Explosion Proof LED Emergency Light - Hazardous Location Lighting - Class I Division 2 - 4,000 Lumens - Wall Mount / Hanging Mount
Part Number:
THTH2120ZNHCHB0-x
Manufacturer Part Number:
Starting at
$899.99
ea.
Starting at
Was
Features
- Class I, Division 2, Groups A, B, C, and D
- Delivers 90+ minutes of emergency lighting on a 48-hour charge
- T5 Temperature Code
- NEMA 6 and IP67-Rated
- Gasketed housing for use in extreme environments
- LiFePO4 battery withstands ambient temperatures up to 113°F
- Select between a wall mount or a hanging yoke mount
Overview
The Explosion Proof LED Emergency Light is constructed for use during a power outage in Class I, Division 2 application areas. If power is lost, the fixture’s internal LiFePO4 battery provides 90+ minutes of emergency lighting on a 48-hour charge. The fixture is constructed of a non-corrosive aluminum and stainless steel housing, an impact-resistant tempered glass lens, and a sealed gasket to prevent water intrusion or the intrusion of any hazardous gasses and vapors. The explosion-proof LED light has a test button under the cap that can be pushed to easily test the fixture without unscrewing the cap. Hardwire to power using the 3/4 “ NPT conduit entry point. Surface or yoke mount the fixture using one of the two available steel mounting brackets.
Product Details:
- 90+ minutes of emergency lighting on a 48-hour charge
- Gray aluminum housing (less than 2% copper content)
- Tempered glass lens
- Steel mounting brackets included
- IP67 waterproof rating
- 3/4“ NPT conduit entry point
- Surface wall mounting brackets and hanging yoke mounting bracket
- 120-277 VAC
- UL Listed: UL924 and UL844
- 5-year warranty
THTH Specification Sheet Applications:
- Abrasive Blasting
- Chemical Plants
- Dispensing Areas
- Distilleries
- Drilling Rigs
- Food Processing Plants
- Gas And Oil Refineries
- Granaries
- Industrial Facilities
- Rail Yards
- Wastewater and Sewage Plants
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Super Bright LEDs administers all warranty claims in-house. Read More
Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Listed label means that product samples have been tested by UL and that the product meets their Standards for Safety requirements.
This product meets or exceeds Underwriters Laboratories (UL) testing standards for use in hazardous (Classified) locations.
Specifications
| Ambient Operating Temperature | 5 to 45 °C (41 to 113 °F) |
|---|---|
| Battery Type | LiFePO4 |
| Beam Angle | 115° |
|
CCT
CCT
|
5000K |
|
Certifications/Compliance
Certifications/Compliance
Standards and certifications comprise a vast number of companies and compliances that serve specific purposes—primarily addressing safety, environmental impact and energy efficiency, and sanitation. They are divided into categories for each product type and certification type to allow for very specific qualifications related to each product. When this system is being used as intended, it gives consumers, installers, suppliers, and anyone else that may be involved confidence that the product is safe and will work well in their application. The most common UL and ETL certifications relate to safety and installation, although they do also provide some sanitation-related certifications (using NSF standards). Another common certification body is the DLC, which specializes in certifying the performance of a light—mainly related to environmental impact and electrical efficiency. Learn more about different certification types here . |
UL Listed |
|
CRI
CRI
|
70+ |
|
Current Draw
Current Draw
Current draw is calculated using the following formula: W/V = A, where W = the amount of power your light needs (wattage), V is the electrical system voltage (e.g., 120V AC), and A = amps. An ampere or amp (A) is the standard unit for electrical current. A milliamp (mA) equals one-thousandth of an amp, or 1000 mA is equivalent to 1 A.
Choosing LED fixtures with the correct amperage ensures safe and proper operation, preventing damage or injury. We recommend having all electrical components and fixtures installed by a certified professional electrician or lighting technician in compliance with all relevant standards and regulations. |
90 mA |
| Dimmable | No |
| Emergency Operation Time | 90+ Minutes |
|
Environmental Rating
Environmental Rating
|
Suitable for Wet Locations, Waterproof |
| Finish | Gray |
|
Hazardous Location Rating
Hazardous Location Rating
|
Class I, Division 2, Groups A, B, C, D |
| Input Connection Type | Pigtail |
| Integrated Surge Protection | 3 kV |
|
IP Rating
IP Rating
|
IP67 |
| LED Color | Cool White |
| Rated Life (L70) | 60000 Hours |
| Lens Color | Clear |
| Lens Type | Glass |
| Lumens | 4000 Lumens |
| Operating Voltage | 120-277 VAC |
| Power Factor | ≥0.5 |
| Product Materials | Aluminum Housing, Glass Lens |
|
T-Class Rating
T-Class Rating
|
T5 |
| UL File Number | E502848, E502849 |
| Warranty | 5 Year |
| Wattage | 20 Watts |
| Wire Gauge | 18 AWG |
| Part NO | Mount Type | Product Weight |
|---|---|---|
| THTH2120ZNHCHB0-H | Yoke Bracket | 22.1 lb (10.0 kg) |
| THTH2120ZNHCHB0-W | Surface Mount | 19.7 lb (8.9 kg) |
Reviews
Customer Submitted Photos
Write Your Own Review
Review Guidelines
Super Bright LEDs reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs
