120W Selectable CCT Full Cutoff LED Wall Pack - Bypassable Photocell - 400W MH Equivalent - 14,400 Lumens - 3000K / 4000K / 5000K
Part Number:
WPFCCT-SW3B120-ST3-BRP
Manufacturer Part Number:
$139.99
ea.
Was
In Stock
Features
- Full cutoff design allows zero uplight
- Field-selectable CCT (3000K, 4000K, 5000K) for commercial and industrial applications
- Bypassable photocell for automatic dusk-to-dawn operation
- Replaces up to a 400W metal-halide
- DLC 5.1 Premium
- Available in 4 wattage options: 40W, 80W, 120W, 150W
Overview
The 120-watt selectable CCT LED wall pack is an architectural luminaire with a full cutoff design that maximizes light distribution and application spacing while eliminating uplight. The internal slide switch allows users to select color temperature during installation to match client preferences or existing lighting. The integrated photocell allows for automatic dusk-to-dawn operation and can be bypassed for continuous operation. It maintains a similar footprint to traditional MH or HID wall packs for easy replacement. Construction is durable yet lightweight, with a trapezoid-shaped powder-coated housing and sealed polycarbonate lens.
Product Details:
- Bronze powder-coated aluminum housing, polycarbonate lens
- IP65 waterproof rated
- 110° x 95° beam (Type III light distribution)
- Integrated heat sinks for thermal management
- CCT slide switch located inside fixture
- Hinged enclosure for mounting access
- Conduit entry points allow direct wall or junction box mounting
- 0-10V dimmable
- Integrated surge protection: 4kV
- Photocell operation: Light will turn on when the ambient light level falls below 30 lx and will turn off when the ambient light level exceeds 130 lx.
- 120-277 VAC
- Certified by UL
- DLC 5.1 Premium
- 5-year warranty
Documents
WPFCCT-SW3B120-ST3-BRP IES File 
WPFCCT-SW3B120-ST3-BRP Photometric Data Sheet Applications:
- Building Exteriors and Facades
- Commercial Buildings
- Industrial Facilities
- Perimeters
- Residential Complexes
- Security Lighting
- Warehouses
This product meets higher lumen and efficacy standards than are required for a normal DLC® classification. This classification also requires submission of a driver IN-SITU temperature measurement test (ISTMT) along with information regarding integral controls.
This product has been certified by Underwriter Laboratories to their engineering and safety standards.
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Super Bright LEDs administers all warranty claims in-house. Read More
Need help?
Use our Lighting Layout Tool to see how this product illuminates your space.
Specifications
| Ambient Operating Temperature | -40~+50 °C (-40~+122 °F) |
|---|---|
| Beam Angle | 110° x 95° |
| Brand | Super Bright LEDs |
| BUG Rating | B2-U0-G1 |
|
CCT
CCT
|
3000K, 4000K, 5000K, Selectable CCT |
|
Certifications/Compliance
Certifications/Compliance
Standards and certifications comprise a vast number of companies and compliances that serve specific purposes—primarily addressing safety, environmental impact and energy efficiency, and sanitation. They are divided into categories for each product type and certification type to allow for very specific qualifications related to each product. When this system is being used as intended, it gives consumers, installers, suppliers, and anyone else that may be involved confidence that the product is safe and will work well in their application. The most common UL and ETL certifications relate to safety and installation, although they do also provide some sanitation-related certifications (using NSF standards). Another common certification body is the DLC, which specializes in certifying the performance of a light—mainly related to environmental impact and electrical efficiency. Learn more about different certification types here . |
Certified by UL, DLC Premium |
|
Current Draw
Current Draw
Current draw is calculated using the following formula: W/V = A, where W = the amount of power your light needs (wattage), V is the electrical system voltage (e.g., 120V AC), and A = amps. An ampere or amp (A) is the standard unit for electrical current. A milliamp (mA) equals one-thousandth of an amp, or 1000 mA is equivalent to 1 A.
Choosing LED fixtures with the correct amperage ensures safe and proper operation, preventing damage or injury. We recommend having all electrical components and fixtures installed by a certified professional electrician or lighting technician in compliance with all relevant standards and regulations. |
1 A @ 120 VAC, 430 mA @ 277 VAC |
| Dimmable | Yes |
|
Dimmer Type
Dimmer Type
|
0-10V |
| Efficacy | 120 lm/W |
|
Environmental Rating
Environmental Rating
|
Suitable for Wet Locations, Waterproof |
| Equivalency | 400 Watt Metal Halide |
| Finish | Bronze |
| Integrated Surge Protection | 6 kV |
|
IP Rating
IP Rating
|
IP65 |
| LED Color | Warm White, Natural White, Cool White, Selectable CCT |
| Rated Life (L70) | 50000 Hours |
| Lens Type | Polycarbonate |
| Lumens | 14400 Lumens |
| Mount Type | Junction Box, Surface Mount |
| Operating Voltage | 120-277 VAC |
|
Photocell
Photocell
What is a Photocell and How Does It Work?When an LED light is equipped with a photocell, the light will turn on and off automatically based on the available ambient light. Their unique functionality makes them ideal for outdoor area lighting specifically.Photocells are variable resistors that change the resistance in an electrical circuit depending on the amount of light present where they are mounted. Because of this, they must be mounted in exposed areas where they receive adequate light to function. Photocells, or photocontrols, come in a variety of shapes and sizes and can be integrated into a luminaire or be an added accessory depending on the light. Can a Photocell Be Bypassed?Some lights allow for a photocell to be bypassed as needed. When the photocell is bypassed, it allows for the luminaire to remain on constantly or be controlled by an existing switch or timer. Depending on the type of photocell and how it is installed in the fixture, it may be bypassable using a shorting cap, a slide or DIP switch, or by unplugging the photocell. Consult the user’s manual of the light to confirm which option(s) may be applicable and how to implement them safely. Always use caution and turn off supply power before working on wiring of any type.Shorting CapPhotocells on many commercial applications like parking lot and area lighting applications are mounted externally with a twist-lock socket or adapter. Swapping this for a shorting cap simply closes the circuit on your LED light fixture, which keeps your light in an always-on state. This allows it to be controlled externally as well if a central photocell or switch system is being utilized.DIP Switch or Slide SwitchWhile DIP switches and standard slide switches function differently in most cases, when integrated into the photocontrol system of a light they perform the same function. Switches like these are common on canopy and dusk-to-dawn barn lights. These types of switches allow you to toggle the photocell sensor on or off to fit your needs without any rewiring or replacing parts.Disconnect the WiringSome photocell designs, such as those commonly found in wall packs, allow the operator to simply unplug the photocell to allow the light to work in an always-on state or be controlled by an external switch. |
Integrated Photocell (Bypassable) |
| Power Factor | ≥0.9 |
| Product Materials | Aluminum Housing |
| Product Weight | 9.7 lb (4.4 kg) |
| UL File Number | E366643 |
| Warranty | 5 Year |
| Wattage | 120 Watts |
Accessories & Power Supplies
Reviews
Customer Submitted Photos
Write Your Own Review
Review Guidelines
Super Bright LEDs reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs
