5m RGB+CCT COB LED Strip Light - COB Series LED Tape Light - IP65 - 24V
Features
- COB LEDs create seamless line of light - no visible hotspots
- Flexible, cuttable, 3M™ adhesive-backed design for easy install
- Smooth color blending and saturation of RGB and tunable whites: 2700K-6500K
- IP65 Rated for wet locations
- High density design with 256 LEDs/ft (840 LEDs/m)
Overview
- 3M™ adhesive backing for surface mounting
- Max run: 16.4 ft (5 m)
- Cuttable segment length: 1.64 in. (41.7 mm)
- 14mm strip width
- PWM Dimming
- IP65 waterproof rating
- Weatherproof connector with included pigtail adapter
- 24 VDC
- UL Listed
- 5-year warranty
COB Strips Specification Sheet - Accent Lighting
- Cove Lighting
- Decks
- Displays
- Outdoor Accent Lights
- Outdoor Kitchens
- Patios
- Sign Lighting
- Stage & Theaters
- Toe Kick Lighting
- Trade Shows
- Under-Cabinets
COB
COB (Chip-on-Board) LEDs integrate multiple LED chips onto a single module, offering higher brightness and better light distribution in larger lighting installations. This design makes them excellent for high-output applications. Typically, they also have a higher density, producing a "line of light" illumination, making them ideal for lighting reflective surfaces like polished countertops or glass retail displays.
RGB+Tunable White
RGB+Tunable White LED strips and bulbs emit any fixed RGB color and a range of variable white CCT values.
Specifications
| Ambient Operating Temperature | -20~+45 °C (-4~+113 °F) |
|---|---|
| Certifications/Compliance | CE, UL Listed |
|
Color Temperature
Color Temperature
Correlated Color Temperature is the hue, or tint of white to expect from a light source and is measured in kelvin. Lower numbers give off a warmer white that is closer to candle light, and is good for relaxed and cozy spaces. Higher numbers give off a cooler white light that will appear more blueish. While values to the middle of the spectrum give off a more neutral or natural white light that is similar to daylight. |
Tunable CCT |
| CRI | 90+ |
|
Current Draw
Current Draw
Current draw is calculated using the following formula: W/V = A, where W = the amount of power your light needs (wattage), V is the electrical system voltage (e.g., 120V AC), and A = amps. An ampere or amp (A) is the standard unit for electrical current. A milliamp (mA) equals one-thousandth of an amp, or 1000 mA is equivalent to 1 A.
Choosing LED fixtures with the correct amperage ensures safe and proper operation, preventing damage or injury. We recommend having all electrical components and fixtures installed by a certified professional electrician or lighting technician in compliance with all relevant standards and regulations. |
3.8 A |
|
Current Draw per Foot
Current Draw per Foot
Current Draw Per Foot is used to size power supplies, normally converted to watts per foot. This is equated using total wattage divided by number of linear feet. Current draw per foot is the amount of current consumed by an LED or LEDs in an electrical circuit per linear foot at a specific voltage, measured in milliamps (mA) or watts (W).
|
229mA |
| Dimmable | Yes |
| Dimmer Type | PWM |
| Efficacy | 83 lm/W |
|
Environmental Rating
Environmental Rating
|
Suitable for Wet Locations, Waterproof |
| Finish | White |
| Input Connection Type | Pigtail, Weatherproof Connector |
|
IP Rating
IP Rating
|
IP65 |
|
LED Beam Angle
LED Beam Angle
Beam angle is used to express the width of the light emitting from the source. The narrower the beam angle the more focused the light energy is. Comparing two 40 watt lights one with a beam angle of 30(a) and another with a beam angle of 90(b), They both produce the same amount of light output but (a) will appear brighter in the beam angle compared to (b) at the sacrifice of light spread.
|
160° |
| LED Color | RGB+Tunable CCT |
| LED Density | 256 LEDs/ft |
| LED Type | COB (chip-on-board) |
| LEDs per Segment | 35 |
| Length | 16.4 ft (5 m) |
| LED Lifetime | 36000 Hours |
| Lumens Per Foot | 455 lm/ft |
|
Max Run (Class 2)
Max Run (Class 2)
The Max Run of an LED strip is dependent on two things, voltage and density. 24 volt strips in most instances will give you a longer run than a 12 volt strip. However the LED density of the strip will have an effect on the maximum run. If your install needs to extend beyond a strips Max Run additional power feeds can be run back to your power supply. 
|
Up to 16.4ft (5m) |
| Minimum Cut Length | 41.65mm (1.64in) |
| Operating Voltage | 24 VDC |
| Series | COB |
| Strip Width | 15mm (0.59in) |
| Wattage | 90 Watts |
| Wattage per Foot | 5.5 W/ft |
| Wire Length | 1.7 ft (51.8 cm) |
Accessories & Power Supplies
Reviews
Review Guidelines
Super Bright LEDs reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs
