Dream-Color Chasing RGB Controller with Wireless RF Remote - Dynamic Color-Changing Modes - Multiple Dream-Color Controller
Part Number
RGB-MDC83
Overview
Controller designed to be used with RGB Flexible Light Strips. Controls the sequence mode, chase length, and speed of 76 different mode patterns from the RF Remote Controller or directly on the RGB Controller unit. Pause any chase pattern to achieve a single color or multi-color non-chase effect. Includes RF Remote and 1 x 23A battery. Power supply not included. Match Power Supply with the power rating of the RGB Flexible Light Strip (5VDC to 24VDC).
Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More
Specifications
| Battery Type | 1 x 23A |
|---|---|
| Control Type | Handheld (RF) Remote |
| Input Connection Type | Pigtail |
| Operating Temperature | -20~+60 °C (-4~+140 °F) |
| Standards And Certifications | CE, FCC |
| Voltage | 5-24 VDC |
Documents
Accessories & Power Supplies
Accessories Links
Accessory Category-
$29.99 ea.Armacost Lighting Universal Dimmable 12V DC LED Power Supply - 120V AC Input - 20W / 24W / 45W / 60W / 120W Part Number: ARM-12V-DIn stockArmacost Lighting's 12 Volt Universal Dimming LED Power Supply provides steady low voltage power to LED lighting installations. The energy-efficient LED driver is designed using professional, high-performance components that provide stable 0 or 100% dimming free of any “pop-on” or “drop-off”. For the best results use Armacost Lighting LED lights, switches and dimming light controls. Plug-in or hardwire with detachable AC power cord. Suitable for both dry and damp locations. -
$13.99 ea.Armacost Lighting Standard 12V DC LED Power Supply - 120V AC Input - 12W / 24W / 36W / 60W Part Number: ARM-12V-SIn stockArmacost Lighting’s 12 Volt Standard LED Power Supply delivers energy-efficient, low voltage power to any LED lighting installation. The constant voltage LED driver is designed using high-performance, professional grade electronics that provide stable low voltage power output. No minimum load required. Plug-in or hardwire with detachable AC power cord. Not compatible with 120V AC dimmers. For best results use Armacost Lighting LED products -
$0.35 ea.3M-FTP Double-Sided Foam Pad - Double-Sided Foam Pad Part Number: 3M-FTPIn stockHigh performance 3M Closed-Cell Acrylic Foam Tape Pads - adhesive on both sides for attaching light bars and other LED products to a wide variety of surfaces. Measures 1.25 x 0.625in, 0.088in thick. -
$19.99 ea.DiodeDrive® Desktop AC Power Adapter - 12 VDC Switching Power Supply - 60W-120W Part Number: CPS-12V-x0WIn stockCPS series Power Adaptor from DiodeDrive provides power for 12 VDC systems, in either 60 or 120-watts. The reliable Class II device has a fully enclosed plastic case and protection against short circuit and overload. 2-pin 120 VAC input. 5.5-mm barrel connector for easy powering. -
$0.29 ea.28-12 GA Lever-Lock Quick Connect Terminal Blocks Part Number: LQC-xIn stockLever-Lock Quick Connect Terminal Block for 28 to 12 Gauge wire. Alternative solution for traditional wire nuts to create quicker and more secure wire connections. Insert stripped wires and close the lever to secure wire and create a common connection between the other terminals, no tools required. Available with 2, 3 or 5 conductor terminals.
-
$7.99 ea.DiodeDrive® Wall-Mounted AC Adapter - 12 VDC Power Supply - Black / White - 12W / 18W / 24W / 36W / 48W Part Number: CPS-12V-xWIn stockPower Adaptor from DiodeDrive provides power for 12 VDC systems. The Class II device has an enclosed plastic case and protection against electoral shock. 2-Prong 120 VAC input. 5.5-mm barrel connector. -
$0.21 ea.22-18 AWG Butt Connectors - Perma-seal Butt Connectors Part Number: PSC-2218In stockUse this butt connector to connect and seal 22-18 AWG wire. The insulated vinyl terminal protects wire connections from water, salt, and corrosion. Seal with a heat gun. -
$9.95 ea.Weatherproof Dolphin Super B Connector with Sealant - 100 Pieces Part Number: DC-x-SIn stockDolphin Super B Connectors provide the industry’s most reliable connection with their unique design and tine structure. They reduce costs, will not corrode and do not require insulation stripping of most wire gauges before insertion. Weatherproof IP65 rating. Available in a 100 Pack.
-
$0.75 ea.Clear 24-18 AWG "T" Tap Wire Splice Connectors - Single, Dual Channel Part Number: STxC-2418In stockEasily splice wires with out stripping insulation with single-channel or dual-channel "T" tap connectors. The non-weatherproof, insulated wire splice connectors are designed for 24-18 gauge wire and have a secure snap closure to hold wires in place. The clear design allows you to ensure that wires are connected. Use multiple combinations of single- and dual-channel connectors to reach your installation needs. Great for adding wires to an existing installation or starting a new one. Rated for 10 Amps at 300V AC/DC.
-
$13.99 ea.Wall-Mounted AC Adapter - 12 VDC Switching Power Supply 18W / 25W Part Number: GSTxU12-P1JIn stockUse the economic 12 VDC Wall-Mounted Power Supply from Mean Well to power various compatible lights and devices. This Class II AC adapter protects against short circuits, overload, and overvoltage and has a 5.5mm barrel connector output and standard 1-15P 120VAC input. Available in 18 or 25-watt maximum output.
-
$0.99 ea.LC4 Locking Connector Pigtail Power Cable Part Number: LC4x-PTIn stockLC4F-CPS series pigtail power connector for LC4 RGB Flexible Light Strips. 20 gauge parallel bonded with polarized latching connector and stripped tinned ends. 63.5cm(25in) length. -
$1.99 ea.LC4 Locking Connector Splitter Cable Part Number: LC4-MxFIn stockLC4-MxF series splitter cable for LC4 RGB Flexible Light Strips. Easily power multiple LC4 RGB flexible light strips with one Compact Power Supply. 20 gauge parallel bonded with polarized latching connector. Available in 22 in length with 2 or 4 plug and play connectors. -
View all
All Accessories14 additional compatible accessories
-
$0.35 ea.3M-FTP Double-Sided Foam Pad - Double-Sided Foam Pad Part Number: 3M-FTPIn stockHigh performance 3M Closed-Cell Acrylic Foam Tape Pads - adhesive on both sides for attaching light bars and other LED products to a wide variety of surfaces. Measures 1.25 x 0.625in, 0.088in thick.
-
$0.29 ea.28-12 GA Lever-Lock Quick Connect Terminal Blocks Part Number: LQC-xIn stockLever-Lock Quick Connect Terminal Block for 28 to 12 Gauge wire. Alternative solution for traditional wire nuts to create quicker and more secure wire connections. Insert stripped wires and close the lever to secure wire and create a common connection between the other terminals, no tools required. Available with 2, 3 or 5 conductor terminals.
-
$0.21 ea.22-18 AWG Butt Connectors - Perma-seal Butt Connectors Part Number: PSC-2218In stockUse this butt connector to connect and seal 22-18 AWG wire. The insulated vinyl terminal protects wire connections from water, salt, and corrosion. Seal with a heat gun.
-
$9.95 ea.Weatherproof Dolphin Super B Connector with Sealant - 100 Pieces Part Number: DC-x-SIn stockDolphin Super B Connectors provide the industry’s most reliable connection with their unique design and tine structure. They reduce costs, will not corrode and do not require insulation stripping of most wire gauges before insertion. Weatherproof IP65 rating. Available in a 100 Pack.
-
$0.75 ea.Clear 24-18 AWG "T" Tap Wire Splice Connectors - Single, Dual Channel Part Number: STxC-2418In stockEasily splice wires with out stripping insulation with single-channel or dual-channel "T" tap connectors. The non-weatherproof, insulated wire splice connectors are designed for 24-18 gauge wire and have a secure snap closure to hold wires in place. The clear design allows you to ensure that wires are connected. Use multiple combinations of single- and dual-channel connectors to reach your installation needs. Great for adding wires to an existing installation or starting a new one. Rated for 10 Amps at 300V AC/DC.
-
$29.99 ea.Armacost Lighting Universal Dimmable 12V DC LED Power Supply - 120V AC Input - 20W / 24W / 45W / 60W / 120W Part Number: ARM-12V-DIn stockArmacost Lighting's 12 Volt Universal Dimming LED Power Supply provides steady low voltage power to LED lighting installations. The energy-efficient LED driver is designed using professional, high-performance components that provide stable 0 or 100% dimming free of any “pop-on” or “drop-off”. For the best results use Armacost Lighting LED lights, switches and dimming light controls. Plug-in or hardwire with detachable AC power cord. Suitable for both dry and damp locations. -
$13.99 ea.Armacost Lighting Standard 12V DC LED Power Supply - 120V AC Input - 12W / 24W / 36W / 60W Part Number: ARM-12V-SIn stockArmacost Lighting’s 12 Volt Standard LED Power Supply delivers energy-efficient, low voltage power to any LED lighting installation. The constant voltage LED driver is designed using high-performance, professional grade electronics that provide stable low voltage power output. No minimum load required. Plug-in or hardwire with detachable AC power cord. Not compatible with 120V AC dimmers. For best results use Armacost Lighting LED products -
$19.99 ea.DiodeDrive® Desktop AC Power Adapter - 12 VDC Switching Power Supply - 60W-120W Part Number: CPS-12V-x0WIn stockCPS series Power Adaptor from DiodeDrive provides power for 12 VDC systems, in either 60 or 120-watts. The reliable Class II device has a fully enclosed plastic case and protection against short circuit and overload. 2-pin 120 VAC input. 5.5-mm barrel connector for easy powering. -
$7.99 ea.DiodeDrive® Wall-Mounted AC Adapter - 12 VDC Power Supply - Black / White - 12W / 18W / 24W / 36W / 48W Part Number: CPS-12V-xWIn stockPower Adaptor from DiodeDrive provides power for 12 VDC systems. The Class II device has an enclosed plastic case and protection against electoral shock. 2-Prong 120 VAC input. 5.5-mm barrel connector. -
$13.99 ea.Wall-Mounted AC Adapter - 12 VDC Switching Power Supply 18W / 25W Part Number: GSTxU12-P1JIn stockUse the economic 12 VDC Wall-Mounted Power Supply from Mean Well to power various compatible lights and devices. This Class II AC adapter protects against short circuits, overload, and overvoltage and has a 5.5mm barrel connector output and standard 1-15P 120VAC input. Available in 18 or 25-watt maximum output.
-
$0.99 ea.LC4 Locking Connector Pigtail Power Cable Part Number: LC4x-PTIn stockLC4F-CPS series pigtail power connector for LC4 RGB Flexible Light Strips. 20 gauge parallel bonded with polarized latching connector and stripped tinned ends. 63.5cm(25in) length. -
$1.99 ea.LC4 Locking Connector Splitter Cable Part Number: LC4-MxFIn stockLC4-MxF series splitter cable for LC4 RGB Flexible Light Strips. Easily power multiple LC4 RGB flexible light strips with one Compact Power Supply. 20 gauge parallel bonded with polarized latching connector. Available in 22 in length with 2 or 4 plug and play connectors. -
$1.49 ea.LC4 Locking Connector Power Cable Extension Part Number: LC4-EXTIn stockLC4-EXT series extension cable for LC4 RGB flexible light strips. Available in 39in (3.28ft - 1 meter) and 118in (9.84ft - 3 meter) lengths. -
$0.49 ea.LC4 Locking Connector Interconnect Part Number: LC4-xIn stockLC4 series interconnect jumper for connecting LC4 RGB Flexible Light Strips together. 22 gauge parallel bonded with polarized latching connector. 8.2cm (3.2in) length.
Reviews
5 / 5 stars
1 reviews
5 / 5 stars
1 reviews
Write Your Own Review
Review Guidelines
superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Abusive and offensive language
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs
Stay in touch & Save 10% on your next order!*