2835 Single-Color LED Strip Light - Custom Length Tape Light - 24V - IP20 - 310 lm/ft

Custom Length Single Color LED Strip Light - Highlight Series Tape Light - 24V - IP20 - 310 lm/ft

Part Number
HL-IP20-80CRI-CL

Features

  • 24V For longer continuous runs - Up to 32'
  • Can be cut every 4"
  • 3M™ Adhesive backing
  • Lifetime warranty
  • 0-100% Dimmable
  • See accessories for controllers, power supplies, connectors, and channels
View more details
In Stock

$15.99 per Meter
Measurement in meters

Custom length strips cannot be returned or exchanged.
 Also available in 5m and 30m reels

Overview

Highlight Series flexible LED strip light operates on 24 VDC and can be used in longer runs than 12V strips. It emits up to 310 lumens of red, green, or blue light per foot. The LED tape light can be easily cut into separate 6-LED segments and installed with its peel-and-stick 3M™ adhesive backing. Minimum custom length is 3.28'. Run the strip back to power every 32' to avoid excessive voltage drop. This LED strip is covered by a lifetime warranty. It's great for cabinets, under-cabinet lighting, coves, bookshelves, or other indoor applications where space is limited.

Custom-length strip sections are cut from a larger reel and will not have wire leads. Soldering or the use of solderless connectors (sold separately) is required. See accessories for compatible connectors.
UL Listed
UL Listed
CE
CE
Lifetime
Lifetime
Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Listed label means that product samples have been tested by UL and that the product meets their Standards for Safety requirements.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
Super Bright LEDs, Inc. warrants that products carrying a lifetime warranty will be free from defects in the material and workmanship for the lifetime of the product. If Super Bright LEDs verifies that the defect was not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product with the same product. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More

Applications

  • Task Lighting
  • Off Grid Lighting
  • Exhibitions
  • Retail Shop
  • Museum Lighting
  • Art Gallery
  • Indoor Photography Lighting
  • Studio Office Lighting
  • Energy Efficient New Construction
  • Coves
  • Bias Lighting
  • Trade Shows

Specifications

Beam Angle 120°
Current Draw 2.18A (2180mA)
Current Draw per Foot 133mA
Cuttable Segment Length 100mm (3.9in)
Dimmable Yes
Efficacy 84 lm/W
Environmental Rating Non-weatherproof, Suitable for Dry Locations
IP Rating IP20
LED Density 18 LEDs/ft
LED Lifetime 50000 Hours
LED Quantity 300 LEDs
LED Type 2835 SMD
LEDs per Segment 6
Length Custom Length
Max Run Up to 27.9ft (8.5m)
Operating Temperature -20~+45 °C (-4~+113 °F)
Power Consumption 52 Watts
Standards And Certifications CE, UL Listed
Strip Width 10mm (0.39in)
UL File Number E357850
Volts 24 VDC
Wattage per Foot 3.2 W/ft (10.4 W/m)
Wire Length 508mm (20in)
Print Specifications
Swipe left to see additional specifications
Sample breakdown of part numbers and their meanings for most of our LED strip/tape light lines.

Accessories & Power Supplies

  1. 5-in-1 LED RGB+CCT Strip Light Controller - Alexa / Google Assistant / Smartphone Compatible - Optional RF Remote - 5 Amps/Channel

    $32.99 ea.
    5-in-1 LED RGB+CCT Strip Light Controller - Alexa / Google Assistant / Smartphone Compatible - Optional RF Remote - 5 Amps/Channel Part Number: GL-C-001W-C
    In stock
    The 5-in-1 controller features five different control types: single-color dimming, CCT, RGB, RGBW, and RGB+CCT. The controller is compatible with the Tuya smartphone app or can be controlled with optional RF remote control.
  2. Wireless LED Controller for Single-Color LED Strip Lights - Zigbee Compatible - Optional Remote - 5 Amps / Channel

    $44.99 ea.
    Wireless LED Controller for Single-Color LED Strip Lights - Zigbee Compatible - Optional Remote - 5 Amps / Channel Part Number: GL-C-009P-C
    In stock
    The wireless controller has a wide input voltage range to work with single-color LED lights. Pair the controller with the Zigbee lighting ecosystem for energy savings and easy operation.
  3. MiBoxer LED Dimmer with RF Touch Remote - Single-Color Light Strip Controller - 4 Zone - 6 Amps / Channel - 12-24 VDC

    $24.95 ea.

    MiBoxer LED Dimmer with RF Touch Remote - Single-Color Light Strip Controller - 4 Zone - 6 Amps / Channel - 12-24 VDC Part Number: FUT036-R
    Out of stock

    Adjust the brightness of single-color LED strip lights using the LED dimmer. The single-color dimmer has a 30m communication range with a synchronization function that allows a single remote to operate one or multiple controllers. Control up to four individual lighting zones on one dimming controller using the included remote control. Included remote is powered by 2x AAA batteries (not included).

  4. MiBoxer LED Controller with RF Touch Remote - RGB+CCT Light Strip - 8 Zone - 6 Amps / Channel - 12-24 VDC

    $38.95 ea.

    MiBoxer LED Controller with RF Touch Remote - RGB+CCT Light Strip - 8 Zone - 6 Amps / Channel - 12-24 VDC Part Number: FUT039-R
    Out of stock

    Use the LED controller to adjust the settings of RGB+CCT LED strip lights. The controller has a 30m communication range with a synchronization function that allows a single remote to operate one or multiple controllers. Control up to eight individual lighting zones on one controller using the included remote control. The included remote control has a color wheel for customizable RGB color, a dimming slider and color temperature slider, and mode and speed control. Link the remote to the controller using a 2.4 GHz connection.

  5. View all

    All Accessories

    1 additional compatible accessories

  1. 5-in-1 LED RGB+CCT Strip Light Controller - Alexa / Google Assistant / Smartphone Compatible - Optional RF Remote - 5 Amps/Channel

    $32.99 ea.
    5-in-1 LED RGB+CCT Strip Light Controller - Alexa / Google Assistant / Smartphone Compatible - Optional RF Remote - 5 Amps/Channel Part Number: GL-C-001W-C
    In stock
    The 5-in-1 controller features five different control types: single-color dimming, CCT, RGB, RGBW, and RGB+CCT. The controller is compatible with the Tuya smartphone app or can be controlled with optional RF remote control.
  2. Wireless LED Controller for Single-Color LED Strip Lights - Zigbee Compatible - Optional Remote - 5 Amps / Channel

    $44.99 ea.
    Wireless LED Controller for Single-Color LED Strip Lights - Zigbee Compatible - Optional Remote - 5 Amps / Channel Part Number: GL-C-009P-C
    In stock
    The wireless controller has a wide input voltage range to work with single-color LED lights. Pair the controller with the Zigbee lighting ecosystem for energy savings and easy operation.
  3. MiBoxer LED Dimmer with RF Touch Remote - Single-Color Light Strip Controller - 4 Zone - 6 Amps / Channel - 12-24 VDC

    $24.95 ea.

    MiBoxer LED Dimmer with RF Touch Remote - Single-Color Light Strip Controller - 4 Zone - 6 Amps / Channel - 12-24 VDC Part Number: FUT036-R
    Out of stock

    Adjust the brightness of single-color LED strip lights using the LED dimmer. The single-color dimmer has a 30m communication range with a synchronization function that allows a single remote to operate one or multiple controllers. Control up to four individual lighting zones on one dimming controller using the included remote control. Included remote is powered by 2x AAA batteries (not included).

  4. MiBoxer LED Controller with RF Touch Remote - RGB+CCT Light Strip - 8 Zone - 6 Amps / Channel - 12-24 VDC

    $38.95 ea.

    MiBoxer LED Controller with RF Touch Remote - RGB+CCT Light Strip - 8 Zone - 6 Amps / Channel - 12-24 VDC Part Number: FUT039-R
    Out of stock

    Use the LED controller to adjust the settings of RGB+CCT LED strip lights. The controller has a 30m communication range with a synchronization function that allows a single remote to operate one or multiple controllers. Control up to eight individual lighting zones on one controller using the included remote control. The included remote control has a color wheel for customizable RGB color, a dimming slider and color temperature slider, and mode and speed control. Link the remote to the controller using a 2.4 GHz connection.

  5. View all

    Controllers

    55 additional compatible accessories

  1. DiodeDrive® Desktop AC Power Adapter - 24 VDC Switching Power Supply - 60W-120W

    $19.99 ea.
    DiodeDrive® Desktop AC Power Adapter - 24 VDC Switching Power Supply - 60W-120W Part Number: CPS-24V-x0W
    In stock
    CPS series Power Adaptor from DiodeDrive provides power for 24 VDC systems, with either 60 or 120-watts. The reliable Class II device has a fully enclosed plastic case and protection against short circuit and overload. 2-pin 120 VAC input. 5.5-mm barrel connector for easy powering.
  2. Magnitude Dimmable LED Power Supply - 50-200W - 24 Volt DC

    $114.99 ea.
    Magnitude Dimmable LED Power Supply - 60-200W - 24V DC Part Number: MxL24DC-AR
    In stock
    Magnitude Dimmable LED Power Supplies are designed with magnetic transformer cores. The 24V driver has a metal Nerma 3R enclosure and can be used outdoors and indoors. It is equipped with auto-reset breakers— one on the input and one on the output, which protect both the load and driver. Includes 2 knock-outs to enable easy installation that complies with electrical code requirements. Efficiency of 85% and above allows the driver to operate at low temperatures. Compatible with TRIAC dimmers. Class 2 rated (96W versions only).
  3. Wall-Mounted AC Adapter - 24 VDC Power Supply - 12-36W

    $7.99 ea.
    DiodeDrive® Wall-Mounted AC Adapter - 24 VDC Power Supply - 12W / 18W / 24W / 36W / 48W Part Number: CPS-24V-xW
    In stock
    Power Adaptor from DiodeDrive provides power for 24 VDC systems. The Class II device has an enclosed plastic case and protection against electoral shock. 2-prong 120 VAC input. 5.5-mm barrel connector.
  4. LED Switching Power Supply - DiodeDrive® Series - 60-100W Enclosed Power Supply - 24V

    $21.99 ea.
    LED Switching Power Supply - DiodeDrive® Series - 60-100W Enclosed Power Supply - 24V Part Number: CVPS-xWP-24V
    In stock
    This LED switching power supply has been designed for constant voltage operation. Reliable and widely applicable, it powers LED technology with out energy waste or risk of circuit overload. Fully enclosed in a waterproof case.
  5. Mean Well LED Switching Power Supply - LPV Series 20-100W Single Output LED Power Supply - 24V DC

    $12.99 ea.
    Mean Well LED Switching Power Supply - LPV Series 20-100W Single Output LED Power Supply - 24V DC Part Number: LPV-x-24
    In stock
    A low cost, economical LED power supply. Provides protections against short circuit, over load, over voltage. Low cost, high reliability. Made by Mean Well.
  6. Mean Well LED Switching Power Supply - SE Series 450-1000W Enclosed Power Supply - 24V DC

    $21.99 ea.
    Mean Well LED Switching Power Supply - SE Series 450-1000W Enclosed Power Supply - 24V DC Part Number: SE-x-24
    In stock
    A low cost, economical LED power supply. Provides protections against short circuit, over load, over voltage. Low cost, high reliability. Made by Mean Well.
  7. Mean Well LED Switching Power Supply - LRS Series 100-350W Enclosed Power Supply - 24V DC

    $21.99 ea.
    Mean Well LED Switching Power Supply - LRS Series 100-350W Enclosed Power Supply - 24V DC Part Number: LRS-x-24
    In stock
    A low cost, economical LED power supply. Provides protections against short circuit, over load, over voltage. Low cost, high reliability. Made by Mean Well.
  8. LED Switching Power Supply - DiodeDrive® Series - 60W-150W Enclosed Power Supply - 24V

    $31.99 ea.
    LED Switching Power Supply - DiodeDrive® Series - 60W-150W Enclosed Power Supply - 24V Part Number: CVPS-xWM-24V
    In stock
    DiodeDrive Class 2 switching power supply is designed for constant voltage operation. Fully enclosed in a waterproof case, the durable device will with stand moisture and dust for a long lifespan. Reliable and widely applicable, use it to power LED lights inside or outside with out energy waste or risk of circuit overload.
  9. LED Switching Power Supply - DiodeDrive® Series - 60W-240W Enclosed Power Supply - 24V

    $33.99 ea.
    LED Switching Power Supply - DiodeDrive® Series - 60W-240W Enclosed Power Supply - 24V Part Number: CVPS-xWH-24V
    In stock
    DiodeDrive Class 2 switching power supply is fully enclosed with a heavy duty case to with stand water and debris for a long lifespan. Guaranteed with a 7 year warranty, the reliable device is designed for constant voltage operation. Widely applicable, use it to power LED lights inside or outside with out energy waste or risk of circuit overload.
  10. Magnitude Dimmable LED Driver - Super Compact - 24 Volt

    $119.99 ea.
    Magnitude Dimmable LED Driver - Super Compact - 24 Volt Part Number: ExR24DC
    In stock
    The Magnitude super-compact dimmable LED driver with built-in junction box is class-2 rated and has a maximum load of 96 watts. The 24-volt driver is encased in a low-profile aluminum enclosure to enable easy installation for cabinet lighting, under-cabinet lighting, cove lighting, bookshelf lighting, showcase lighting, cupboard lighting, or for other applications where space is limited. Features auto reset, over-current, and short-circuit protection. Efficiency of 90% and above allows the driver to operate at low temperatures. Compatible with TRIAC dimmers.
  11. Mean Well LED Switching Power Supply - PWM Series 40-120W LED Power Supply - 24V Dimmable

    $38.99 ea.
    Mean Well LED Switching Power Supply - PWM Series 40-120W LED Power Supply - 24V Dimmable Part Number: PWM-x-24
    In stock
    A low cost, economical LED power supply. Provides protections against short circuit, over load, over voltage. Low cost, high reliability. Made by Mean Well.
  12. Mean Well LED Switching Power Supply - SP Series 100-320W Enclosed LED Power Supply with Built-in PFC - 24V DC

    $53.99 ea.
    Mean Well LED Switching Power Supply - SP Series 100-320W Enclosed LED Power Supply with Built-in PFC - 24V DC Part Number: RSP-x-24
    In stock
    * Universal AC input / Full range
    * Built-in active PFC function, PF>0.93
    * Protections: Short circuit / Overload / Over voltage / Over temperature
    * Built-in constant current limiting circuit
    * Remote ON-OFF control(Optional)
    * LED indicator for power on
    * 100% full load burn-in test
    * Fixed switching frequency at PFC:67KHz PWM:134KHz
    * 3 years warranty
    * Made by Mean Well
  13. View all

    Power Supplies

    16 additional compatible accessories

  1. CPS-x2ST Standard Barrel Connector to Screw Terminal Adapter

    $1.99 ea.
    CPS-x2ST Standard Barrel Connector to Screw Terminal Adapter Part Number: CPS-x2ST
    In stock
    CPS-x2ST standard 5.5mm male or female barrel connector to screw terminal adapter. CPS-F2ST adapter allows products with pigtail power connections to be powered by CPS series power supplies.
  2. NFLS10-2CPTH 8mm Flexible Light Strip Solderless Clamp On Pigtail Adapter
    $0.59 ea.
    NFLS10-2CPTH 10mm Flexible Light Strip Solderless Clamp On Pigtail Adapter - 10mm Clamp on Pigtail Adapter Part Number: NFLS10-2CPTH
    Out of stock
    10mm Flexible Light Strip Solderless Clamp On Pigtail Adapter. Use for connecting NFLS-X3 Flexible Light Strips and Strip segments. 16.25cm(6.4in) length.
  3. View all

    Connectors

    22 additional compatible accessories

  1. Low Profile Aluminum LED Strip Channel - Surface Mount LED Extrusion - KLUS MICRO-ALU Series

    $9.99 ea.
    MICRO-ALU LED Strip Channel - Surface / Flush Mount - 11mm Part Number: B1888
    In stock
    The KLUS MICRO-ALU Series LED strip channel is a low-profile (6mm deep) mounting solution for surface mounting or flush mounting LED strip lights up to 11mm wide. Able to reach a waterproof rating for wet areas.
  2. Corner Aluminum LED Strip Channel - Surface Mount LED Extrusion - KLUS 45-ALU Series

    $18.99 ea.
    45-ALU LED Strip Channel - Corner Mount - 11mm Part Number: B4023ANODA
    In stock
    The KLUS® 45-ALU series LED aluminum profile housing is a professional corner mounting solution for LED strip lights up to 11mm wide. This anodized extruded aluminum accent channel fits 90-degree corners and is available with a clear lens or a frosted lens for smooth, 45-degree angle lighting with no visible hot spots. Create a defined "line of light" illumination with specific lens and LED strip combinations. Available with a clear or frosted lens in black, silver, or white.
  3. MICRO-NK LED Strip Channel - Universal

    $13.99 ea.
    MICRO-NK LED Aluminum Aluminum Strip Channel - Flush Mount - 11mm Part Number: C1587ANODA_x
    In stock
    The KLUS® MICRO-NK LED Strip Channel is a low-profile (6mm height) flush mount aluminum profile housing for LED strip lights up to 11mm wide with exposed silver anodized bevel for an appealing presentation. KLUS designed this flush mount extruded aluminum channel to reach a waterproof rating for wet area use.
  4. TAMI LED Strip Channel - Surface / Flush Mount - 12mm - 1m - Frosted Lens

    $9.95 ea.
    TAMI LED Strip Channel - Surface / Flush Mount - 12mm - 1m - Frosted Lens Part Number: B5390ANODA/Frosted Cover
    In stock
    The KLUS TAMI Series LED strip channel with a frosted lens offers a professional mounting solution for surface or flush mounting LED strip lights up to 12mm wide. The low-profile (7mm deep) extruded aluminum channel comes in a 1m (3.3 ft) length and can reach a waterproof rating for wet areas.
  5. Klus B4574 - GIP series Surface Mount Anodized Aluminum LED Profile Housing

    $16.99 ea.
    GIZA LED Strip Channel - Surface Mount - 24mm Part Number: B5556ANODA
    In stock
    The KLUS GIP series LED architectural aluminum profile can house LED strip lights up to 24mm wide and provide a single diffused line of light when used with an optional lens. It has multiple installation options and can reach a waterproof rating for wet areas.
  6. PDS-NK LED Strip Channel - Universal

    $14.99 ea.
    PDS-NK LED Aluminum Strip Channel - Flush Mount - 13mm Part Number: C1588ANODA
    In stock
    The KLUS® PDS-NK LED Strip Channel is a flush mount aluminum profile housing for LED strip lights up to 13mm wide with a small exposed silver anodized bevel for an appealing presentation. The flush mount design is ideal for bookshelves, cupboards, under-cabinet shelf lighting, furniture, and more. Available with a clear or frosted lens.
  7. SILER LED Strip Channel

    $17.99 ea.
    SILER LED Strip Channel - Surface Mount - 14mm Part Number: B9325ANODA
    In stock
    KLUS designed the SILER strip channel as a professional exterior mounting solution for LED strips up to 14mm wide. The silver anodized extrusion can reach a waterproof rating for wet areas. Available in 1m (3.3 ft) and 2m (6.6 ft) lengths with an optional frosted lens.
  8. PDS-4-ALU LED Aluminum Strip Channel - Flush / Surface Mount - 11mm

    $9.99 ea.
    PDS-4-ALU LED Aluminum Strip Channel - Flush / Surface Mount - 11mm Part Number: B1718
    In stock
    The KLUS® PDS-4-ALU LED Strip Channel series provides a professional aluminum profile housing mount for LED strip lights up to 11mm wide. The extruded aluminum channels work as surface and flush mount options and are designed to reach a waterproof rating for wet areas. Available with a clear or frosted lens in black, silver, or white.
  9. Klus B4369ANODA - STOS-ALU series Angled Surface Mount Aluminum LED Profile Housing

    $18.99 ea.
    STOS-ALU LED Strip Channel - Surface Mount - 13mm Part Number: B4369ANODA
    In stock
    KLUS designed the STOS-ALU series LED aluminum profile housing for T-molding lighting, transition strip lighting, walkway lighting, or aisle lighting on buses, trains, and airplanes. Also, use it in place of chair rail molding. This angled surface mount is a professional mounting solution for LED strip lights up to 13mm wide and can reach a waterproof rating for wet areas. Available in 1m (3.3 ft) and 2m (6.6 ft) lengths with an optional clear or frosted lens.
  10. LIPOD LED Strip Channel

    $29.99 ea.
    LIPOD LED Strip Channel - Surface / Flush Mount - 21mm Part Number: B5554ANODA
    In stock
    The KLUS LIPOD architectural strip channel can house LED strip lights up to 21mm wide, providing a single line of diffused light. The anodized extruded aluminum is designed for installation in ceilings and drywall and can reach a waterproof rating for damp areas. Available in 1m (3.3 ft) and 2m (6.6 ft) lengths with an optional black or frosted lens.
  11. PDS-H LED Strip Channel

    $15.99 ea.
    PDS-H LED Strip Channel - Surface Mount - 14mm Part Number: B9204ANODA
    In stock
    KLUS designed the PDS-H strip channel to create a visually appealing fixture when installed using the optional concealed mounting brackets. The silver anodized extrusion houses LED strips up to 14mm wide.Available in 1m (3.3 ft) and 2m (6.6 ft) lengths with an optional clear or frosted lens.
  12. KRAV-810 LED Strip Channel - Edge Lit Acrylic / Glass Profile - 10mm

    $50.85 ea.
    KRAV-810 LED Strip Channel - Edge Lit Acrylic / Glass Profile - 10mm Part Number: 18016ANODA
    In stock
    The non-structural KLUS® KRAV-810 aluminum channel extrusion provides a professional mounting solution for edge-lighting glass or Plexiglas panels with LED strips up to 10mm wide. Compatible with transparent or frosted panels 8-10mm thick, the silver anodized aluminum strip is installed using included self-adhesive tape and clasps. Not intended for construction or support.
  13. View all

    Housings

    24 additional compatible accessories

Reviews

0 / 5 stars
0 reviews

Write Your Own Review

Write a Review

You're reviewing: Custom Length Single Color LED Strip Light - Highlight Series Tape Light - 24V - IP20 - 310 lm/ft

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

  • Review text does not pertain to the product
  • Abusive and offensive language
  • Photos are not related to the reviewed product
  • Any violation of laws and/or copyrighted material
  • Unrelated hyperlinks/URLs