Toggle Nav
My Cart 0
Top
Shop By Category
Account
Site Tools
Optronics GloLight LED Clearance or Side Marker Light - Submersible - 6 LEDs - 2" Round - Amber / Red

Optronics GloLight LED Clearance or Side Marker Light - Submersible - 6 LEDs - 2" Round - Amber / Red

Part Number
MCL155xBP

Features

  • Distinctive GloLight design creates a solid panel of light
  • Sonically sealed, waterproof
  • Mounts with grommet (sold separately)
  • Lifetime Warranty
View more details
In Stock

$12.99 ea.
Add to Wish List Compare

Free Shipping: On orders $300 and up. Flat rate shipping for other qualifying orders. Learn More⇒

main product photo
5 photos
Frequently Bought Together
Optronics GloLight LED Clearance or Side Marker Light - Submersible - 6 LEDs - 2" Round - Red
Optronics GloLight LED Clearance or Side Marker Light - Submersible - 6 LEDs - 2" Round - Red
$12.99 ea.
+
Grommet for 2" Round Trailer Lights - Flush Mount - Open Back
Grommet for 2" Round Trailer Lights - Flush Mount - Open Back
$2.49 ea.
+
Right Angle 2-Wire Pigtail for Optronics Trailer Lights - 2-Pin PL-10 Plug - 6" Long
Right Angle 2-Wire Pigtail for Optronics Trailer Lights - 2-Pin PL-10 Plug - 6" Long
$2.99 ea.
Total Price: $18.47

Overview

Description
The 2" round GloLight by Optronics features waterproof construction for side marker and clearance light applications. Use to upgrade amber or red incandescent lights easily. Constructed of a durable polycarbonate housing and lens. Connect using the PL-10 connection. Recessed mount with grommet (sold separately). P2 rated.
Product Details:
  • Durable polycarbonate housing and lens
  • P2 Rated
  • IP67 waterproof rating
  • Mounts with grommet(sold separately)
  • 12 VDC
  • Lifetime Warranty
DOT
DOT
Lifetime
Lifetime
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures—such as headlights and taillights—that have a DOT compliance mark are legal, safe, and considered to provide suitable illumination for street use when properly installed.
Super Bright LEDs, Inc. warrants that products carrying a lifetime warranty will be free from defects in the material and workmanship for the lifetime of the product. If Super Bright LEDs verifies that the defect was not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product with the same product. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More

Applications

  • Semi-Truck Lighting
  • Side Marker Lights
  • Freightliner Light
  • Flatbed Truck Lights
  • Trailer Lights
  • LED Clearance Lights
  • Peterbilt Truck Lights

Specifications

Ambient Operating Temperature -30~+50 °C (-22~+122 °F)
Brand Optronics
Certifications/Compliance DOT Compliant
Current Draw 60 mA
Diameter 2 in
DOT Standard FMVSS 108
Environmental Rating Waterproof
FMVSS Code P2
Input Connection Type PL-10
Input Voltage 12 VDC
IP Rating IP67
LED Quantity 6 LEDs
Mount Type Grommet
Power Consumption 0.7 Watts
Product Materials Polycarbonate
Series GloLight
Warranty Lifetime
Print Specifications
Swipe left to see additional specifications
Part NO LED Color
MCL155ABP Amber
MCL155RBP Red

All specifications are subject to change without notice. All products are RoHS compliant.

Accessories & Power Supplies

All Accessories
Installation Supplies
Mounting
Wiring
Connectors
Grommets

Accessories Links

Accessory Category
  1. 22-12 AWG Waterproof Silicone Filled Twist-On Wire Connector
    $0.45 ea.
    22-12 AWG Waterproof Silicone Filled Twist-On Wire Connector Part Number: WWN-2212
    In stock
    UL listed waterproof wire connectors suitable for all wire splices, especially those exposed to condensation, water, vapors or dust. 22-12 AWG Blue wire connector pre-filled with silicone to seal and protect connection from moisture. Not suitable for submersed connections. Price for each.
  2. Corrugated Split Loom

    $0.19 ea.
    Corrugated Split Loom Part Number: CSL-x
    In stock
    CSL-x series black polyethylene corrugated split looms. Protects and conceal wires, cables, and tubings. Splits down the side to allow covering of pre-installed wiring. Corrugated split looms are available in 1/4", 3/8", 1/2", and 3/4" sizes.
  3. Weatherproof Dolphin Super B Connector with Sealant - 100 Pieces

    $9.95 ea.
    Weatherproof Dolphin Super B Connector with Sealant - 100 Pieces Part Number: DC-x-S
    In stock

    Dolphin Super B Connectors provide the industry’s most reliable connection with their unique design and tine structure. They reduce costs, will not corrode and do not require insulation stripping of most wire gauges before insertion. Weatherproof IP65 rating. Available in a 100 Pack.

  4. psb-x-hole-snap-bushing

    $0.15 ea.
    Hole Snap-In Strain Relief Bushing Part Number: PSB-x
    In stock
    Eliminates sharp edges and protects wires and harnesses passing through holes in metal plates and panels. Resists up to 35 pounds pull.
  5. 16-14 AWG Female Bullet Connector - Insulated Quick-Connect Crimp Terminal
    $0.09 ea.
    16-14 AWG Female Bullet Connector - Insulated Quick-Connect Crimp Terminal - 16-14 AWG Part Number: BFN-164
    In stock
    Use this female bullet connector to quickly connect and disconnect 16-14 AWG wire. The fully insulated terminal is made of clear nylon to easily inspect connections. This terminal mates with 16-14 AWG and 22-18 AWG male bullet connectors.
  6. Black Cable Ties - 10 Pack

    $0.39 ea.
    Black Cable Ties - 10 Pack Part Number: CT-B-10
    In stock
    4, 6, and 11 inch Cable tie - .875" max dia.; 6 inch Cable tie - 1.50" max dia.; 11 inch Cable tie with - 3.062" max dia.; 16 inch Stud Mount Cable tie - 4.125" max dia.
  7. 16-14 AWG Male Bullet Connector - Insulated Quick-Connect Crimp Terminal
    $0.09 ea.
    16-14 AWG Male Bullet Connector - Insulated Quick-Connect Crimp Terminal - 16-14 AWG Part Number: BMN-164
    In stock
    Use this male bullet connector to quickly connect and disconnect 16-14 AWG wire. The fully insulated terminal is made of clear nylon to easily inspect connections. This terminal mates with 16-14 AWG and 22-18 AWG female bullet connectors.
  8. Grommet for 2" Round Trailer Lights - Flush Mount - Open Back
    $2.49 ea.
    Grommet for 2" Round Trailer Lights - Flush Mount - Open Back Part Number: A54GB
    In stock

    Mount a 2" round trailer light to a truck or trailer using the open back grommet. Durable PVC construction.

  9. 16 Gauge Wire - Four Conductor Power Wire
    $0.99 per Foot
    4-Wire Trailer Wire - 16 Gauge Parallel Bonded Wire - Four Conductor - 16 AWG Power Wire Part Number: WP16-4
    In stock
    This 4-wire trailer wiring is for low voltage installations. Parallel bonded four conductor 16 gauge 1x16 stranded wire. Commonly used for trailer wiring. Price per foot.
  10. Nylon Push Mount Base for Cable Ties
    $0.69 ea.
    Nylon Push Mount Base for Cable Ties - Push Mount Part Number: PMB-250
    In stock
    Cable tie mounting base to secure wires on surface. Fits 1/4" diameter hole - For ties up to 3/8" wide.
  11. Connector Grease
    $1.99 ea.
    Dielectric Electrical Connector Grease - 4 Grams Part Number: CP-1
    In stock
    High performance silicone based dielectric grease that can be applied to any electrical connection to keep out moisture and prevent corrosion. Use with connectors, sockets, pigtails, trailer connections, headlight/taillight bulb bases, contacts, etc. Includes (1) 0.14-ounce packet.
  12. Right Angle 2-Wire Pigtail for Optronics Trailer Lights - 2-Pin PL-10 Plug - 6" Long
    $2.99 ea.
    Right Angle 2-Wire Pigtail for Optronics Trailer Lights - 2-Pin PL-10 Plug - 6" Long Part Number: A46PB
    In stock

    To connect an LED clearance or side marker lights with a PL-10 connector to power, use the 2-wire pigtail connector. 6" straight pigtail wire leads with stripped end and eyelet ground wire.

  13. View all

    All Accessories

    13 additional compatible accessories

    View All Compatible Accessories
  1. Corrugated Split Loom

    $0.19 ea.
    Corrugated Split Loom Part Number: CSL-x
    In stock
    CSL-x series black polyethylene corrugated split looms. Protects and conceal wires, cables, and tubings. Splits down the side to allow covering of pre-installed wiring. Corrugated split looms are available in 1/4", 3/8", 1/2", and 3/4" sizes.
  2. Weatherproof Dolphin Super B Connector with Sealant - 100 Pieces

    $9.95 ea.
    Weatherproof Dolphin Super B Connector with Sealant - 100 Pieces Part Number: DC-x-S
    In stock

    Dolphin Super B Connectors provide the industry’s most reliable connection with their unique design and tine structure. They reduce costs, will not corrode and do not require insulation stripping of most wire gauges before insertion. Weatherproof IP65 rating. Available in a 100 Pack.

  3. psb-x-hole-snap-bushing

    $0.15 ea.
    Hole Snap-In Strain Relief Bushing Part Number: PSB-x
    In stock
    Eliminates sharp edges and protects wires and harnesses passing through holes in metal plates and panels. Resists up to 35 pounds pull.
  4. 16-14 AWG Female Bullet Connector - Insulated Quick-Connect Crimp Terminal
    $0.09 ea.
    16-14 AWG Female Bullet Connector - Insulated Quick-Connect Crimp Terminal - 16-14 AWG Part Number: BFN-164
    In stock
    Use this female bullet connector to quickly connect and disconnect 16-14 AWG wire. The fully insulated terminal is made of clear nylon to easily inspect connections. This terminal mates with 16-14 AWG and 22-18 AWG male bullet connectors.
  5. Black Cable Ties - 10 Pack

    $0.39 ea.
    Black Cable Ties - 10 Pack Part Number: CT-B-10
    In stock
    4, 6, and 11 inch Cable tie - .875" max dia.; 6 inch Cable tie - 1.50" max dia.; 11 inch Cable tie with - 3.062" max dia.; 16 inch Stud Mount Cable tie - 4.125" max dia.
  6. 16-14 AWG Male Bullet Connector - Insulated Quick-Connect Crimp Terminal
    $0.09 ea.
    16-14 AWG Male Bullet Connector - Insulated Quick-Connect Crimp Terminal - 16-14 AWG Part Number: BMN-164
    In stock
    Use this male bullet connector to quickly connect and disconnect 16-14 AWG wire. The fully insulated terminal is made of clear nylon to easily inspect connections. This terminal mates with 16-14 AWG and 22-18 AWG female bullet connectors.
  7. Connector Grease
    $1.99 ea.
    Dielectric Electrical Connector Grease - 4 Grams Part Number: CP-1
    In stock
    High performance silicone based dielectric grease that can be applied to any electrical connection to keep out moisture and prevent corrosion. Use with connectors, sockets, pigtails, trailer connections, headlight/taillight bulb bases, contacts, etc. Includes (1) 0.14-ounce packet.
  1. Nylon Push Mount Base for Cable Ties
    $0.69 ea.
    Nylon Push Mount Base for Cable Ties - Push Mount Part Number: PMB-250
    In stock
    Cable tie mounting base to secure wires on surface. Fits 1/4" diameter hole - For ties up to 3/8" wide.
  2. Heavy Duty Mount for Cable Ties: HDM-187

    $1.99 ea.
    Heavy Duty Mount for Cable Ties Part Number: HDM-x
    In stock

    Heavy-duty mount for cable ties to secure wires to surfaces up to 1/2" wide. A small tab inside the mounting hole temporarily engages threads, allowing assemblers to pre-install the mount on a stud before securing it with a washer and nut (not included). Available in #10 size mounting hole (1/4") and #8 size mounting hole (3/16").

  1. 22-12 AWG Waterproof Silicone Filled Twist-On Wire Connector
    $0.45 ea.
    22-12 AWG Waterproof Silicone Filled Twist-On Wire Connector Part Number: WWN-2212
    In stock
    UL listed waterproof wire connectors suitable for all wire splices, especially those exposed to condensation, water, vapors or dust. 22-12 AWG Blue wire connector pre-filled with silicone to seal and protect connection from moisture. Not suitable for submersed connections. Price for each.
  2. 16 Gauge Wire - Four Conductor Power Wire
    $0.99 per Foot
    4-Wire Trailer Wire - 16 Gauge Parallel Bonded Wire - Four Conductor - 16 AWG Power Wire Part Number: WP16-4
    In stock
    This 4-wire trailer wiring is for low voltage installations. Parallel bonded four conductor 16 gauge 1x16 stranded wire. Commonly used for trailer wiring. Price per foot.
  1. Right Angle 2-Wire Pigtail for Optronics Trailer Lights - 2-Pin PL-10 Plug - 6" Long
    $2.99 ea.
    Right Angle 2-Wire Pigtail for Optronics Trailer Lights - 2-Pin PL-10 Plug - 6" Long Part Number: A46PB
    In stock

    To connect an LED clearance or side marker lights with a PL-10 connector to power, use the 2-wire pigtail connector. 6" straight pigtail wire leads with stripped end and eyelet ground wire.

  1. Grommet for 2" Round Trailer Lights - Flush Mount - Open Back
    $2.49 ea.
    Grommet for 2" Round Trailer Lights - Flush Mount - Open Back Part Number: A54GB
    In stock

    Mount a 2" round trailer light to a truck or trailer using the open back grommet. Durable PVC construction.

Reviews

5 / 5 stars
1 reviews

Write Your Own Review

Write a Review

You're reviewing: Optronics GloLight LED Clearance or Side Marker Light - Submersible - 6 LEDs - 2" Round - Amber / Red

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

  • Review text does not pertain to the product
  • Abusive and offensive language
  • Photos are not related to the reviewed product
  • Any violation of laws and/or copyrighted material
  • Unrelated hyperlinks/URLs

Save 10% on all orders by joining our mailing list
Get top deals, latest products, and more.