24V LED Light Sheet - 18.9” x 9.5” - IP20 - XH Pin Connection - 20mm Segments - 3000K / 4000K / 5000K


Features
- Customizable sheet of LEDs to fit complex shapes and signage
- On-board XH connections for plug-and-play use
- 1.18" enclosure rating for low clearance spaces
- Use the 3M™ adhesive backing for easy installation
Frequently Bought Together
Loading recommendations...
Overview
Product Details:
- Segment size: 0.79" x 0.79"- 288 segments per sheet
- Max Run with Class 2 wiring: 3 sheets
- Input connection: 2-pin XH connector
- Includes one 0.5m pigtail connector and one 8cm interconnect
- 1.18" (30mm) enclosure rating
- PWM dimmable
- 24 VDC
- UL Listed
- 5-year warranty
Specifications
Ambient Operating Temperature | -20~+45 °C (-4~+113 °F) |
---|---|
Certifications/Compliance | UL Listed |
CRI | 80+ |
Current Draw
Current Draw
Current draw is calculated using the following formula: W/V = A, where W = the amount of power your light needs (wattage), V is the electrical system voltage (e.g., 120V AC), and A = amps. An ampere or amp (A) is the standard unit for electrical current. A milliamp (mA) equals one-thousandth of an amp, or 1000 mA is equivalent to 1 A.
Choosing LED fixtures with the correct amperage ensures safe and proper operation, preventing damage or injury. We recommend having all electrical components and fixtures installed by a certified professional electrician or lighting technician in compliance with all relevant standards and regulations. |
1.25 A |
Dimensions | 18.9in x 9.5in |
Dimmable | Yes |
Dimmer Type | PWM |
Enclosed Fixture Rated | Yes |
Finish | White |
Input Connection Type | Pigtail, XH 2-Pin Connector |
IP Rating
IP Rating
![]() |
IP20 |
LED Beam Angle
LED Beam Angle
Beam angle is used to express the width of the light emitting from the source. The narrower the beam angle the more focused the light energy is. Comparing two 40 watt lights one with a beam angle of 30(a) and another with a beam angle of 90(b), They both produce the same amount of light output but (a) will appear brighter in the beam angle compared to (b) at the sacrifice of light spread.
![]() |
120° |
LED Type | 2835 SMD |
LEDs per Segment | 1 |
LED Lifetime | 50000 Hours |
Max Run (Class 2)
Max Run (Class 2)
The Max Run of an LED strip is dependent on two things, voltage and density. 24 volt strips in most instances will give you a longer run than a 12 volt strip. However the LED density of the strip will have an effect on the maximum run. If your install needs to extend beyond a strips Max Run additional power feeds can be run back to your power supply. ![]() ![]() |
3 Sheets |
Operating Voltage | 24 VDC |
Output Connection Type | XH 2-Pin Connector |
Segment Size | 0.79 in. x 0.79 in. (20 mm x 20 mm) |
Wattage | 30 Watts |
Part NO |
Color Temperature
Color Temperature
![]() Correlated Color Temperature is the hue, or tint of white to expect from a light source and is measured in kelvin. Lower numbers give off a warmer white that is closer to candle light, and is good for relaxed and cozy spaces. Higher numbers give off a cooler white light that will appear more blueish. While values to the middle of the spectrum give off a more neutral or natural white light that is similar to daylight. |
Efficacy |
Environmental Rating
Environmental Rating
![]() |
LED Color |
---|---|---|---|---|
LLS-A30K80-C1A-30A01-24V (XH) | 3000K | 88 lm/W | Non-weatherproof | Warm 3000K |
LLS-A40K80-C1A-30A01-24V (XH) | 4000K | 92 lm/W | Non-weatherproof, Suitable for Dry Locations | Natural 4000K |
LLS-A50K80-C1A-30A01-24V (XH) | 5000K | 92 lm/W | Non-weatherproof, Suitable for Dry Locations | Cool 5000K |
Accessories & Power Supplies
Reviews
Review Guidelines
Super Bright LEDs reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs