Name: LED Parking Lot Light - 450W High Voltage Area Light - 277-480 VAC - Optional Photocell - 65,250 Lumens - 5000K
Brand: Super Bright LEDs
SKU: PLLD4-450W-277V-5000K-MTx
Price: 474.99 USD
Availability: InStock

Overview

The high voltage LED parking lot light is designed for large open areas needing a wide Type III-M light distribution pattern. The parking lot light is constructed with a heavy-duty bronze die-cast aluminum housing and a polycarbonate lens to protect it in outdoor conditions. Reduce maintenance costs by replacing 1,500W metal halide fixtures with the low-maintenance LED parking lot light. Available with or with out a photocell- installation required. The light is ideal for parking lots, campuses, and parks.

Product Details:

Photocell requires installation
Bronze aluminum housing with a polycarbonate lens
IP65 waterproof rating
For dusk-to-dawn operation select between a 277 VAC photocell or a 488 VAC photocell
DLC 5.1 Premium
5-year warranty

This product meets higher lumen and efficacy standards than are required for a normal DLC® classification. This classification also requires submission of a driver IN-SITU temperature measurement test (ISTMT) along with information regarding integral controls.

This product has been certified by Underwriter Laboratories to their engineering and safety standards.

Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a product of equal value may be substituted or a gift card for the value of the product. Read More

Applications

High Lights
Warehouses
Parking Lots
Streets
Stadiums
Campuses
Parks
Billboards
Building Facades
Roadways
Car Dealerships
Area Lighting
Arenas
Tunnel Lighting

Specifications

Beam Angle	155° x 90°
CCT Value	5000K
Comparable Wattage	1500 Watt Metal-Halide
Current Draw	938 mA @ 480 VAC, 1.62 A @ 277 VAC
Dimmable	Yes
Dimming Type TRIAC Dimming: Triode for alternating current (TRIAC) dimming is used to control high-voltage dimmable power supplies such as Magnitude Dimmable Power Supplies. These dimmable power supplies work by varying the power on the AC input side of the power supply by means of a TRIAC dimmer. This change in power on the AC input side will vary the voltage on the DC output side and control the intensity of the LEDs. TRIAC dimmers are common hardware store and household dimmers, which include brand names such as Lutron and Leviton. Pulse-Width Modulation Dimming: Pulse-width modulation (PWM) dimming can be used to control dimmable power supplies such as Mean Well HLG Series and Mean Well LPF Series. This type of dimming control adjusts the output current based on the duty cycle. As the duty cycle increases, current will increase and the LEDs will be brighter. Conversely, if the duty cycle decreases, the current will decrease and the LEDs will be dimmer. Pulse-width modulation for these drivers is based on a 10V signal level with a frequency between 100Hz~3KHz. The MCBRF-4A or MLD-5A are compatible for this application. Resistive Dimming: Resistive dimming can be used to control dimmable power supplies such as Mean Well HLG Series. The resistance can be fixed or variable. If a fixed level of dimming is required, a simple resistor is all that is needed to dim the LEDs to a particular level. If a varying dimmable level is desired, a potentiometer can serve this purpose. By changing the resistance value of the potentiometer, the output current of the power supply changes, and the LED intensity changes. Controlling a single power supply will require a 100K ohm potentiometer for 100% intensity (100K ohm) to approximately 10% intensity (10K ohm) based on where the wiper is positioned. 1-10V Dimming: 1-10V dimming can be used to control dimmable power supplies such as 12V Mean Well HLG-40~240 Series or 24V Mean Well HLG-40~240 Series. This type of dimming control is an older style for compatible dimmable power supplies and is being replaced with 0-10V dimmer control. 1-10V dimming control works by varying the voltage from 1-10 VDC. A 10-volt signal on the dimming wire will allow for maximum current to flow to the LEDs for maximum intensity. A 1-volt signal on the dimming wire allows 10% of the current to flow from the power supply, which generates approximately 10% of the maximum intensity for the LEDs. 0-10V Dimming: 0-10V dimming can be used to control dimmable power supplies such as 12V Mean Well HLG-600 Series or 24V Mean Well HLG-600 Series. This type of dimming control is the most popular and newest style for compatible dimmable power supplies. 0-10V dimming control works by varying the voltage from 0-10 VDC. A 10-volt signal on the dimming wire will allow for maximum current to flow to the LEDs for maximum intensity. A 0.6-volt signal on the dimming wires allows 6% of the current to flow from the power supply dimming the LEDs to approximately 6% of full intensity. 0-10V dimmers can be found here.	0-10V
Efficacy	145 lm/w
Environmental Rating	Suitable for Wet Locations, Waterproof
Finish	Bronze
Input Connection Type	Pigtail
IP Rating .	IP65
Color Options	Cool 5000K
LED Lifetime	50000 Hours
Light Distribution	Type III-M
Lumen	65250 Lumen
Material	Aluminum Housing, Polycarbonate Lens
Operating Temperature	-35~+50 °C (-31~+122 °F)
Power Consumption	450 Watts
Power Factor	≥0.9
Standards And Certifications	Certified by UL, DLC Premium
UL File Number	E366643
Volts	277~480 VAC
Wire Gauge	18

Print Specifications

Part NO	Photocell Options	Mount Type	Photocell	Product Weight
PLLD4-50K450W-BLT3BR1-APM	No Photocell	Pole Mount	No Photocell	23lb 9.6oz (10.7kg)
PLLD4-50K450W-BLT3BR1-APM-JL	277 VAC	Pole Mount	277 VAC	24lb 1.4oz (10.9kg)
PLLD4-50K450W-BLT3BR1-APM-JL-480	480 VAC	Pole Mount	480 VAC	24lb 2.1oz (10.9kg)
PLLD4-50K450W-BLT3BR1-FB2	No Photocell	Yoke Bracket	No Photocell	21lb 12oz (9.9kg)
PLLD4-50K450W-BLT3BR1-FB2-JL	277 VAC	Yoke Bracket	277 VAC	22lb 3.8oz (10.1kg)
PLLD4-50K450W-BLT3BR1-FB2-JL-480	480 VAC	Yoke Bracket	480 VAC	22lb 4.5oz (10.1kg)
PLLD4-50K450W-BLT3BR1-SF	No Photocell	Slip-Fitter	No Photocell	22lb 12.8oz (10.3kg)
PLLD4-50K450W-BLT3BR1-SF-JL	277 VAC	Slip-Fitter	277 VAC	23lb 4.6oz (10.6kg)
PLLD4-50K450W-BLT3BR1-SF-JL-480	480 VAC	Slip-Fitter	480 VAC	23lb 5.3oz (10.6kg)
PLLD4-50K450W-BLT3BR1-WM	No Photocell	Trunnion Mount	No Photocell	22lb 13.6oz (10.4kg)
PLLD4-50K450W-BLT3BR1-WM-JL	277 VAC	Trunnion Mount	277 VAC	23lb 5.4oz (10.6kg)
PLLD4-50K450W-BLT3BR1-WM-JL-480	480 VAC	Trunnion Mount	480 VAC	23lb 6.1oz (10.6kg)

Accessories & Power Supplies

All Accessories

Mounting

Tenon Adapters

Wiring

Installation Supplies

Accessories Links

Accessory Category

Accessory Type:

$29.99 ea.

Knuckle Slipfitter Mount for PLLD4 Parking Lot Lights Part Number: PLLD4-SF
In stock

Install the PLLD4 Series parking lot light to a round pole using the adjustable knuckle slipfitter mount. The adjustable angle allows for custom beam direction. The die-cast aluminum construction provides durability in outdoor conditions.
$39.99 ea.

Pole Mount for PLLD4 Parking Lot Lights Part Number: PLLD4-APM
In stock

Install the PLLD4 Series parking lot lights to a round or square pole using the pole mount. The adjustable angle allows for custom beam direction. The die-cast aluminum construction provides durability in outdoor conditions.
$15.99 ea.

Trunnion Mount for PLLD4 Parking Lot Lights Part Number: PLLD4-WM
In stock

Install the PLLD4 Series parking lot lights to flat surfaces using the trunnion mount. The adjustable angle allows for custom beam direction. The steel construction provides durability in outdoor conditions.
$9.99 ea.

Yoke Mount for PLLD4 Parking Lot Lights - 240W / 300W / 450W Part Number: PLLD4-FB2
In stock

Install the PLLD4 Series area light with the adjustable yoke mount. The adjustable angle allows for custom beam direction. The steel construction provides durability in outdoor conditions.

$0.39 per Foot

22 Gauge Wire - Two Conductor Power Wire - 22 AWG Part Number: WP22-2
In stock

Power Wire for low voltage installations. Parallel bonded two conductor 22 gauge stranded wire. Price per foot.
$0.59 per Foot

SJT Cable - Black Jacketed 18 Gauge Three Conductor Power Wire - 18 AWG Power Wire Part Number: WP18-35J
In stock

Parallel bonded three conductor 18 gauge 3x18 stranded power wire for installations. This standard SJT cable is ideal for high voltage applications. Price per foot.

$0.09 ea.

22-16 AWG Grey 3M Twist-On Wire Connector Part Number: WN-2216
In stock

Use these 3M 22-16 AWG grey wire connector for closed-end connections and secure splices. The UL-Listed twist-on wire connectors tighten with out ratcheting and feature a deep skirt to prevent bare wire from being exposed.

Reviews

Write Your Own Review

Write a Review

You're reviewing: LED Parking Lot Light - 450W High Voltage Area Light - 277-480 VAC - Optional Photocell - 65,250 Lumens - 5000K

Select Product

Select Rating

1 star 2 stars 3 stars 4 stars 5 stars

Nickname

Email Address

Summary

Review

Technical Level

Add your photo

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

Review text does not pertain to the product
Abusive and offensive language
Photos are not related to the reviewed product
Any violation of laws and/or copyrighted material
Unrelated hyperlinks/URLs

LED Parking Lot Light - 450W High Voltage Area Light - 277-480 VAC - Optional Photocell - 65,250 Lumens - 5000K

Features

Product Photos