LED Emergency Battery Backup Lighting Kit - 6W - 760 lumens

LED Emergency Battery Backup Lighting Kit - 6W - 760 lumens

Part Number
BLD-EMK-YYY

Features

  • All-in-one battery backup lighting kit
  • Suitable for install in a large array of lighting fixtures including T5 and T8
  • Drives dedicated 6W LED module at 760 lumens for a minimum of 90 minutes
  • UL Certified for field and factory installation
  • Li-ion Battery
  • 5 Year Warranty
View more details
In Stock
$69.99 ea.

Black Friday Sale: 15% Off Your Entire Purchase! When you use code BFCM22 at checkout. Details⇒

Overview

The BLD-EMK-YYY LED Emergency Battery Backup Lighting Kit provides safe and continuous lighting during emergency outages. When the AC supply power is lost in the event of a power outage, the driver switches to emergency mode to provide backup battery power directly to the included LED array for suitable light output. The Li-ion battery provides backup light for a minimum of 90 minutes. This all-in-one kit is UL Listed and allows for both field and factory installations. Can be used for a wide variety of installation types but is most commonly installed in retrofitted fluorescent troffers or fixtures with out an emergency ballast.
Product Details:
  • Includes constant wattage emergency driver, battery, LED module and charging indicator light
  • Provides emergency lighting for 90 minutes minimum
  • Input Voltage 100-277 VAC
  • LED Module: 3.5" x 0.8"
  • LED Module: 6W, 760lm, 5000K
  • Rated IP20, suitable for dry and damp locations
  • Weight 10.1 oz
UL Listed
UL Listed
5 Years
5 Years
Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Listed label means that product samples have been tested by UL and that the product meets their Standards for Safety requirements.
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a product of equal value may be substituted or a gift card for the value of the product. Read More

Applications

  • Emergency Lighting
  • Linear High Bays
  • Linear Strip Fixtures
  • New & Existing Fixtures
  • T8 & T5 Fluorescent Fixtures
  • Troffer Fixtures
  • Vapor Tight Fixtures

Specifications

Brand DiodeDrive
Battery Type Li-ion
Component Type controller (pairs with DS-RT09)
Environmental Rating Non-weatherproof, Suitable for Damp Locations
Input Connection Type Pigtail
IP Rating IP20
Lumen 760 Lumen
Material Steel Housing
Operating Temperature 0~+50 °C (32~+122 °F)
Output Voltage 6–8.4 VDC
Standards And Certifications UL Listed
UL File Number E493915
Print Specifications

Accessories & Power Supplies

  1. 24-18 AWG Wire Splice Connectors - Single/Dual Channel Terminal Splice Taps

    $0.69 ea.
    24-18 AWG Wire Splice Connectors - Single/Dual Channel Terminal Splice Taps Part Number: SDx-24x
    In stock
    Use these single- or dual-channel wire connectors to easily splice wires with out stripping insulation. The non-weatherproof, insulated wire splice connectors are designed for 24-18 gauge wire and have a secure snap closure to hold wires in place. Use multiple combinations of single- and dual-channel connectors to reach your installation needs. Great for adding wires to an existing installation or starting a new one. Rated for 10 Amps at 300V AC/DC.

    Note: Use pliers to close connector after wires are inserted.

    Some 18-gauge wire has extra insulation; for best results, strip back the wire before inserting it into the wire splice connector.
  1. 24-18 AWG Wire Splice Connectors - Single/Dual Channel Terminal Splice Taps

    $0.69 ea.
    24-18 AWG Wire Splice Connectors - Single/Dual Channel Terminal Splice Taps Part Number: SDx-24x
    In stock
    Use these single- or dual-channel wire connectors to easily splice wires with out stripping insulation. The non-weatherproof, insulated wire splice connectors are designed for 24-18 gauge wire and have a secure snap closure to hold wires in place. Use multiple combinations of single- and dual-channel connectors to reach your installation needs. Great for adding wires to an existing installation or starting a new one. Rated for 10 Amps at 300V AC/DC.

    Note: Use pliers to close connector after wires are inserted.

    Some 18-gauge wire has extra insulation; for best results, strip back the wire before inserting it into the wire splice connector.

Reviews

Write Your Own Review

Write a Review

You're reviewing: LED Emergency Battery Backup Lighting Kit - 6W - 760 lumens

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

  • Review text does not pertain to the product
  • Abusive and offensive language
  • Photos are not related to the reviewed product
  • Any violation of laws and/or copyrighted material
  • Unrelated hyperlinks/URLs