Inspired by the needs of a professional rally driver, the Stage Series 30-inch LED light bar is designed for maximum functionality, with compact size, custom-engineered TIR optics, and a practical beam pattern, all in a highly durable package. A narrow-profile extruded housing allows fitment in small and tight areas. At less than 42mm tall, they reduce weight and fit in many places a traditional dual-row light bar won't. The heatsink design also drastically reduces wind noise and does not whistle in the wind like many generic housings.
High-intensity Lumileds LEDs, coupled with a patent pending total internal reflection (TIR) optic, make the full intensity of the Stage Series far higher than a standard light bar using basic optics or reflectors. The TIR optic collects all of the light from the LED, directing it only where you need it, drastically reducing glare and improving total efficiency compared to traditional optics.
The Driving pattern was designed to supplement your high beams. Rather than a simple "spot" pattern, the Stage Series Driving pattern has a rectangular 20Wx8H degree pattern that is far more useful for directing light downrange at high speeds. The Combo pattern combines both the Driving and Flood optics. It shines light downrange in a focused, rectangular 20Wx8H degree pattern while illuminating the area in a full 80Wx50H degree spread.
Each lightbar is based on 6-inch segments. Each segment is sealed with an individual lens and a double-wall seal. Individual seals make them more weather-tight than a large, single seal and allow you to change the outer lens to suit your needs. With just a few screws, you can replace the outer lens with a new one to change the beam pattern or color.
Stage Series LED lights use a standard DT-type Deutsch-style connector and include a 6-inch pigtail with bare wire leads. You can wire yourself, use an off-the-shelf Deutsch wire harness, or select an optional Diode Dynamics wire harness. If you choose to use a Diode Dynamics wire harness on a 24V system, you must replace the relay on the harness with a 24V relay.