Name: O-Shaped Aluminum LED Light Bar Fixture - 1,440 Lumens
Brand: Super Bright LEDs
SKU: ALB-xW1M-RO
Price: 21.99 USD
Availability: Discontinued
Rating: 3.5 (2 reviews)

Overview

O-Shaped Aluminum LED Light Bar Fixtures are great for workbench lighting, counter lighting, desk lighting, artwork lighting, and more. This LED light fixture emits 1,440 lumens of cool white or warm white illumination. Durable DC end connectors allow for hassle-free connection to up to 1 additional fixture and to a compatible power supply. Choose a clear lens for high light output or a frosted lens for smooth illumination without hot spots. The light fixture has 12 VDC operation. Steel clips are included for surface-mount installation.

Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More

Applications

LED Backlights
Task Lighting
Off Grid Lighting
Under-Cabinets
Display Cases
LED Workbench Light
Trade Shows

Specifications

Brightness	439 lm/ft
CRI	70+
Current Draw Current Draw is used to size fuses and wire for an electrical circuit. Current draw is the amount of energy consumed by an LED or LEDs in an electrical circuit at a specific voltage, measured in amps (A) or milliamps (mA).	2.25A (2250mA)
Current Draw per Foot Current Draw Per Foot is used to size power supplies, normally converted to watts per foot. This is equated using total wattage divided by number of linear feet. Current draw per foot is the amount of current consumed by an LED or LEDs in an electrical circuit per linear foot at a specific voltage, measured in milliamps (mA) or watts (W).	687mA
Dimmable	Yes
Environmental Rating Learn more about environmental rating	Non-weatherproof
LED Beam Angle Beam angle is used to express the width of the light emitting from the source. The narrower the beam angle the more focused the light energy is. Comparing two 40 watt lights one with a beam angle of 30(a) and another with a beam angle of 90(b), They both produce the same amount of light output but (a) will appear brighter in the beam angle compared to (b) at the sacrifice of light spread.	120°
LED Type	5630 SMD
Length	3.3ft (1m)
Max Run (Class 2) The Max Run of an LED strip is dependent on two things, voltage and density. 24 volt strips in most instances will give you a longer run than a 12 volt strip. However the LED density of the strip will have an effect on the maximum run. If your install needs to extend beyond a strips Max Run additional power feeds can be run back to your power supply.	2
Operating Voltage	12 VDC
Series	ALB
Strip Width	18.2mm (0.72in)
Wattage per Foot	2.5 Watts
Wire Length	12in(30.5cm)

Print Specifications

Part NO	CCT Value CCT Value	Color Temperature Color Temperature Correlated Color Temperature is the hue, or tint of white to expect from a light source and is measured in kelvin. Lower numbers give off a warmer white that is closer to candle light, and is good for relaxed and cozy spaces. Higher numbers give off a cooler white light that will appear more blueish. While values to the middle of the spectrum give off a more neutral or natural white light that is similar to daylight. Natural and cool white are considered ideal for task lighting.
ALB-CW1M-ROC	5800K	Cool 5800K
ALB-CW1M-ROF	5800K	Cool 5800K
ALB-WW1M-ROC	3000K	Warm 3000K
ALB-WW1M-ROF	3000K	Warm 3000K

Accessories & Power Supplies

All Accessories

Mounting

Dimmers

Power Supplies

Installation Supplies

Connectors

Switches

Controllers

Extension Cables

Splitter Cables

Accessories Links

Accessory Category

Accessory Type:

$0.35 ea.

3M-FTP Double-Sided Foam Pad - Double-Sided Foam Pad Part Number: 3M-FTP
In stock

High performance 3M Closed-Cell Acrylic Foam Tape Pads - adhesive on both sides for attaching light bars and other LED products to a wide variety of surfaces. Measures 1.25 x 0.625in, 0.088in thick.

$0.39 ea.

Black Cable Ties - 10 Pack Part Number: CT-B-10
In stock

4, 6, and 11 inch Cable tie - .875" max dia.; 6 inch Cable tie - 1.50" max dia.; 11 inch Cable tie with - 3.062" max dia.; 16 inch Stud Mount Cable tie - 4.125" max dia.

$1.99 ea.

CPS-x2ST Standard Barrel Connector to Screw Terminal Adapter Part Number: CPS-x2ST
In stock

CPS-x2ST standard 5.5mm male or female barrel connector to screw terminal adapter. CPS-F2ST adapter allows products with pigtail power connections to be powered by CPS series power supplies.
$1.49 ea.

CPS-PT Pigtail CPS Power Adapter Cable - Pigtail Wire CPS-Cable Part Number: CPS-PT
In stock

Pigtail wire leads power adapter cable for compact power supplies. Allows products with power wires to connect with 5.5mm barrel connector. 63.5cm(25in) length.
$0.85 ea.

CPS series Male to Male Direct Barrel Connectors - Male to Male Part Number: CPS-M2M
In stock

Standard 5.5mm male to male direct connector for CPS series Compact Power supplies or BPS Battery Power supply. Can be used to extend lengths of power wires.

$29.99 ea.

Wireless Single Color LED Dimmer Switch for EZ Dimmer Controller - EZD-1C-WM Part Number: EZD-1C-WM
In stock

Designed for use with the Wireless LED 1-Channel EZ Dimmer Receiver or Wireless LED 4 Channel EZ Dimmer Receiver with Channel Pairing, this single-color wireless LED dimmer switch fits in standard wall switch boxes and provides on/off control as well as fixed levels of dimmability. The dimmer knob transmits an RF signal to the wireless receiver from up to 300' away in open air. The wall-mounted wireless dimmer includes 2 mounting screws and a required 3V CR2032 battery installed.
$14.99 ea.

Mini RF Single Color Push Button LED Dimmer Switch with Magnetic Base for EZ Dimmer Controller - EZD-1C-PB Part Number: EZD-1C-PB
In stock

Designed for use with the Wireless LED 1-Channel EZ Dimmer Receiver or Wireless LED 4 Channel EZ Dimmer Receiver with Channel Pairing Option, this push-button LED dimmer switch features a magnetic base and provides both standard on/off controls as well as the ability to dim and brighten LED light strips. The push-button dimmer transmits an RF signal to the wireless receiver from up to 300' away in open air. The wireless dimmer includes 2 mounting screws and a required 3V CR2032 battery installed.

$2.49 ea.

CPS-EXTx series Power Cable Extensions Part Number: CPS-EXTx
In stock

CPS-EXTx extension cable for CPS power supplies or BPS-12VDC-x battery power supplies with 5.5mm barrel connector. Available in 100cm(39.3in) or 300cm(118in) length and is for low voltage DC cables.

$4.49 ea.

CPS-MxF Compact Power Supply to Splitter Cable Part Number: CPS-MxF
In stock

1 female 5.5mm barrel connector to 2 or 4 male 5.5mm barrel connectors for our CPS series power supplies. Easily power multiple products with one Compact Power Supply. 52.07cm(20.5in) length.

Reviews

70%

3.5 / 5 stars

2 reviews

Write Your Own Review

Write a Review

You're reviewing: O-Shaped Aluminum LED Light Bar Fixture - 1,440 Lumens

Select Product

Select Rating

1 star 2 stars 3 stars 4 stars 5 stars

Nickname

Email Address

Summary

Review

Technical Level

Add your photo

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

Review text does not pertain to the product
Abusive and offensive language
Photos are not related to the reviewed product
Any violation of laws and/or copyrighted material
Unrelated hyperlinks/URLs

O-Shaped Aluminum LED Light Bar Fixture - 1,440 Lumens

Discontinued

Similar Products

Product Photos

Videos