18W T8 Hybrid Shatter-Proof 4ft Glass LED Tube - Type A/B - Up to 2,340 Lumens - 25-Pack
Part Number:
GLS-4FT18W50KAB-25PK
Manufacturer Part Number:
$189.99
per Pack
Was
In Stock
Features
- Selectable CCT: 3500K, 4000K, 5000K
- Hybrid Technology for Type A plug-and-play or Type B ballast bypass operation
- Equivalent to 4ft 32W T8 fluorescent tube
- Only Sold in 25-Packs
Related Products
Overview
The 18W T8 Hybrid Shatter-Proof 4ft Glass LED Tube is compatible with Type A plug-and-play or Type B ballast-bypass operation. One LED tube replaces a 32W T8 tube. Select the desired CCT from 3500K, 4000K, and 5000K using the switch at the end of the tube light. Each tube light has a shatter-proof frosted glass lens and delivers up to 2,340 lumens. For Type A plug-and-play installation, no ballast bypass is necessary. For Type B installation, the ballast must be removed to prevent future ballast failure.
Product Details:
- Frosted shatterproof glass construction
- G13 Bi-Pin base
- 120-277 VAC
- ETL Listed
- DLC 5.1 Standard
- 5-year warranty
Ledsion – GLS-4FT18W50KAB – Type A/B Glass T8 LED Tube Cut Sheet 
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Super Bright LEDs administers all warranty claims in-house. Read More
A product that bears an ETL-Certified label has been evaluated by a Nationally Recognized Testing Laboratory (NRTL) and meets national product safety standards. An ETL certification is accepted in the U.S. and in Canada.
The DesignLights Consortium® (DLC®) partners with energy-efficiency groups and utility companies to establish a set of standards for commercial LED light fixtures. The product is tested and must meet quality, energy-efficiency, and performance requirements to be added to the DLC's Qualified Products List. For more information, click here. To view all of our DLC® listed products, click here
Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.
Specifications
| Ambient Operating Temperature | -20 to 45 °C (-4 to 113 °F) |
|---|---|
| Ballast Compatibility | Type A (Ballast Compatible), Type B (Ballast Bypass), Type A/B (Ballast Bypass/Ballast Compatible) |
| Base Type | G13 (Bi-Pin) |
| Beam Angle | 210° |
| Brand | LEDSION |
| Bulb Type | T8 |
|
CCT
CCT
 |
3500K, 4000K, 5000K, Selectable CCT |
|
Certifications/Compliance
Certifications/Compliance
Standards and certifications comprise a vast number of companies and compliances that serve specific purposes—primarily addressing safety, environmental impact and energy efficiency, and sanitation. They are divided into categories for each product type and certification type to allow for very specific qualifications related to each product. When this system is being used as intended, it gives consumers, installers, suppliers, and anyone else that may be involved confidence that the product is safe and will work well in their application. The most common UL and ETL certifications relate to safety and installation, although they do also provide some sanitation-related certifications (using NSF standards). Another common certification body is the DLC, which specializes in certifying the performance of a light—mainly related to environmental impact and electrical efficiency. Learn more about different certification types here . |
DLC, ETL Listed, FCC |
|
CRI
CRI
 |
80+ |
|
Current Draw
Current Draw
Current draw is calculated using the following formula: W/V = A, where W = the amount of power your light needs (wattage), V is the electrical system voltage (e.g., 120V AC), and A = amps. An ampere or amp (A) is the standard unit for electrical current. A milliamp (mA) equals one-thousandth of an amp, or 1000 mA is equivalent to 1 A.
Choosing LED fixtures with the correct amperage ensures safe and proper operation, preventing damage or injury. We recommend having all electrical components and fixtures installed by a certified professional electrician or lighting technician in compliance with all relevant standards and regulations. |
150 mA @ 120 VAC, 64 mA @ 277 VAC |
| Efficacy | 130 lm/W |
|
Environmental Rating
Environmental Rating
 |
Non-weatherproof, Suitable for Damp Locations |
| Equivalency | 1-lamp 32W T8 Tube |
| Input Connection Type | G13 Bi-Pin |
| LED Color | Warm White, Natural White, Cool White, Selectable CCT |
| Rated Life (L70) | 50000 Hours |
| LED Tube Wiring | Single Ended, Dual Ended |
| Length | 48 in. (4 ft) |
| Lens Color | Frosted |
| Lens Type | Glass |
| Lumens | 2340 Lumens |
| Operating Voltage | 120-277 VAC |
| Power Factor | ≥0.9 |
| Product Materials | Glass Lens |
| Warranty | 5 Year |
| Wattage | 18 Watts (Type B), 20 Watts (Type A) |
Reviews
Customer Submitted Photos
Write Your Own Review
Review Guidelines
Super Bright LEDs reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs
