Name: LED Truck and Trailer Rear Combination Lamps - Stop / Turn / Tail Lights - Pair
Brand: Super Bright LEDs
SKU: CTL2-AR
Price: 24.99 USD
Availability: InStock

Overview

These LED Stop/Turn/Tail truck and trailer rear combination lamps meet DOT FMVSS 108 and SAE requirements for use as tail lights, brake lights, parking lights, and turn signals. The amber and red light heads have a durable housing that you can mount vertically or horizontally on either side of box trucks, tow trucks, dump trucks, ton trucks, trailers, and flatbed trucks. These energy-efficient LED lamps operate in a broad 12-80 VDC range. The sealed light heads have an IP67 waterproof rating. Lights include mounting hardware.

Product Details:

Polystyrene lens
IP67 Waterproof
Stud mount
12-80 VDC
Meets FMVSS 108 requirements for automotive lighting
Lifetime Warranty

The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures—such as headlights and taillights—that have a DOT compliance mark are legal, safe, and considered to provide suitable illumination for street use when properly installed.

Super Bright LEDs, Inc. warrants that products carrying a lifetime warranty will be free from defects in the material and workmanship for the lifetime of the product. If Super Bright LEDs verifies that the defect was not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product with the same product. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More

Applications

Emergency Vehicle Lighting
Flatbed Truck Lights
Trailer Lights
Tow Truck Lights
Box Truck Lights
Service Vehicle Lighting

Specifications

Ambient Operating Temperature	-20~+65 °C (-4~+149 °F)
Beam Angle Beam angle is used to express the width of the light emitting from the source. The narrower the beam angle the more focused the light energy is. Comparing two 40 watt lights one with a beam angle of 30(a) and another with a beam angle of 90(b), They both produce the same amount of light output but (a) will appear brighter in the beam angle compared to (b) at the sacrifice of light spread.	120°
Brand	Super Bright LEDs
Certifications/Compliance	DOT Compliant
Current Draw Current Draw is used to size fuses and wire for a circuit. Current draw is the amount of energy consumed by an LED or LEDs in an electrical circuit at a specific voltage, measured in amps (A) or milliamps (mA).	1 A @ 12 VDC
DOT Standard	FMVSS 108
FMVSS Code Learn more about environmental rating	I, S, T
Input Connection Type	Pigtail
IP Rating Learn more about IP rating	IP67
LED Color	Amber/Red
LED Quantity	12 LEDs
Mount Type	Stud
Output Connection Type	Pigtail
PC Rated	No
Power Consumption	12 Watts
Product Materials	Polystyrene
Warranty	Lifetime

Print Specifications

Accessories & Power Supplies

All Accessories

Installation Supplies

Mounting

Wiring

Accessories Links

Accessory Category

Accessory Type:

$0.69 ea.

Nylon Push Mount Base for Cable Ties - Push Mount Part Number: PMB-250
In stock

Cable tie mounting base to secure wires on surface. Fits 1/4" diameter hole - For ties up to 3/8" wide.
$1.99 ea.

Heavy Duty Mount for Cable Ties Part Number: HDM-x
In stock

Heavy-duty mount for cable ties to secure wires to surfaces up to 1/2" wide. A small tab inside the mounting hole temporarily engages threads, allowing assemblers to pre-install the mount on a stud before securing it with a washer and nut (not included). Available in #10 size mounting hole (1/4") and #8 size mounting hole (3/16").

$0.45 ea.

22-12 AWG Waterproof Silicone Filled Twist-On Wire Connector Part Number: WWN-2212
In stock

UL listed waterproof wire connectors suitable for all wire splices, especially those exposed to condensation, water, vapors or dust. 22-12 AWG Blue wire connector pre-filled with silicone to seal and protect connection from moisture. Not suitable for submersed connections. Price for each.
$0.99 per Foot

4-Wire Trailer Wire - 16 Gauge Parallel Bonded Wire - Four Conductor - 16 AWG Power Wire Part Number: WP16-4
In stock

This 4-wire trailer wiring is for low voltage installations. Parallel bonded four conductor 16 gauge 1x16 stranded wire. Commonly used for trailer wiring. Price per foot.

Reviews

%

0 / 5 stars

0 reviews

Write Your Own Review

Write a Review

You're reviewing: LED Truck and Trailer Rear Combination Lamps - Stop / Turn / Tail Lights - Pair

Select Rating

1 star 2 stars 3 stars 4 stars 5 stars

Nickname

Email Address

Summary

Review

Technical Level

Add your photo

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

Review text does not pertain to the product
Abusive and offensive language
Photos are not related to the reviewed product
Any violation of laws and/or copyrighted material
Unrelated hyperlinks/URLs

LED Truck and Trailer Rear Combination Lamps - Stop / Turn / Tail Lights - Pair

Features

Product Photos

Dimensional Drawings