Overview

ArcMAX™ 2X2 LED Troffer lay-in panels made by MaxLite are the eye-pleasing and energy efficient replacement for fluorescent troffers in new or remodel construction. CCT and wattage selectable technology enables customers to choose the color temperature and lumen output that is best suited for their lighting application. The panel’s high-performance optic system delivers beautifully even light with excellent color rendering and low glare, while its architectural design features make it the perfect complement to office, education, health care, hospitality, and retail interiors.

Product Details:

0-10V Dimming
Surface mount, Flange mount, or use Aircraft cables
120-277 VAC
DLC 5.1 Premium
10-year standard warranty with labor allowance

Warranty Limitations: Product must be rated for application per the Product Data Sheet (PDS); operated ≤16 hrs; in ambient temperatures -4°F to 77°F. If ambient temperatures fall outside the -4°F to 77°F range, product is warrantied for 5-Years according to the operating temperature range specified on the PDS. Up to $25/unit; registration required. Additional coverage may be available for purchase; contact MaxLite. Excludes EM/MS versions; component warranty applies.

This product meets higher lumen and efficacy standards than are required for a normal DLC® classification. This classification also requires submission of a driver IN-SITU temperature measurement test (ISTMT) along with information regarding integral controls.

This product has been certified by Underwriter Laboratories to their engineering and safety standards.

Applications

New Construction
Commercial Suspended Grid Ceilings
Residential Suspended Grid Ceilings
Hospitals
Schools
Hotel Lighting
Gymnasiums

Specifications

Ambient Operating Temperature	-20~+40 °C (-4~+104 °F)
Beam Angle	120°
Brand	MaxLite
CCT Value	3500K, 4000K, 5000K
Certifications/Compliance Standards and certifications comprise a vast number of companies and compliances that serve specific purposes—primarily addressing safety, environmental impact and energy efficiency, and sanitation. They are divided into categories for each product type and certification type to allow for very specific qualifications related to each product. When this system is being used as intended, it gives consumers, installers, suppliers, and anyone else that may be involved confidence that the product is safe and will work well in their application. The most common UL and ETL certifications relate to safety and installation, although they do also provide some sanitation-related certifications (using NSF standards). Another common certification body is the DLC, which specializes in certifying the performance of a light—mainly related to environmental impact and electrical efficiency. Learn more about different certification types here.	Certified by UL, DLC Premium
CRI	80+
Current Draw	167/250/333 mA @ 120 VAC, 72/108/144 mA @ 277 VAC
Dimensions	2ft x 2ft
Dimmable	Yes
Dimming Type TRIAC Dimming: Triode for alternating current (TRIAC) dimming is used to control high-voltage dimmable power supplies such as Magnitude Dimmable Power Supplies. These dimmable power supplies work by varying the power on the AC input side of the power supply by means of a TRIAC dimmer. This change in power on the AC input side will vary the voltage on the DC output side and control the intensity of the LEDs. TRIAC dimmers are common hardware store and household dimmers, which include brand names such as Lutron and Leviton. Pulse-Width Modulation Dimming: Pulse-width modulation (PWM) dimming can be used to control dimmable power supplies such as Mean Well HLG Series and Mean Well LPF Series. This type of dimming control adjusts the output current based on the duty cycle. As the duty cycle increases, current will increase and the LEDs will be brighter. Conversely, if the duty cycle decreases, the current will decrease and the LEDs will be dimmer. Pulse-width modulation for these drivers is based on a 10V signal level with a frequency between 100Hz~3KHz. The MCBRF-4A or MLD-5A are compatible for this application. Resistive Dimming: Resistive dimming can be used to control dimmable power supplies such as Mean Well HLG Series. The resistance can be fixed or variable. If a fixed level of dimming is required, a simple resistor is all that is needed to dim the LEDs to a particular level. If a varying dimmable level is desired, a potentiometer can serve this purpose. By changing the resistance value of the potentiometer, the output current of the power supply changes, and the LED intensity changes. Controlling a single power supply will require a 100K ohm potentiometer for 100% intensity (100K ohm) to approximately 10% intensity (10K ohm) based on where the wiper is positioned. 1-10V Dimming: 1-10V dimming can be used to control dimmable power supplies such as 12V Mean Well HLG-40~240 Series or 24V Mean Well HLG-40~240 Series. This type of dimming control is an older style for compatible dimmable power supplies and is being replaced with 0-10V dimmer control. 1-10V dimming control works by varying the voltage from 1-10 VDC. A 10-volt signal on the dimming wire will allow for maximum current to flow to the LEDs for maximum intensity. A 1-volt signal on the dimming wire allows 10% of the current to flow from the power supply, which generates approximately 10% of the maximum intensity for the LEDs. 0-10V Dimming: 0-10V dimming can be used to control dimmable power supplies such as 12V Mean Well HLG-600 Series or 24V Mean Well HLG-600 Series. This type of dimming control is the most popular and newest style for compatible dimmable power supplies. 0-10V dimming control works by varying the voltage from 0-10 VDC. A 10-volt signal on the dimming wire will allow for maximum current to flow to the LEDs for maximum intensity. A 0.6-volt signal on the dimming wires allows 6% of the current to flow from the power supply dimming the LEDs to approximately 6% of full intensity. 0-10V dimmers can be found here.	0-10V
DLC Product ID	P055E8J7
Efficacy	125 lm/W
Environmental Rating	Non-weatherproof, Suitable for Damp Locations
Equivalency	3-lamp 17W T8 Tubes
Finish	White
Frame	White Aluminum
Input Connection Type	Pigtail
Integrated Surge Protection	1 kV
IP Rating	IP20
LED Color	Cool White, Natural White, Warm White, Selectable CCT
Lens	Frosted
Lens Type	Polycarbonate
Intensity	2500 Lumens, 3750 Lumens, 5000 Lumens
Operating Voltage	120-277 VAC
Power Consumption	20 Watts, 30 Watts, 40 Watts
Power Factor	≥0.9
Product Materials	Polystyrene, Steel
Rated Life (L70)	100000 Hours
UL File Number	E361010
Warranty	10 Year

Print Specifications

Accessories & Power Supplies

All Accessories

Dimmers

Wiring

Emergency Drivers

Remotes

Motion Sensors

Switches

Surge Protectors

Accessories Links

Accessory Category

Accessory Type:

$27.99 ea.

0-10 Volt DC Low Voltage Dimmer with Slide Dimmer Switch - 0-10V Dimmer Part Number: F019-W
In stock

This 0-10 volt DC low-voltage dimmer is designed for high-power LEDs, 3021/3023 BuckPuck™ LED drivers, and other compatible drivers or light engines with a 0-10V current-sinking control. Features logarithmic response and reverse polarity protection. Product comes complete with slider switch, wall trim plate, mounting screws, and wire nuts.
$44.99 ea.

0-10V LED Switch and Slide LED Dimmer - Single Pole/3-Way Part Number: DMD-LED3-105-x
In stock

Use this 0-10V LED switch and slide dimmer on LED fixtures, such as panels and high-bay lights, with 0-10V dimming capabilities. It has a paddle for on/off functionality and a small slider for dimming. Use the 3-way switch to control lights from two locations. Integrated high- and low-end trim adjustment dials allow access to the lowest and highest light levels without flickering. The dimmer is rated for six amps at 120 VAC or three amps at 277 VAC (amps = fixture wattage/voltage).
$34.99 ea.

0-10 Volt DC Low Voltage Dimmer with Rotary Dimmer Switch - 0-10V Dimmer Part Number: A019
In stock

This 0-10 volt DC low-voltage dimmer is designed for high-power LEDs, 3021/3023 BuckPuck LED drivers, and other compatible drivers or light engines with a 0-10V current-sinking control. Features logarithmic response and reverse polarity protection. Product comes complete with knob, wall trim plate, mounting screws, and wire nuts.

$0.39 per Foot

22 Gauge Wire - Two Conductor Power Wire - 22 AWG Part Number: WP22-2
In stock

Power Wire for low voltage installations. Parallel bonded two conductor 22 gauge stranded wire. Price per foot.
$0.09 ea.

22-16 AWG Grey 3M Twist-On Wire Connector Part Number: WN-2216
In stock

Use these 3M 22-16 AWG grey wire connector for closed-end connections and secure splices. The UL-Listed twist-on wire connectors tighten with out ratcheting and feature a deep skirt to prevent bare wire from being exposed.
$0.59 per Foot

SJT Cable - Black Jacketed 18 Gauge Three Conductor Power Wire - 18 AWG Power Wire Part Number: WP18-35J
In stock

Parallel bonded three conductor 18 gauge 3x18 stranded power wire for installations. This standard SJT cable is ideal for high voltage applications. Price per foot.

$82.99 ea.

Emergency Battery Backup Inverter - 8W - 100-347V Input - 170 VDC Output Part Number: EMH-08170-HY
In stock

The internal lithium-ion battery provides backup light for a minimum of 90 minutes and powers fixtures up to 72W. The UL 924 Listed certification and an included test switch/charge indicator.
$149.99 ea.

Emergency Battery Backup Inverter - 40W - 100-347V Input - 170 VDC Output Part Number: EMA40FY-170
In stock

The internal lithium-ion battery provides backup light for a minimum of 90 minutes and powers fixtures up to 300W. The UL 924 Listed certification and an included test switch/charge indicator.
$89.99 ea.

Slim Profile Emergency Backup Driver and Battery - 7W - 30-60 VDC Output - BLD-YT08D-XXX Part Number: BLD-YT08D-XXX
In stock

The BLD-YT08D-XXX emergency LED driver and battery works with LED drivers in commercial luminaires to keep them powered during emergency outages. When AC supply power is lost in the event of a power outage, the emergency driver switches on automatically to provide backup battery power directly to LED arrays at a rated output voltage of 30–60 VDC. The superior Li-ion battery provides backup light for a minimum of 90 minutes, with 10 times the shelf life of a traditional lead acid battery. The emergency battery and driver assembly are UL924 Listed and allow for both field and factory installations on suitable LED luminaires. The slim design of this kit is ideal for installation in tight spaces such as on troffers and light panels in recessed ceilings as well to accommodate a wider variety of installation types than more traditional emergency backup drivers/batteries with out sacrificing performance.

$39.99 ea.

MaxLite IR Remote Control for c-Max Control Nodes - 4 Modes Part Number: CN-REMOTE
In stock

Use the MaxLite IR Remote Control for c-Max Control Node for easy field commissioning with c-Max basic control nodes and controls ready fixtures. It has bi-level dimming with dim-to-off capacity. 4 memory modes to easily store sensor settings. Manually override dimming mode to adjust desired dimming level.

$39.99 ea.

MaxLite Rectangular Control Node - PIR Motion Sensor and Photocell - Plug-and-Play - Dimmable Part Number: CN-RTPSW
In stock

The MaxLite Rectangular Control Node with a PIR motion sensor and photocell is easy to install in the field with a pre-installed USB-C receptacle in controls-ready fixtures. The control node has a 0-10V dimming method with dim-to-off capacity and daylight harvesting via continuous adjustment mode. Pair with the MaxLite IP Remote Control for easy programming (sold separately).
$39.99 ea.

MaxLite Rectangular Control Node - Microwave Motion Sensor and Photocell - Plug-and-Play - Dimmable Part Number: CN-RTMST
In stock

The MaxLite Rectangular Control Node with microwave motion sensor and photocell is easy to install in the field with a pre-installed USB-C receptacle in controls-ready fixtures. The control node has 0-10V dimming and daylight harvesting. Pair with the MaxLite IP Remote Control for easy programming (sold separately).

$74.99 ea.

c-Max Wireless Bluetooth Wall Switch - 5 Button - Plug-and-Play - White Part Number: WNS5-W
In stock

c-Max Wireless Bluetooth Wall Switch controls features a patented plug-and-play interface that allows for easy field installation of low voltage nodes and sensors to create an affordable luminaire lighting control solution. Sensors integrated with occupancy, daylight harvesting, and other control capabilities help achieve energy code compliance.

$8.99 ea.

LED Surge Protector - 5kA Max Capacity - 120-277 VAC - QR-SPD07-10 Part Number: QR-SPD07-10
In stock

In the event of a voltage surge or electrical failure, LED Surge Protector is an added defense for indoor or outdoor LED fixtures. Take advantage of the already safe, long lifespan of LEDs with this additional accessory. It provides a nominal discharge current of 5kA, and a maximum discharge current of 10kA for 120-277V drivers.

Reviews

%

0 / 5 stars

0 reviews

Write Your Own Review

Write a Review

You're reviewing: ArcMAX™ 2X2 LED Troffer - Selectable CCT and Wattage - Up to 5,000 Lumens - 3500K / 4000K / 5000K - 20W / 30W / 40W

Select Rating

1 star 2 stars 3 stars 4 stars 5 stars

Nickname

Email Address

Summary

Review

Technical Level

Add your photo

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

Review text does not pertain to the product
Abusive and offensive language
Photos are not related to the reviewed product
Any violation of laws and/or copyrighted material
Unrelated hyperlinks/URLs

ArcMAX™ 2X2 LED Troffer - Selectable CCT and Wattage - Up to 5,000 Lumens - 3500K / 4000K / 5000K - 20W / 30W / 40W

Features

Product Photos