LED Light Pods - 2.5" Square LED Work Light - 880 Lumens - 2-Pack
Part Number
AUX-12W-S60-2PK
Features
- 60° flood beam pattern
- Durable polycarbonate lens
- Heavy-duty aluminum housing
- Lifetime warranty
Overview
with a compact design this square mini auxiliary light fits a wide variety of applications from off-road vehicles, utility and emergency vehicles, and many more. The 6 LEDs produce 880 raw lumens in a 60° flood beam pattern. Aluminum housing and integral heat sink keep the internal components safe from debris and heat. Includes a stainless steel adjustable stud mounting bracket included.
Product Details:
- Includes pigtail connector
- Installation hardware included
- Operating temperature: -40 to +122 °F
- Rated IP67 for wet conditions
- 12-48 VDC
Super Bright LEDs, Inc. warrants that products carrying a lifetime warranty will be free from defects in the material and workmanship for the lifetime of the product. If Super Bright LEDs verifies that the defect was not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product with the same product. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More
Info Center
News, Tips, Tutorials
Finding the Right Replacement Bulb
Whether you're searching for replacements for burned-out bulbs...
LED Automotive Bulbs
Easy and effective vehicle lighting upgrades.
How to Install a Light Bar
If you’re dying to install your new LED light bar but aren’t sure how, we can walk you through the process...
Installing a Combination Beam LED Light Bar
A step by step guide for easy installation of the Combination Beam LED Light Bar.
Similar Square LED Light Pods
| Lumen | Size | Wattage | LED Color | Price | ||
|
1600 Lumen
|
4.0 in
|
|
White
|
$39.95
ea.
|
|
|
1700 Lumen
|
3.0 in
|
|
White
|
$54.99
ea.
|
|
|
1440 Lumen
|
3.0 in
|
|
White
|
$44.99 - $89.90
ea.
|
|
|
1700 Lumen
|
3.0 in
|
|
White
|
$54.99 - $109.90
ea.
|
|
|
1440 Lumen
|
3.0 in
|
|
White
|
$46.99 - $93.90
ea.
|
|
|
900 Lumen
|
2.0 in
|
|
White
|
$39.99 - $79.90
ea.
|
|
Specifications
.Accessories & Power Supplies
Accessories Links
Accessory Category-
$19.99 ea.LED Light Wiring Harness with Switch and Relay - DT Connector - Single Channel - Wiring Harness - CH1 Part Number: WH-DTS10In stockComplete Plug and Play wire harness for LED Work Lights and Off Road Light Bars. Includes On/Off switch with LED indicator, fuse, and automotive relay with solder-less spade connections. 115 in length with 1 x 6 in DT pigtail adapter. Kits have maximum load of 18 Amps. Wiring harness is only for 12V products.
-
$19.99 ea.LED Light Wiring Harness with Switch and Relay - Dual Output, DT Connector - Wiring Harness - CH2 Part Number: WH-DTD15In stockComplete Plug and Play wire harness for LED Work Lights and Off Road Light Bars. Includes On/Off switch with LED indicator, fuse, and automotive relay with solderless spade connections. See drawing below for dimensions. Maximum load of 5.5 Amps per channel. -
$2.99 ea.12V DC 30/40A 5 PIN Universal Relay - 5 Pin Relay Part Number: R5-SPDT-1240In stock40 Amp, 12 Volt, 5 pin Relay in SPDT (Single Pole Double Throw) configuration with NO (Normally Open) and NC (Normally Closed) contacts. Plastic housing with integrated mounting tab and standard 5 pin layout that accepts female sockets, solder or spade terminals. Relays suitable for use with high power LED Off Road Bars, AUX lights, and other custom applications.
-
$29.99 ea.LED Light Wiring Harness with Relay and Weatherproof Switch - Dual Output - DT Connector - Wiring Harness Weatherproof Part Number: WWH-DTD30In stockComplete Plug and Play wire harness for LED Work Lights and Off Road Light Bars. Includes weatherproof On/Off switch with LED indicator, fuse, automotive relay with solderless spade connections, and DT pigtail adapters. Kits have maximum load of 15 Amps (7.5 Amps per each channel). Wiring harness is only for 12V products.
-
$1.99 ea.5 Pin Relay Socket - Pigtail Connection - 5 Pin Relay Socket Part Number: R5-SWIn stockPre-wired relay socket for use with 12 VDC Bosch type five terminal relays. 3 x 12in 18 AWG power wires and 2 x 12in 16 AWG load wires. Suitable for use with high power LED Off Road Bars, AUX lights, Work Lights and other custom applications.
-
$19.99 ea.Strobe Light Controller with Wireless Key Fob Remote - Dual 24W Outputs - 16 Strobe Patterns Part Number: LMC-700AIn stockTurn any 12V work or vehicle light into a strobe light with LMC series Strobe Light Controller. Convenient Key Fob RF Remote controls lights wirelessly. Power button turns lights on, while UP arrow selects constant ON, and DOWN arrow cycles through 16 unique strobe patterns. Dual output allows 2 lights of up to 24-watts each to be controlled, with flash patterns that either alternate between the lights or strobe simultaneously. Memory feature turns light on in the last mode that was being used. Use this strobe controller to give extra control and safety to emergency and first responder vehicles, work lights, and more. Sturdy plastic construction resists water ingress. -
$0.39 ea.Black Cable Ties - 10 Pack Part Number: CT-B-10In stock4, 6, and 11 inch Cable tie - .875" max dia.; 6 inch Cable tie - 1.50" max dia.; 11 inch Cable tie with - 3.062" max dia.; 16 inch Stud Mount Cable tie - 4.125" max dia. -
$7.99 ea.Weatherproof LED Rocker Switch - Off-Road Lights Switch Part Number: RS-1In stockThis single-pole, single-throw (SPST) LED rocker switch lets you quickly control the off-road lights on your truck, ATV, UTV, boat, tractor, or machine. The illuminated switch has two independently controlled red or white LED indicators: lit text when the vehicle is ON and lit legend when the switch is ON. -
$39.99 ea.SHO-ME Solid State Strobe LED Flasher - LED Flasher Part Number: 11.1005.SFIn stockUse the SHO-ME heavy-duty LED strobe flasher on any emergency vehicle. This flasher features 7 selectable strobe flash patterns and is compatible with most LED lights. 12V DC operation with a maximum load of 3 amps per channel. The water-resistant housing is fully potted for protection against vibration and shock. Includes 17-1/2" power wires. -
$159.99 ea.Universal LED Backlit Switch Panel - 8 Channel Automotive Control System - 12 - 24 VDC Part Number: USP-8CH-xIn stockReplace traditional rocker switches! All-in-one LED switch panel controls up to 8 lights or devices. Shop now! -
$34.99 ea.Universal Mounting Bracket for Off Road LED Light Bar - Mounting Bracket Part Number: MODLED10-BKIn stockAdjustable LED light bar mounting clamps are an excellent way to mount single row or dual row off road LED light bars to roll cages or other vehicle's tubular accessories. These pivoting clamps will allow to mount up to a 50” light bar to cage even if the cage does not run parallel to the light bar. A simple solution for mounting on brush guard bumpers, roof racks, and wakeboard towers as well. Requires 2 per off road led light bar. Must be purchased with Modular Strap Clamp. -
$5.99 ea.LED Work Light Extension Tab - Bracket Part Number: WL-EXTMBIn stockUse this LED Work Light Extension Tab to mount an LED work light where space is limited. Attach one end of the extension to your LED light mount and the other end to your LED light. The durable steel extension tab has a black powder coat for rust resistance. Tab measures 4” in length with 2” between mounting points. -
View all
All Accessories1 additional compatible accessories
-
$2.99 ea.12V DC 30/40A 5 PIN Universal Relay - 5 Pin Relay Part Number: R5-SPDT-1240In stock
40 Amp, 12 Volt, 5 pin Relay in SPDT (Single Pole Double Throw) configuration with NO (Normally Open) and NC (Normally Closed) contacts. Plastic housing with integrated mounting tab and standard 5 pin layout that accepts female sockets, solder or spade terminals. Relays suitable for use with high power LED Off Road Bars, AUX lights, and other custom applications.
-
$1.99 ea.5 Pin Relay Socket - Pigtail Connection - 5 Pin Relay Socket Part Number: R5-SWIn stock
Pre-wired relay socket for use with 12 VDC Bosch type five terminal relays. 3 x 12in 18 AWG power wires and 2 x 12in 16 AWG load wires. Suitable for use with high power LED Off Road Bars, AUX lights, Work Lights and other custom applications.
-
$19.99 ea.Strobe Light Controller with Wireless Key Fob Remote - Dual 24W Outputs - 16 Strobe Patterns Part Number: LMC-700AIn stockTurn any 12V work or vehicle light into a strobe light with LMC series Strobe Light Controller. Convenient Key Fob RF Remote controls lights wirelessly. Power button turns lights on, while UP arrow selects constant ON, and DOWN arrow cycles through 16 unique strobe patterns. Dual output allows 2 lights of up to 24-watts each to be controlled, with flash patterns that either alternate between the lights or strobe simultaneously. Memory feature turns light on in the last mode that was being used. Use this strobe controller to give extra control and safety to emergency and first responder vehicles, work lights, and more. Sturdy plastic construction resists water ingress.
-
$39.99 ea.SHO-ME Solid State Strobe LED Flasher - LED Flasher Part Number: 11.1005.SFIn stockUse the SHO-ME heavy-duty LED strobe flasher on any emergency vehicle. This flasher features 7 selectable strobe flash patterns and is compatible with most LED lights. 12V DC operation with a maximum load of 3 amps per channel. The water-resistant housing is fully potted for protection against vibration and shock. Includes 17-1/2" power wires.
-
$34.99 ea.Universal Mounting Bracket for Off Road LED Light Bar - Mounting Bracket Part Number: MODLED10-BKIn stockAdjustable LED light bar mounting clamps are an excellent way to mount single row or dual row off road LED light bars to roll cages or other vehicle's tubular accessories. These pivoting clamps will allow to mount up to a 50” light bar to cage even if the cage does not run parallel to the light bar. A simple solution for mounting on brush guard bumpers, roof racks, and wakeboard towers as well. Requires 2 per off road led light bar. Must be purchased with Modular Strap Clamp.
