Need help? Contact us.

Free Shipping: On orders over $300

Learn More⇒

Same Day Shipping: When you order before 3pm CST

Learn More⇒

Commercial Accounts: Personalized product recommendations, and quotes.

Learn More⇒

Toggle Nav
Search
My Cart 0
Top
Shop By Category
Account
Site Tools
Back
RGB LED Strip Lights - 12V LED Tape Light w/ LC4 Connector - 244 Lumens/ft.

RGB LED Strip Lights - 12V LED Tape Light w/ LC4 Connector - 126 Lumens/ft.

Part Number
NFLS-RGBX2-LC4

Discontinued

We have discontinued this product permanently. Please find suggested replacement products from below section.

Free Shipping: On orders $300 and up. Flat rate shipping for other qualifying orders. Learn More⇒

Similar Products

  1. 5m Digital RGB LED Strip Light - Addressable Color-Chasing LED Tape Light - 12V - IP67

    5m Digital RGB LED Strip Light - 18 LEDs/ft - Addressable Color-Chasing LED Tape Light - 12V - IP67 - RGB

  2. Tunable White LED Strip Light Reel - Color Temperature Changing 24V LED Tape Light - 511 Lumens/ft.

    2016 Tunable White LED Strip Light/Tape Light - 24V - IP20 - 511 Lumens/ft - NFLS-VCTH1200

  3. 30m RGB LED Strip Light - Color-Changing LED Tape Light - 24V - IP20

    30m RGB LED Strip Light - Color-Changing LED Tape Light - 24V - IP20 - RGB - 1181.4in (98.40ft)

Share:
main product photo
53 photos

Overview

This flexible RGB LED light strip is perfect for cabinet lighting, under-cabinet lighting, toe-kick lighting, cove lighting, task lighting, bookshelf lighting, showcase lighting, cupboard lighting, bias lighting, or for other indoor applications where space is limited. Using up to 300 multicolor LEDs, the light strip emits up to 126 lumens of powerful illumination per foot. The 1-5/8', 3-1/4', or 16-3/8' LED Strip can be easily cut into 3-LED segments and installed with its peel-and-stick adhesive backing. Attached LC4 locking connectors let you easily power and join multiple strips. Strips have separate RGB power inputs and common anode wire. The RGB LED light strip operates within a 9-14.8 VDC range and can be used with any of our universal RGB controllers for color-changing options. Also available in standard-density version or a 24 VDC version for longer continuous runs.
UL Listed
UL Listed
ISA Approved
ISA Approved
5 Years
5 Years
Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Listed label means that product samples have been tested by UL and that the product meets their Standards for Safety requirements.
Products that have an International Solid-State Lighting Alliance (ISA) label are approved as quality, energy-efficient LED lights that help to create a sustainable society.
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More

Applications

  • Sign Lighting
  • LED Backlights
  • Task Lighting
  • Accent Lighting
  • Off Grid Lighting
  • Retail
  • Coves
  • Under-Cabinets
  • Display Cases
  • Trade Shows

Specifications

Beam Angle 180°
Cuttable Segment Length 50mm (1.97in)
Dimmable Yes
Environmental Rating Non-weatherproof
Input Connection Type LC4 Female
Color Options RGB
LED Density 18 LEDs/ft
LED Lifetime 40000 Hours
LED Type 5050 SMD
LEDs per Segment 3
Lumen 2065 Lumen
Lumen Per Foot 126 lm/ft
Standards And Certifications ISA Approved, UL Listed
Strip Width 10mm (0.39in)
UL File Number E357850
Voltage 9-14.8 VDC
Wire Length 9in(22.8cm)
Print Specifications
Swipe left to see additional specifications
Part NO Current Draw Current Draw per Foot LED Quantity Length Max Run Power Consumption Wattage per Foot
NFLS-RGB150X2-WHT-LC4 3.3A (3300mA) 201mA 300 LEDs 16.4ft (5m) 1 39.5 Watts 2.4 W/ft (7.9 W/m), 3 Watts
NFLS-RGB15X2-WHT-LC4 0.4A (400mA) 248mA 30 LEDs 1.64ft (0.5m) 10 4.9 Watts 3 Watts

All specifications are subject to change without notice. All products are RoHS compliant.

Accessories & Power Supplies

All Accessories
Controllers
Channels
Power Supplies
Connectors
Remotes
Installation Supplies

Accessories Links

Accessory Category
  1. LED DMX512 Decoder - 4 Channel - 4 A/CH - Address Digital Display - 12-24 VDC
    $18.99 ea.
    LED DMX512 Decoder - 4 Channel - 4 A/CH - Address Digital Display - 12-24 VDC Part Number: DMX3-4CH-4A
    In stock
    The DMX512 decoder can control up to 4 different constant voltage LED products or any one RGBW light bar or strip. Decoder can run in standalone mode using the address digital display or under DMX512 digital control signals using an RJ45 input/output interface. Connect up to 4 amps per channel- 15 amps maximum for decoder. The decoder can control a maximum load of 180W using 12 VDC or 360W using 24 VDC.
  2. Wi-Fi / Bluetooth RGB LED Controller - Alexa / Google Assistant / Smartphone Compatible - 12-24 VDC
    $23.99 ea.
    Wi-Fi / Bluetooth RGB LED Controller - Alexa / Google Assistant / Smartphone Compatible - 12-24 VDC Part Number: MCSH2-3CH-72W
    In stock
    Wi-Fi/Bluetooth LED controller lets you operate RGB LED strip lights with your Alexa or Google Assistant-enabled devices or your smartphone using the Smart Life app by Tuya. The app comes with a range of customizations for the strip lights: conditional programming, timers, scheduling, mode selection memory, and a built-in microphone.
  3. LED DMX512 Decoder - 3 Channel - 8 A/CH - 12-24 VDC with included Male and Female XLR3 connectors
    $17.99 ea.
    LED DMX512 Decoder - 3 Channel - 8 A/CH - 12-24 VDC Part Number: DMX3-3CH-8A
    In stock
    The DMX512 decoder can control up to 3 different LED constant voltage products or any one RGB light bar or strip. Run the decoder under DMX512 digital control signals using the RJ45 or XLR3 input/output interfaces. For manual use, set the starting address of the driver using the DIP switches. Connect up to 8 amps per channel- 15 amps maximum for decoder. The decoder can control a maximum load of 180W using 12 VDC or 360W using 24 VDC. Includes one male and one female XLR3 connector. Includes one male and one female XLR3 connector.
  4. LED DMX512 Decoder - 3 Channel - 8 A/CH - Address Digital Display - 12-24 VDC with included Male and Female XLR3 connectors
    $19.99 ea.
    LED DMX512 Decoder - 3 Channel - 8 A/CH - Address Digital Display - 12-24 VDC Part Number: DMX4-3CH-8A
    In stock
    The DMX512 decoder can control up to 3 different constant voltage LED products or any one RGB light bar or strip. Decoder can run in standalone mode using the address digital display or under DMX512 digital control signals using an RJ45 or XLR3 input/output interface. Connect up to 8 amps per channel- 15 amps maximum for decoder. The decoder can control a maximum load of 180W using 12 VDC or 360W using 24 VDC. Includes one male and one female XLR3 connector.
  5. MiBoxer LED Controller - Wireless RGB LED Strip Lights - Hubless - 6 Amps / Channel - 12-24 VDC
    $23.99 ea.
    MiBoxer LED Controller - Wireless RGB LED Strip Lights - Hubless - 6 Amps / Channel - 12-24 VDC Part Number: FUT037W
    In stock

    Control an RGB LED strip light from anywhere using a smartphone or tablet to access the customization settings and functions. Use the app to select between a range of RGB colors, select between the pre-programmed modes, adjust the brightness, and use the timer function. For hands-free operation, connect to an Alexa or Google Assistant.The controller is also compatible with Bluetooth control and optional remote control.

  6. U9 Standalone DMX RDM Controller - 512 Channels - Software and 5VDC USB Power Supply Included
    $299.99 ea.
    SLESA-U9 Standalone DMX RDM Controller - 256 Channels - Software and 5VDC USB Power Supply Included Part Number: SLESA-U9
    In stock
    Easily program the standalone DMX controller using a Windows PC or MAC computer. Set up 20 scenes and 1 zone using the ESA2 software on a computer. It is USB power-based with 8 dry contact HE10 ports and an XLR3 output port. A USB power cable, power adapter, and programming software are included.
  7. U10 Wi-Fi Standalone DMX RDM Controller - 1024 Channels - Software and 5VDC USB Power Supply Included
    $574.99 ea.
    SLESA-U10 Wi-Fi Standalone DMX RDM Controller - 512 Channels - Software and 5VDC USB Power Supply Included Part Number: SLESA-U10
    In stock
    Easily program the standalone DMX controller using a Windows PC or MAC computer. Set up 99 scenes and 1 zone using the ESA2 or ESA2 PRO software on a computer. It is USB power-based with 8 dry contact HE10 ports and two XLR3 output ports. For operation via smartphone or tablet, use in standalone mode and connect the controller to Wi-Fi.
  8. DiodeDrive® Desktop AC Power Adapter - 12 VDC Switching Power Supply - 60W-120W

    $19.99 ea.
    DiodeDrive® Desktop AC Power Adapter - 12 VDC Switching Power Supply - 60W-120W Part Number: CPS-12V-x0W
    In stock
    CPS series Power Adaptor from DiodeDrive provides power for 12 VDC systems, in either 60 or 120-watts. The reliable Class II device has a fully enclosed plastic case and protection against short circuit and overload. 2-pin 120 VAC input. 5.5-mm barrel connector for easy powering.
  9. LED Switching Power Supply - DiodeDrive® Series - 60-100W Enclosed Power Supply - 12V

    $21.99 ea.
    LED Switching Power Supply - DiodeDrive® Series - 60-100W Enclosed Power Supply - 12V Part Number: CVPS-xWP-12V
    In stock
    This LED switching power supply has been designed for constant voltage operation. Reliable and widely applicable, it powers LED technology with out energy waste or risk of circuit overload. Fully enclosed in a waterproof case.
  10. MICRO-ALU LED strip channel - surface / flush mount - 11mm

    $9.99 ea.
    MICRO-ALU LED Strip Channel - Surface / Flush Mount - 11mm Part Number: B1888
    In stock
    The KLUS MICRO-ALU Series LED strip channel is a low-profile (6mm deep) mounting solution for surface mounting or flush mounting LED strip lights up to 11mm wide. Able to reach a waterproof rating for wet areas.
  11. Wall-Mounted AC Adapter - 12 VDC Power Supply - 12-36W

    $7.99 ea.
    DiodeDrive® Wall-Mounted AC Adapter - 12 VDC Power Supply - 12W / 18W / 24W / 36W / 48W Part Number: CPS-12V-xW
    In stock
    Power Adaptor from DiodeDrive provides power for 12 VDC systems. The Class II device has an enclosed plastic case and protection against electoral shock. 2-Prong 120 VAC input. 5.5-mm barrel connector.
  12. KLUS 45-ALU LED strip channels in silver, white, and black with optional lenses

    $18.99 ea.
    45-ALU LED Strip Channel - Corner Mount - 11mm Part Number: B4023ANODA
    In stock
    The KLUS® 45-ALU series LED aluminum profile housing is a professional corner mounting solution for LED strip lights up to 11mm wide. This anodized extruded aluminum accent channel fits 90-degree corners and is available with a clear lens or a frosted lens for smooth, 45-degree angle lighting with no visible hot spots. Create a defined "line of light" illumination with specific lens and LED strip combinations. Available with a clear or frosted lens in black, silver, or white.

  13. View all

    All Accessories

    1 additional compatible accessories

    View All Compatible Accessories
  1. LED DMX512 Decoder - 4 Channel - 4 A/CH - Address Digital Display - 12-24 VDC
    $18.99 ea.
    LED DMX512 Decoder - 4 Channel - 4 A/CH - Address Digital Display - 12-24 VDC Part Number: DMX3-4CH-4A
    In stock
    The DMX512 decoder can control up to 4 different constant voltage LED products or any one RGBW light bar or strip. Decoder can run in standalone mode using the address digital display or under DMX512 digital control signals using an RJ45 input/output interface. Connect up to 4 amps per channel- 15 amps maximum for decoder. The decoder can control a maximum load of 180W using 12 VDC or 360W using 24 VDC.
  2. Wi-Fi / Bluetooth RGB LED Controller - Alexa / Google Assistant / Smartphone Compatible - 12-24 VDC
    $23.99 ea.
    Wi-Fi / Bluetooth RGB LED Controller - Alexa / Google Assistant / Smartphone Compatible - 12-24 VDC Part Number: MCSH2-3CH-72W
    In stock
    Wi-Fi/Bluetooth LED controller lets you operate RGB LED strip lights with your Alexa or Google Assistant-enabled devices or your smartphone using the Smart Life app by Tuya. The app comes with a range of customizations for the strip lights: conditional programming, timers, scheduling, mode selection memory, and a built-in microphone.
  3. LED DMX512 Decoder - 3 Channel - 8 A/CH - 12-24 VDC with included Male and Female XLR3 connectors
    $17.99 ea.
    LED DMX512 Decoder - 3 Channel - 8 A/CH - 12-24 VDC Part Number: DMX3-3CH-8A
    In stock
    The DMX512 decoder can control up to 3 different LED constant voltage products or any one RGB light bar or strip. Run the decoder under DMX512 digital control signals using the RJ45 or XLR3 input/output interfaces. For manual use, set the starting address of the driver using the DIP switches. Connect up to 8 amps per channel- 15 amps maximum for decoder. The decoder can control a maximum load of 180W using 12 VDC or 360W using 24 VDC. Includes one male and one female XLR3 connector. Includes one male and one female XLR3 connector.
  4. LED DMX512 Decoder - 3 Channel - 8 A/CH - Address Digital Display - 12-24 VDC with included Male and Female XLR3 connectors
    $19.99 ea.
    LED DMX512 Decoder - 3 Channel - 8 A/CH - Address Digital Display - 12-24 VDC Part Number: DMX4-3CH-8A
    In stock
    The DMX512 decoder can control up to 3 different constant voltage LED products or any one RGB light bar or strip. Decoder can run in standalone mode using the address digital display or under DMX512 digital control signals using an RJ45 or XLR3 input/output interface. Connect up to 8 amps per channel- 15 amps maximum for decoder. The decoder can control a maximum load of 180W using 12 VDC or 360W using 24 VDC. Includes one male and one female XLR3 connector.
  5. MiBoxer LED Controller - Wireless RGB LED Strip Lights - Hubless - 6 Amps / Channel - 12-24 VDC
    $23.99 ea.
    MiBoxer LED Controller - Wireless RGB LED Strip Lights - Hubless - 6 Amps / Channel - 12-24 VDC Part Number: FUT037W
    In stock

    Control an RGB LED strip light from anywhere using a smartphone or tablet to access the customization settings and functions. Use the app to select between a range of RGB colors, select between the pre-programmed modes, adjust the brightness, and use the timer function. For hands-free operation, connect to an Alexa or Google Assistant.The controller is also compatible with Bluetooth control and optional remote control.

  6. U9 Standalone DMX RDM Controller - 512 Channels - Software and 5VDC USB Power Supply Included
    $299.99 ea.
    SLESA-U9 Standalone DMX RDM Controller - 256 Channels - Software and 5VDC USB Power Supply Included Part Number: SLESA-U9
    In stock
    Easily program the standalone DMX controller using a Windows PC or MAC computer. Set up 20 scenes and 1 zone using the ESA2 software on a computer. It is USB power-based with 8 dry contact HE10 ports and an XLR3 output port. A USB power cable, power adapter, and programming software are included.
  7. U10 Wi-Fi Standalone DMX RDM Controller - 1024 Channels - Software and 5VDC USB Power Supply Included
    $574.99 ea.
    SLESA-U10 Wi-Fi Standalone DMX RDM Controller - 512 Channels - Software and 5VDC USB Power Supply Included Part Number: SLESA-U10
    In stock
    Easily program the standalone DMX controller using a Windows PC or MAC computer. Set up 99 scenes and 1 zone using the ESA2 or ESA2 PRO software on a computer. It is USB power-based with 8 dry contact HE10 ports and two XLR3 output ports. For operation via smartphone or tablet, use in standalone mode and connect the controller to Wi-Fi.
  8. MiBoxer WiFi Smart Multi Zone RGB Controller - 6 Amps/Channel
    $17.99 ea.
    MiBoxer WiFi Smart Multi Zone RGB Controller - 6 Amps/Channel - RGB Controller (Receiver) Part Number: RGB-MZ
    In stock
    Universal Red/Green/Blue (RGB) LED WiFi Compatible Controller & Dimmer with out remote. Use to control up to four separate "zones" of RGB LED strips that will be linked and controlled by one or several wireless remotes or smartphones with the Wi-Fi LED Controller Gateway. Synchronization function allows a single remote to operate one or multiple controllers (User configurable). Maximum load is 6 amps per channel, 24 amps total. Must be paired with Wi-Fi LED Controller Gateway (WIFI-CON -- Sold separately) for adjusting all controller functions using a Smartphone or tablet running Android or iOS using the free MiLight 3.0 app.
  9. MiBoxer WiFi Smart Multi Zone RGB Controller with Touch Remote - 6 Amps/Channel

    $37.90 ea.

    MiBoxer WiFi Smart Multi Zone RGB Controller with Touch Remote - 6 Amps/Channel - RGB Controller (Receiver) (Remote) Part Number: LDRF-RGB-MZ
    In stock
    Universal multi-zone Red/Green/Blue (RGB) LED WiFi Compatible Controller & Dimmer with hand held RF Touch Color Remote (Requires 2 "AAA" batteries -- Not Included). Can control up to four separate "zones" of RGB lights to be linked and controlled by one wireless remote. Synchronization function allows a single remote to operate one or multiple controllers (User configurable). Color selection wheel provides thousands of color options and 9 dynamic color-changing modes with speed, brightness and ON/OFF controls. Maximum load is 6 amps per channel, 18 amps total. Must be paired with Wi-Fi LED Controller Gateway (WIFI-CON -- Sold separately) for adjusting all controller functions using a Smartphone or tablet running Android or iOS using the free MiBoxer app.
  10. Wireless LED 4 Channel EZ Dimmer Controller w/ Channel Pairing
    $59.99 ea.
    Wireless LED 4 Channel EZ Dimmer Controller with Channel Pairing - EZD-4C8A Part Number: EZD-4C8A
    In stock
    Designed for use with in the EZ Dimmer series, this wireless 4 channel LED dimmer controller operates with in a 12-36 VDC while receiving RF signals from a compatible wireless LED dimmer wall switch. The LED receiver has a maximum load capacity of 32 amps and has spring terminal connectors for in and out power connections.
  11. MCBRF-RGB4 Mini RGB Controller with RF Remote
    $12.99 / set
    Mini RGB Controller with RF Remote - Dynamic Color-Changing Modes - 4 Amps/Channel - Mini RGB LED Controller Part Number: MCBRF-RGB4
    In stock
    Universal Red/Green/Blue (RGB) LED Controller & Dimmer with RF Remote. Remote can control any 12VDC or 24VDC RGB LED products. 20 static color modes with dimming controls, and 19 dynamic color-changing modes with speed controls. Features power cycle mode retention and CPS power plug for easy plug and play installation. Maximum load is 4 Amps per channel - 12 Amps total. 4-pin RGB pigtail connector and battery for RF remote included.
  12. RGB LED Controller - Wireless RF Touch Color Remote with Dynamic Color-Changing Modes - 8 Amps/Channel

    $24.99 ea.
    RGB LED Controller - Wireless RF Touch Color Remote with Dynamic Color-Changing Modes - 8 Amps/Channel Part Number: LDRF-RGB8-TC3x
    In stock
    Use this RGB LED controller with wireless touch-color RF remote to control your RGB LED light strips. Choose from 29 dynamic color-changing modes with adjustable speed and brightness levels or from static color and white modes with adjustable brightness levels, and control your light strip from up to 65' away. The remote is completely touch activated with a color wheel for direct, fine-tuned color selection. The remote also has power, pause, brightness control, dynamic mode selection, and speed-selection touch buttons. Power-cycle mode retention allows your light strip to return to the mode that was selected before it was powered off. The polarity-sensitive controller has a maximum load capacity of 8 amps per red, green, or blue channel and is compatible with LED light strips that operate with in a 12-24V DC range. Red and green lights on the controller let you see when it is receiving power and signal from the RF remote. Screw slots allow for permanent controller mounting. Remote is available in white or black and requires 3 AAA batteries (not included).

  13. View all

    Controllers

    35 additional compatible accessories

    View All Compatible "Controllers" Accessories
  1. MICRO-ALU LED strip channel - surface / flush mount - 11mm

    $9.99 ea.
    MICRO-ALU LED Strip Channel - Surface / Flush Mount - 11mm Part Number: B1888
    In stock
    The KLUS MICRO-ALU Series LED strip channel is a low-profile (6mm deep) mounting solution for surface mounting or flush mounting LED strip lights up to 11mm wide. Able to reach a waterproof rating for wet areas.
  2. KLUS 45-ALU LED strip channels in silver, white, and black with optional lenses

    $18.99 ea.
    45-ALU LED Strip Channel - Corner Mount - 11mm Part Number: B4023ANODA
    In stock
    The KLUS® 45-ALU series LED aluminum profile housing is a professional corner mounting solution for LED strip lights up to 11mm wide. This anodized extruded aluminum accent channel fits 90-degree corners and is available with a clear lens or a frosted lens for smooth, 45-degree angle lighting with no visible hot spots. Create a defined "line of light" illumination with specific lens and LED strip combinations. Available with a clear or frosted lens in black, silver, or white.
  3. MICRO-NK LED Strip Channel - Universal

    $13.99 ea.
    MICRO-NK LED Aluminum Aluminum Strip Channel - Flush Mount - 11mm Part Number: C1587ANODA_x
    In stock
    The KLUS® MICRO-NK LED Strip Channel is a low-profile (6mm height) flush mount aluminum profile housing for LED strip lights up to 11mm wide with exposed silver anodized bevel for an appealing presentation. KLUS designed this flush mount extruded aluminum channel to reach a waterproof rating for wet area use.
  4. TAMI LED Strip Channel - Surface / Flush Mount - 12mm - 1m - Frosted Lens

    $9.95 ea.
    TAMI LED Strip Channel - Surface / Flush Mount - 12mm - 1m - Frosted Lens Part Number: B5390ANODA/Frosted Cover
    In stock
    The KLUS TAMI Series LED strip channel with a frosted lens offers a professional mounting solution for surface or flush mounting LED strip lights up to 12mm wide. The low-profile (7mm deep) extruded aluminum channel comes in a 1m (3.3 ft) length and can reach a waterproof rating for wet areas.
  5. GIZA Low profile aluminum surface mount LED strip channel

    $16.99 ea.
    GIZA LED Strip Channel - Surface Mount - 24mm Part Number: B5556ANODA
    In stock
    The KLUS GIP series LED architectural aluminum profile can house LED strip lights up to 24mm wide and provide a single diffused line of light when used with an optional lens. It has multiple installation options and can reach a waterproof rating for wet areas.
  6. PDS-NK LED Strip Channel - Universal

    $14.99 ea.
    PDS-NK LED Aluminum Strip Channel - Flush Mount - 13mm Part Number: C1588ANODA
    In stock
    The KLUS® PDS-NK LED Strip Channel is a flush mount aluminum profile housing for LED strip lights up to 13mm wide with a small exposed silver anodized bevel for an appealing presentation. The flush mount design is ideal for bookshelves, cupboards, under-cabinet shelf lighting, furniture, and more. Available with a clear or frosted lens.
  7. PDS-4-ALU LED Aluminum Strip Channel - Flush / Surface Mount - 11mm

    $9.99 ea.
    PDS-4-ALU LED Aluminum Strip Channel - Flush / Surface Mount - 11mm Part Number: B1718
    In stock
    The KLUS® PDS-4-ALU LED Strip Channel series provides a professional aluminum profile housing mount for LED strip lights up to 11mm wide. The extruded aluminum channels work as surface and flush mount options and are designed to reach a waterproof rating for wet areas. Available with a clear or frosted lens in black, silver, or white.
  8. Klus B4369ANODA - STOS-ALU series Angled Surface Mount Aluminum LED Profile Housing

    $18.99 ea.
    STOS-ALU LED Strip Channel - Surface Mount - 13mm Part Number: B4369ANODA
    In stock
    KLUS designed the STOS-ALU series LED aluminum profile housing for T-molding lighting, transition strip lighting, walkway lighting, or aisle lighting on buses, trains, and airplanes. Also, use it in place of chair rail molding. This angled surface mount is a professional mounting solution for LED strip lights up to 13mm wide and can reach a waterproof rating for wet areas. Available in 1m (3.3 ft) and 2m (6.6 ft) lengths with an optional clear or frosted lens.
  9. EX-ALU LED Strip Channel - Edge Lit Acrylic / Glass Profile - 11mm

    $82.99 ea.
    EX-ALU LED Strip Channel - Edge Lit Acrylic / Glass Profile - 11mm Part Number: B1890ANODA
    In stock
    The KLUS® EX-ALU LED aluminum channel extrusion profile provides a professional mounting solution for edge lighting 6mm glass or Plexiglas (acrylic) signs with sandblasting or laser-etched graphics and logos. The anodized profile holds LED strip lights up to 11mm wide. Use mounting brackets or 3M-FTS double-sided foam tape for surface mounting the fixture.
  10. Klus TAN-C5 Eco Series LED Strip Channel - Corner Mount with Lens - 10mm - 1m

    $14.95 ea.

    TAN-C5 LED Strip Channel - Corner Mount with Lens - 1m Part Number: B5391/Frosted Cover_1
    In stock
    The KLUS TAN-C5 Eco series LED aluminum profile housing is an economic corner mounting solution for LED strip lights up to 10mm wide. This 1m non-anodized extruded aluminum accent channel fits 90-degree corners and includes a frosted lens for smooth, 45-degree angle lighting with no visible hot spots.
  11. REGULOR LED strip channel - surface mount - adjustable beam - 11mm - 1m
    $18.99 ea.
    REGULOR LED Strip Channel - Surface Mount - Adjustable Beam - 11mm - 1m Part Number: B468+43ANODA_1
    In stock
    The KLUS REGULOR LED profile housing is a professional surface mount channel for LED strip lights up to 11mm wide with an adjustable insert enabling five different lighting angles. The 1m (3.3 ft) profile housing is an anodized aluminum extrusion. Use the optional transparent focusing lens and included adjustable insert to create a 10, 30, 45, 60, or 90-degree beam pattern.
  12. Klus PAC-ALU Angled Corner Mount Aluminum LED Profile Housing - B4370ANODA - 1m
    $18.99 ea.
    PAC-ALU LED Strip Channel - Corner Mount - 1m Part Number: B4370ANODA_1
    In stock
    The KLUS® PAC-ALU LED aluminum profile housing is a professional mounting solution for LED strip lights up to 13mm wide. This 1m anodized aluminum corner accent channel is compatible with standard and rigid frosted lenses for smooth lighting with no visible hot spots.

  13. View all

    Channels

    16 additional compatible accessories

    View All Compatible "Channels " Accessories
  1. DiodeDrive® Desktop AC Power Adapter - 12 VDC Switching Power Supply - 60W-120W

    $19.99 ea.
    DiodeDrive® Desktop AC Power Adapter - 12 VDC Switching Power Supply - 60W-120W Part Number: CPS-12V-x0W
    In stock
    CPS series Power Adaptor from DiodeDrive provides power for 12 VDC systems, in either 60 or 120-watts. The reliable Class II device has a fully enclosed plastic case and protection against short circuit and overload. 2-pin 120 VAC input. 5.5-mm barrel connector for easy powering.
  2. LED Switching Power Supply - DiodeDrive® Series - 60-100W Enclosed Power Supply - 12V

    $21.99 ea.
    LED Switching Power Supply - DiodeDrive® Series - 60-100W Enclosed Power Supply - 12V Part Number: CVPS-xWP-12V
    In stock
    This LED switching power supply has been designed for constant voltage operation. Reliable and widely applicable, it powers LED technology with out energy waste or risk of circuit overload. Fully enclosed in a waterproof case.
  3. Wall-Mounted AC Adapter - 12 VDC Power Supply - 12-36W

    $7.99 ea.
    DiodeDrive® Wall-Mounted AC Adapter - 12 VDC Power Supply - 12W / 18W / 24W / 36W / 48W Part Number: CPS-12V-xW
    In stock
    Power Adaptor from DiodeDrive provides power for 12 VDC systems. The Class II device has an enclosed plastic case and protection against electoral shock. 2-Prong 120 VAC input. 5.5-mm barrel connector.
  4. Mean Well LED Switching Power Supply - SE Series 450-1000W Enclosed Power Supply - 12V DC

    $23.99 ea.
    Mean Well LED Switching Power Supply - LRS / SE Series - 100-1000W - Enclosed - 12V DC Part Number: SE-x-12
    In stock
    A low cost, economical LED power supply. Provides protections against short circuit, over load, over voltage. Low cost, high reliability. Made by Mean Well.
  5. Mean Well LED Switching Power Supply - LPV Series 20-100W Single Output LED Power Supply - 12V DC

    $12.99 ea.
    Mean Well LED Switching Power Supply - LPV Series 20-100W Single Output LED Power Supply - 12V DC Part Number: LPV-x-12
    In stock
    The DC LPV Series 20-100W Mean Well LED Switching Power Supply is a reliable and economical 12V DC single-output power supply suitable for LED lighting and LED moving sign applications with short circuit, overload, and over-voltage protection.
  6. 12V DC Battery Power Supply - 8-Cell AA Battery Holder

    $1.99 ea.
    12 VDC Battery Power Supply - 8-Cell AA Battery Holder Part Number: BPS-12VDC
    In stock
    Use these portable battery power supplies for 12V LED strip lights or other 12 VDC products. The AA battery holders use eight cells and are available in a mountable slim inline profile, double-sided compact, double-sided wide, or with a cover and on/off switch. Each battery holder has a 5.5mm barrel connector.
  7. Mean Well LED Switching Power Supply - AP Series 12-35W Single Output LED Power Supply - 12V DC

    $8.99 ea.
    Mean Well LED Switching Power Supply - AP Series 12-35W Single Output LED Power Supply - 12V DC Part Number: APV-x-12
    In stock
    A low cost, economical LED power supply. Provides protections against short circuit, over load, over voltage. Low cost, high reliability. Made by Mean Well.
  8. LED Switching Power Supply - DiodeDrive® Series - 60W-150W Enclosed Power Supply - 12V

    $31.99 ea.
    LED Switching Power Supply - DiodeDrive® Series - 60W-150W Enclosed Power Supply - 12V Part Number: CVPS-xWM-12V
    In stock
    DiodeDrive Class 2 switching power supply is designed for constant voltage operation. Fully enclosed in a waterproof case, the durable device will with stand moisture and dust for a long lifespan. Reliable and widely applicable, use it to power LED lights inside or outside with out energy waste or risk of circuit overload.
  9. LED Switching Power Supply - DiodeDrive® Series - 60W-240W Enclosed Power Supply - 12V

    $33.99 ea.
    LED Switching Power Supply - DiodeDrive® Series - 60W-240W Enclosed Power Supply - 12V Part Number: CVPS-xWH-12V
    In stock
    Class 2 switching power supply from DiodeDrive is fully enclosed with a heavy duty case to with stand water and debris for a long lifespan. Backed by a 7 year warranty, the reliable device is designed for constant voltage operation. Use it to power a wide range of low voltage LED lighting applications, inside or outside, with out energy waste or risk of circuit overload.
  10. 12V DC Battery Power Supply - 8 Cell D Battery Holder - D Battery Power Supply
    $3.99 ea.
    12V DC Battery Power Supply - 8 Cell D Battery Holder - D Battery Power Supply Part Number: BPS-12VDC-D
    In stock
    Use this portable battery power supply for 12V LED strip lights or other 12 VDC products. The battery holder uses 8 D-cell batteries and has a double-sided design with a 5.5mm barrel connector. Run time will vary based on power draw and battery capacity. Use new alkaline batteries only. Also see AA holders.
  11. Mean Well LED Switching Power Supply - SP Series 100-320W Enclosed Power Supply with Built-in PFC - 12V DC

    $53.99 ea.
    Mean Well LED Switching Power Supply - SP Series 100-320W Enclosed Power Supply with Built-in PFC - 12V DC Part Number: RSP-x-12
    In stock
    * Universal AC input / Full range
    * Built-in active PFC function, PF>0.93
    * Protections: Short circuit / Overload / Over voltage / Over temperature
    * Built-in constant current limiting circuit
    * Remote ON-OFF control(Optional)
    * LED indicator for power on
    * 100% full load burn-in test
    * Fixed switching frequency at PFC:67KHz PWM:134KHz
    * 3 years warranty
    * Made by Mean Well
  12. Wall-Mounted Desktop Power Supply - 12V DC GST Series

    $13.99 ea.
    Wall-Mounted AC Adapter - 12 VDC Switching Power Supply 18W / 25W Part Number: GSTxU12-P1J
    In stock
    Use the economic 12 VDC Wall-Mounted Power Supply from Mean Well to power various compatible lights and devices. This Class II AC adapter protects against short circuits, overload, and over-voltage and has a 5.5mm barrel connector output and standard 1-15P 120 VAC input. Available in 18 or 25-watt maximum output.

  13. View all

    Power Supplies

    15 additional compatible accessories

    View All Compatible "Power Supplies" Accessories
  1. Solderless Clamp On LED Strip Light to Pigtail Adapter - 10mm RGB Strips - 22-18 AWG
    $1.49 ea.
    Solderless Clamp On LED Strip Light to Pigtail Adapter - 10mm RGB Strips - 22-18 AWG - STN10-4PC Part Number: STN10-4PC
    In stock
    Use this solderless adapter to connect your 10-mm RGB LED strip light to 22-18 gauge pigtail power wire. The clear connector easily clamps onto strip ends and pigtail wire with out stripping insulation. A secure-snap closure holds wire and strip in place.
  2. Solderless Clamp On Pigtail Adapter for 10mm RGB LED Strip Lights - 6"
    $0.69 ea.
    Solderless Clamp On Pigtail Adapter for 10mm RGB LED Strip Lights - 6" - STN10-4HCPT-15 Part Number: STN10-4HCPT-15
    In stock
    Use this solderless pigtail adapter to connect your 10-mm RGB LED strip light to power. The adapter has 6" power wire and a secure-snap closure that holds the strip end securely in place.
  3. LC4 Locking Connector Splitter Cable

    $1.99 ea.
    LC4 Locking Connector Splitter Cable Part Number: LC4-MxF
    In stock
    LC4-MxF series splitter cable for LC4 RGB Flexible Light Strips. Easily power multiple LC4 RGB flexible light strips with one Compact Power Supply. 20 gauge parallel bonded with polarized latching connector. Available in 22 in length with 2 or 4 plug and play connectors.
  4. LC4 Locking Connector Pigtail Power Cable: Female Connector

    $0.99 ea.
    LC4 Locking Connector Pigtail Power Cable Part Number: LC4x-PT
    In stock
    LC4F-CPS series pigtail power connector for LC4 RGB Flexible Light Strips. 20 gauge parallel bonded with polarized latching connector and stripped tinned ends. 63.5cm(25in) length.
  5. NFLS10-4CPTH Flexible Light Strip Pigtail Connector Clamp
    $0.99 ea.
    NFLS10-4CPTH Flexible Light Strip Pigtail Connector Clamp - Pigtail Connector Clamp Part Number: NFLS10-4CPTH
    In stock
    RGB series pigtail connector clamp. 10mm wide and 15.24cm(6in) length. This non-waterproof connector requires additional steps to waterproof.
  6. Direct Connect Clamp for 10mm RGB LED Strip Lights
    $0.59 ea.
    Direct Connect Clamp for 10mm RGB LED Strip Lights - STN10-4HC Part Number: STN10-4HC
    In stock
    Use this direct-connect clamp to join 10-mm RGB LED strip lights. A secure-snap closure holds strip segments in place.
  7. LC4 Locking Connector Power Cable Extension

    $1.49 ea.
    LC4 Locking Connector Power Cable Extension Part Number: LC4-EXT
    In stock
    LC4-EXT series extension cable for LC4 RGB flexible light strips. Available in 39in (3.28ft - 1 meter) and 118in (9.84ft - 3 meter) lengths.
  8. 6" Interconnect Jumper for 10mm RGB LED Strip Lights
    $0.99 ea.
    6" Interconnect Jumper for 10mm RGB LED Strip Lights - STN10-4HCHC-15 Part Number: STN10-4HCHC-15
    In stock
    Use this 6" interconnect jumper to join 10-mm RGB LED strip lights across gaps, cabinet lips, corners, and more. A secure-snap closure holds strip segments in place.
  9. LC4 Locking Connector Interconnect

    $0.49 ea.
    LC4 Locking Connector Interconnect Part Number: LC4-x
    In stock
    LC4 series interconnect jumper for connecting LC4 RGB Flexible Light Strips together. 22 gauge parallel bonded with polarized latching connector. 8.2cm (3.2in) length.
  10. NFLS10-4CSH 2 Contact 10mm Flexible Light Strip Interconnect
    $1.49 ea.
    NFLS10-4CSH 4 Contact 10mm Flexible Light Strip Interconnect - Interconnect Part Number: NFLS10-4CSH
    In stock
    10mm RGB flexible light strips interconnect jumper, solder-less inserts and connects NFLS series light strips.
  11. NFLS10-4CDH Flexible Light Strip Direct Connect Clamp
    $0.45 ea.
    NFLS10-4CDH Flexible Light Strip Direct Connect Clamp - Direct Connect Clamp Part Number: NFLS10-4CDH
    In stock
    RGB series solder-less four contact clamp type direct connect. 10mm wide, directly connects two RGB NFLS flexible light strips and strip segments. This non-waterproof connector requires additional steps to waterproof.
  12. NFLS-4CS90 Flexible Light Strip 90 Degree Connect
    $0.99 ea.
    NFLS-4CS90 Flexible Light Strip 90 Degree Connect - 90 Degree Connector Part Number: NFLS-4CS90
    In stock
    NFLS-4CS90 RGB series solder-less four contact connector. 10mm wide, 90 degree, connects two RGB NFLS flexible light strips and strip segments. Not compatible with RGB WFLS flexible lights strips.

  13. View all

    Connectors

    14 additional compatible accessories

    View All Compatible "Connectors" Accessories
  1. RGB/RGBW LED RF Remote - Wireless - 10 Dynamic Modes
    $22.99 ea.
    RGB/RGBW LED RF Remote - Wireless - 10 Dynamic Modes - DS-RGBW Part Number: DS-RGBW
    In stock
    DS series RF Remote pairs with a compatible receiver to control RGB/RGBW LEDs.
  1. 3M Automotive Adhesion Promoter
    $4.99 ea.
    3M Adhesion Promoter - Single Pack Part Number: 06396
    In stock

    3M Adhesion Promoter 06396 is a liquid primer specifically formulated for automotive applications that enhances adhesion of 3M Acrylic Foam Tapes for interior and exterior trim applications. The sponge applicator packet is easy to use and makes an ideal choice for LED strip light and aluminum extrusion installations.

Reviews

4.8 / 5 stars
5 reviews

Write Your Own Review

Write a Review

You're reviewing: RGB LED Strip Lights - 12V LED Tape Light w/ LC4 Connector - 126 Lumens/ft.

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

  • Review text does not pertain to the product
  • Abusive and offensive language
  • Photos are not related to the reviewed product
  • Any violation of laws and/or copyrighted material
  • Unrelated hyperlinks/URLs