Toggle Nav
My Cart 0
Top
Shop By Category
Account
Site Tools
5050 Single-Color LED Strip Light - Custom Length Tape Light - 24V - IP20 - 385 lm/ft

Custom Length Single Color LED Strip Light - Radiant Series Tape Light - 24V - IP20

Part Number
STN-x-A6A-10B1M-24V

Features

  • 24V For longer continuous runs - Up to 49'
  • Can be cut every 4"
  • 3M™ Adhesive backing
  • Lifetime warranty
  • 0-100% Dimmable
  • See accessories for controllers, power supplies, connectors, and channels
View more details

Starting at $17.99 per Meter
In Stock
Only %1 left
Measurement in meters
Free Shipping
On all orders $300 and up only within the U.S.
Read More.

Item does not qualify

Add to Wish List

Custom length strips cannot be returned or exchanged.
 Also available in 5m and 30m reels

main product photo
10 photos

Overview

Description
This flexible Radiant Series LED light strip operates on 24 VDC and can be used in longer runs than 12V strips. It emits 385 lumens of warm white, natural white, cool white, blue, green, or red light per foot. The LED tape light can be easily cut into separate 6-LED segments and installed with its peel-and-stick 3M™ adhesive backing. Minimum length is 3.28'. Run the strip back to power every 49' to avoid excessive voltage drop. This strip light is covered by a lifetime warranty. It's great for cabinets, under-cabinet lighting, coves, bookshelves, or other indoor applications where space is limited.

Custom-length strip sections are cut from a larger reel and will not have wire leads. Soldering or the use of solderless connectors (sold separately) is required. See accessories for compatible connectors.

Applications

  • Accent Lighting
  • Backlighting
  • Bias Lighting
  • Cove Lighting
  • Display Cases
  • Off Grid Lighting
  • Retail Shops
  • Sign Lighting
  • Task Lighting
  • Trade Shows
  • TV Backlighting
  • Under-Cabinets
UL Listed
UL Listed
CE
CE
Lifetime
Lifetime
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
Super Bright LEDs, Inc. warrants that products carrying a lifetime warranty will be free from defects in the material and workmanship for the lifetime of the product. If Super Bright LEDs verifies that the defect was not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product with the same product. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More
Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Listed label means that product samples have been tested by UL and that the product meets their Standards for Safety requirements.

LED Strip Lights FAQs

What is the difference between 12V and 24V strip lights?

Most LED strips are extremely similar despite differences in voltage. They look the same and are capable of similar light output. Despite this, there are some key differences between voltages which affect use for various applications. 12-volt DC strips can be connected directly to a vehicle's 12-volt DC electrical system. Higher voltage strips (e.g. 24 VDC, 36 VDC, or 48 VDC) on the other hand allow for longer runs and higher densities of LEDs over their 12-volt counterparts. 120 VAC strips offer incredibly long max runs and the ability to power from a standard wall outlet. For the maximum run of a strip see max run in the specification table. Read More »

How long of a run can I make my strip?

The max run of an LED strip is dependent on two primary things—voltage and density.

Higher voltage strips will generally give you a longer run than comparable lower voltage strips (e.g. 24 VDC would have a longer max run than 12 VDC with the same type of strip and density). Similarly, lower density strips have the potential for longer runs than high density strips.

So essentially, max run can be lengthened by choosing a higher voltage and/or lower density version of a strip, but a higher voltage could also provide a similar max run at an increased density where brightness or 'line of light' are more of a concern. If an install needs to extend beyond a strips max run, additional power feeds can also be run back to the power supply from other points in the run.

Please refer to the max run spec listed in the specification table of each product information page for specific information about each strip. Read More »

What is color temperature? Which one is best?

Graphic showing light output color temperature range

Correlated Color Temperature is the hue, or tint of white to expect from a light source and is measured in kelvin. Lower numbers give off a warmer white that is closer to candle light, and is good for relaxed and cozy spaces. Higher numbers give off a cooler white light that will appear more blueish. While values to the middle of the spectrum give off a more neutral or natural white light that is similar to daylight. Natural and cool white are considered ideal for task lighting.

Read More About: Lumens vs CCT vs CRI »

How bright is the strip? What are lumens and how many do I need?

Lumens are the measure of how bright an LED strip will be when in use. The higher the lumen rating, the brighter the strip will be. Higher lumen strips are usually better for under cabinet and task lighting. Lower lumen strips are typically used for accent lighting applications.

Read More About: Lumens vs CCT vs CRI »

What accessories do I need?

The only thing you need for certain to power a strip light is a power supply. We offer accessories used for installation, such as connectors and aluminum mounting channels. As well as others that add functionality such as such as dimmers, switches, and remote controls. Complete kits are also offered which include everything you need to get started.

12 Volt Power Supplies

12 Volt Power Supplies
24 Volt Power Supply

24 Volt Power Supplies

Strip Connectors

Strip Connectors

Controllers

Controllers

Housings

Housings

Installation Supplies

Installation Supplies

LED Strip Light Power Supply Calculator

Calculate the minimum power supply capacity needed for your installation. Minimum wattage is calculated as estimated wattage / 0.80 to give you the 20% wattage overhead necessary to improve power supply longevity.

Outdoor?

Calculate

Minimum Power Supply Wattage:
xx watts.

Shop Indoor Power Supplies

We've pre-filtered compatible power supplies for you based on voltage and weatherproofing requirements. Double check your wattage selection based on the calculation above before adding to cart. Many of our power supplies are offered in multiple wattages.

Specifications

Ambient Operating Temperature -25~+45 °C (-13~+113 °F)
Brightness 385 lm/ft (1263 lm/m)
Certifications/Compliance CE, UL Listed
Dimmable Yes
Environmental Rating Non-weatherproof, Suitable for Dry Locations
Finish White
IP Rating IP20
LED Beam Angle 120°
LED Density 18 LEDs/ft
LED Type 5050 SMD
LEDs per Segment 6
Light Length Custom Length
Max Run (Class 2) Up to 26.2ft (8m)
Minimum Cut Length 100mm (3.9in)
Operating Voltage 24 VDC
Rated Life (L70) 50000 Hours
Series Radiant
Strip Width 10mm (0.39in)
Wire Length 1.7 ft (51.8 cm)
Print Specifications
Swipe left to see additional specifications
Part NO CCT Value Color/CCT CRI Current Draw Current Draw per Foot Efficacy Power Consumption Wattage per Foot
STN-A30K80-A6A-10B1M-24V 3000K Warm 3000K 80+ 2.3 A 139mA 115 lm/W 55 Watts 3.3 W/ft (11 W/m)
STN-A40K80-A6A-10B1M-24V 4000K Natural 4000K 80+ 2.3 A 139mA 115 lm/W 55 Watts 3.3 W/ft (11 W/m)
STN-A50K80-A6A-10B1M-24V 5000K Cool 5000K 80+ 2.3 A 139mA 115 lm/W 55 Watts 3.3 W/ft (11 W/m)
STN-A65K80-A6A-10B1M-24V 6500K Cool 6500K 80+ 2.3 A 139mA 115 lm/W 55 Watts 3.3 W/ft (11 W/m)
STN-BBLU-A6A-10B1M-24V Blue 2.3 A 139mA 115 lm/W 55 Watts 3.3 W/ft (11 W/m)
STN-BGRE-A6A-10B1M-24V Green 2.3 A 141mA 113 lm/W 56 Watts 3.4 W/ft (11 W/m)
STN-BRED-A6A-10B1M-24V Red 2.4 A 146mA 109 lm/W 58 Watts 3.5 W/ft (11.6 W/m)

All specifications are subject to change without notice. All products are RoHS compliant.

Accessories & Power Supplies

Reviews

3.7 / 5 stars
3 reviews

Write Your Own Review

Write a Review

You're reviewing: Custom Length Single Color LED Strip Light - Radiant Series Tape Light - 24V - IP20

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

  • Review text does not pertain to the product
  • Abusive and offensive language
  • Photos are not related to the reviewed product
  • Any violation of laws and/or copyrighted material
  • Unrelated hyperlinks/URLs