-volt signal on the dimming wires allows 6% of the current to flow from the power supply dimming the LEDs to approximately 6% of full intensity. 0-10V dimmers can be found here.	0-10V
DLC Product ID	PKSR1C0L, PSW822H3
Efficacy	135 lm/W
Environmental Rating	Non-weatherproof, Suitable for Damp Locations
Equivalency	2-lamp 32W T8 Tubes
Finish	White
Input Connection Type	Pigtail
IP Rating	IP20
LED Color	Cool White, Natural White, Warm White, Selectable CCT
Length	4ft (48in)
Lens	Frosted
Lens Type	PMMA
Linkable	No
Intensity	3105 Lumens, 4725 Lumens, 6480 Lumens
Microwave Motion Sensor	Optional
Operating Voltage	120-277 VAC
Power Consumption	23 Watts, 35 Watts, 48 Watts
Power Factor	≥0.9
Product Materials	PMMA Lens, Steel Housing
Product Weight	6lb 10.4oz (3.02kg)
Rated Life (L70)	100000 Hours
Shipping Exclusions and Details Shipping exclusions apply to some products, making them ineligible for free shipping. Any order with a combined weight of over 150 pounds or containing an excluded item will be excluded from free shipping automatically. One or more exclusions may apply to the same product as well. Exclusions per item may include, but are not limited to, the following: • Any package with any two dimensions of the package over 30 inches. • Any package with a single side of the package over 42.3 inches. • Any package with a total combined length of the longest side added to 2 times the second and third longest sides over 130 inches. (L + 2H + 2W) • Any package with a weight over 50 pounds.	Excluded From Free Shipping
UL File Number	E361011
Warranty	10 Year

Print Specifications

Accessories & Power Supplies

All Accessories

Wiring

Installation Supplies

Emergency Drivers

Remotes

Motion Sensors

Surge Protectors

Accessories Links

Accessory Category

Accessory Type:

$7.99 ea.

Power Cord for Power Supplies - Power Cord for Power Supplies Part Number: _POWERCORD
In stock

Standard grounded power cord for plugging power supplies into standard 115VAC receptacle. 18 gauge, SJT type 3 conductor, 6 foot length.
$0.39 per Foot

22 Gauge Wire - Two Conductor Power Wire - 22 AWG Part Number: WP22-2
In stock

Power Wire for low voltage installations. Parallel bonded two conductor 22 gauge stranded wire. Price per foot.
$0.59 per Foot

SJT Cable - Black Jacketed 18 Gauge Three Conductor Power Wire - 18 AWG Power Wire Part Number: WP18-35J
In stock

Parallel bonded three conductor 18 gauge 3x18 stranded power wire for installations. This standard SJT cable is ideal for high voltage applications. Price per foot.
$5.99 ea.

515PV Straight Blade Plug - 515PV Part Number: 515PV
In stock

This 3-prong straight blade plug (515PV) is ideal for creating a grounded plug-in option for lights that use 18-AWG to 12-AWG wire. The 15-amp (max), 125-volt (max) plug is constructed of durable PVC, and its backwire clamps are designed to fit tightly around 3-conductor stripped wire.

$0.09 ea.

22-16 AWG Grey 3M Twist-On Wire Connector Part Number: WN-2216
In stock

Use these 3M 22-16 AWG grey wire connector for closed-end connections and secure splices. The UL-Listed twist-on wire connectors tighten with out ratcheting and feature a deep skirt to prevent bare wire from being exposed.
$0.39 ea.

Black Cable Ties - 10 Pack Part Number: CT-B-10
In stock

4, 6, and 11 inch Cable tie - .875" max dia.; 6 inch Cable tie - 1.50" max dia.; 11 inch Cable tie with - 3.062" max dia.; 16 inch Stud Mount Cable tie - 4.125" max dia.
$0.12 ea.

22-18 AWG Butt Connector - Non-Moisture Resistant 22-18 Part Number: BCN-R
In stock

Butt Connector with insulated Nylon. Available in 16-14 AWG size (Blue) and AWG size 22-18(Red). Also available moisture resistant. Price for each.

$59.99 ea.

In-Fixture Compact Emergency LED Driver and Battery Pack - 8W - 24-48 VDC Part Number: BLD-CM20N-480800
In stock

The BLD-CM20N-480800 emergency LED driver and battery pack works with LED drivers in commercial luminaires to keep them powered during emergency outages. When AC supply power is lost in the event of a power outage, the emergency driver switches on automatically to provide backup battery power directly to LED arrays at a rated output voltage of 25-48 VDC. The superior LiFePO4 battery provides backup light for a minimum of 90 minutes, with 10 times the shelf life of a traditional lead acid battery. The emergency battery and driver kit are UL924 Listed and allow for both field and factory installations on suitable LED luminaires. The compact, modular design of this kit is ideal for installation in-fixture as well to accommodate a wider variety of installation types than more traditional emergency backup drivers/batteries with out sacrificing performance.

$39.99 ea.

MaxLite IR Remote Control for c-Max Control Nodes - 4 Modes Part Number: CN-REMOTE
In stock

Use the MaxLite IR Remote Control for c-Max Control Node for easy field commissioning with c-Max basic control nodes and controls ready fixtures. It has bi-level dimming with dim-to-off capacity. 4 memory modes to easily store sensor settings. Manually override dimming mode to adjust desired dimming level.

$39.99 ea.

MaxLite Rectangular Control Node - Microwave Motion Sensor and Photocell - Plug-and-Play - Dimmable Part Number: CN-RTMST
In stock

The MaxLite Rectangular Control Node with microwave motion sensor and photocell is easy to install in the field with a pre-installed USB-C receptacle in controls-ready fixtures. The control node has 0-10V dimming and daylight harvesting. Pair with the MaxLite IP Remote Control for easy programming (sold separately).

$8.99 ea.

LED Surge Protector - 5kA Max Capacity - 120-277 VAC - QR-SPD07-10 Part Number: QR-SPD07-10
In stock

In the event of a voltage surge or electrical failure, LED Surge Protector is an added defense for indoor or outdoor LED fixtures. Take advantage of the already safe, long lifespan of LEDs with this additional accessory. It provides a nominal discharge current of 5kA, and a maximum discharge current of 10kA for 120-277V drivers.

Reviews

%

0 / 5 stars

0 reviews

Write Your Own Review

Write a Review

You're reviewing: MaxLite 4ft Utility Wrap Control Ready Series - Selectable Wattage - Selectable CCT - Up To 6,480 Lumens - 23W / 35W / 48W - 3500K / 4000K / 5000K

Select Rating

1 star 2 stars 3 stars 4 stars 5 stars

Nickname

Email Address

Summary

Review

Technical Level

Add your photo

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

Review text does not pertain to the product
Abusive and offensive language
Photos are not related to the reviewed product
Any violation of laws and/or copyrighted material
Unrelated hyperlinks/URLs

MaxLite 4ft Utility Wrap Control Ready Series - Selectable Wattage - Selectable CCT - Up To 6,480 Lumens - 23W / 35W / 48W - 3500K / 4000K / 5000K

Features

Product Photos

Dimensional Drawings