-
$5.99 ea.LED Work Light Extension Tab - Bracket Part Number: WL-EXTMBIn stockUse this LED Work Light Extension Tab to mount an LED work light where space is limited. Attach one end of the extension to your LED light mount and the other end to your LED light. The durable steel extension tab has a black powder coat for rust resistance. Tab measures 4” in length with 2” between mounting points.
-
$5.95 ea.
Work Light Round Magnet Base - Magnet Base Part Number: WL-MBIn stock3" Round Magnet Base encased in steel cup with 0.33" center mounting hole. Includes foam pad to prevent scratches and nut and bolt for attaching LED Work Light or LED Off Road Light Bar. For use on steel surfaces such as vehicles, refrigerators, machinery, filing cabinets, beams, and doors. -
$34.99 ea.Modular Roll Cage Strap Clamp Part Number: MODCLx-BKIn stockAdjustable LED light bar mount is an excellent way to mount single or dual row off road LED light bars and work lights to roll cages or other vehicle's tubular accessories. These pivoting mounts will allow mounting up to a 50” light bar to roll cage even if the cage does not run parallel to the light bar. A simple solution for mounting on brush guard bumpers, roof racks, and wakeboard towers as well. Requires 2 per off road led light bar. Must be purchased with Universal Mounting Bracket.
-
$19.99 ea.LED Light Wiring Harness with Switch and Relay - DT Connector - Single Channel - Wiring Harness - CH1 Part Number: WH-DTS10In stockComplete Plug and Play wire harness for LED Work Lights and Off Road Light Bars. Includes On/Off switch with LED indicator, fuse, and automotive relay with solder-less spade connections. 115 in length with 1 x 6 in DT pigtail adapter. Kits have maximum load of 18 Amps. Wiring harness is only for 12V products.
-
$19.99 ea.LED Light Wiring Harness with Switch and Relay - Dual Output, DT Connector - Wiring Harness - CH2 Part Number: WH-DTD15In stockComplete Plug and Play wire harness for LED Work Lights and Off Road Light Bars. Includes On/Off switch with LED indicator, fuse, and automotive relay with solderless spade connections. See drawing below for dimensions. Maximum load of 5.5 Amps per channel.
-
$29.99 ea.LED Light Wiring Harness with Relay and Weatherproof Switch - Dual Output - DT Connector - Wiring Harness Weatherproof Part Number: WWH-DTD30In stock
Complete Plug and Play wire harness for LED Work Lights and Off Road Light Bars. Includes weatherproof On/Off switch with LED indicator, fuse, automotive relay with solderless spade connections, and DT pigtail adapters. Kits have maximum load of 15 Amps (7.5 Amps per each channel). Wiring harness is only for 12V products.
-
$59.99 ea.LED Light Wiring Harness with Switch and Relay - Dual Output - ATP Connector - Wiring Harness - CH2 Part Number: WH-ATPD20In stockComplete Plug and Play wire harness for LED Work Lights and Off Road Light Bars with ATP connectors. Includes On/Off switch with LED indicator, fuse, automotive relay with solderless spade connections, and an ATP pigtail adapter. Kits have maximum load of 20 Amps (10 Amps per each channel). Wiring harness is only for 12V products.
-
$32.99 ea.LED Light Wiring Harness with Weatherproof Switch and Relay - Single Channel, ATP Connector - Wiring Harness - CH1 Part Number: WWHP-ATPS20In stockComplete Plug and Play wire harness for LED Work Lights and Off Road Light Bars. Includes On/Off switch with LED indicator, fuse, automotive relay with solderless spade connections, and an ATP pigtail adapter. Kits have maximum load of 15 Amps. Wiring harness is only for 12V products.
-
$0.39 ea.Black Cable Ties - 10 Pack Part Number: CT-B-10In stock4, 6, and 11 inch Cable tie - .875" max dia.; 6 inch Cable tie - 1.50" max dia.; 11 inch Cable tie with - 3.062" max dia.; 16 inch Stud Mount Cable tie - 4.125" max dia.
-
$7.99 ea.Weatherproof LED Rocker Switch - Off-Road Lights Switch Part Number: RS-1In stockThis single-pole, single-throw (SPST) LED rocker switch lets you quickly control the off-road lights on your truck, ATV, UTV, boat, tractor, or machine. The illuminated switch has two independently controlled red or white LED indicators: lit text when the vehicle is ON and lit legend when the switch is ON. -
$159.99 ea.Universal LED Backlit Switch Panel - 8 Channel Automotive Control System - 12 - 24 VDC Part Number: USP-8CH-xIn stockReplace traditional rocker switches! All-in-one LED switch panel controls up to 8 lights or devices. Shop now!
Reviews
5 / 5 stars
7 reviews
5 / 5 stars
7 reviews
Write Your Own Review
Review Guidelines
superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Abusive and offensive language
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs
Stay in touch & Save 10% on your next order!*