Toggle Nav
Search
My Cart 0
Top
Shop By Category
Account
Site Tools
LED Trailer Turn Signal Light - Sequential Arrow - 35 LEDs - Oval - Amber - 12V / 24V

LED Trailer Turn Signal Light - Sequential Arrow - 35 LEDs - Oval - Amber - 12V / 24V

Part Number
PT-A35-SFA
In Stock
$34.99 ea.
Add to Wish List Compare

Free Shipping: On orders $300 and up. Flat rate shipping for other qualifying orders. Learn More⇒

main product photo
11 photos
Most Popular
  1. PT series Mounting Grommet
    6-1/2" Oval Grommet for Trailer Lights
    $3.99 ea.
  2. PT series Mounting Bracket
    Mounting Bracket for 6-1/2" Oval Trailer Lights - Steel - Black
    $6.49 ea.
Loading...

Overview

Designed to accept industry standard 3-pin plugs, this 6” oval sequential arrow LED light is for use as a turn signal light. Mounts flush with a compatible grommet, bezel, or flange. Turn mode sequentially flashes 5 arrows starting from the center outward. This turn light boasts 35 high-flux LEDs that operate with in a wide 10-30V DC range and consumes 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. Lifetime warranty on all truck/trailer lights. Dimensions: 6.49”(16.472cm) x 1.86”(4.737cm) x 2.32”(5.893cm)
DOT
DOT
Lifetime
Lifetime
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures—such as headlights and taillights—that have a DOT compliance mark are legal, safe, and considered to provide suitable illumination for street use when properly installed.
Super Bright LEDs, Inc. warrants that products carrying a lifetime warranty will be free from defects in the material and workmanship for the lifetime of the product. If Super Bright LEDs verifies that the defect was not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product with the same product. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More

Applications

  • Emergency Vehicle Lighting
  • Semi-Truck Light
  • Freightliner Light
  • Flatbed Truck Lights
  • Trailer Lights
  • Tow Truck Lights
  • Box Truck Lights
  • RV Lights
  • Campers
  • Service Vehicle Lighting

Specifications

Current Draw 0.07A (70mA), 0.74A (740mA) (Turn)
DOT Standard FMVSS 108
IP Rating IP65
Mount Type Flange
Standards And Certifications DOT Compliant
Voltage 10-30 VDC
PC Rated No
Print Specifications

All specifications are subject to change without notice. All products are RoHS compliant.

Accessories & Power Supplies

All Accessories
Installation Supplies
Grommets
Connectors
Mounting
Most Popular

Accessories Links

Accessory Category
  1. Right Angle 3-PIN Plug
    $2.49 ea.
    Right Angle 3-Wire Pigtail for Trailer Lights - 3-Pin PL-3 Plug - 10" Lead Part Number: PL-3R
    In stock
    Designed for ST, PT, and RT series truck lights and trailer lights, the right angle 3-pin plug features 10 inch wires allowing for easy installation.
  2. 22-12 AWG Waterproof Silicone Filled Twist-On Wire Connector
    $0.45 ea.
    22-12 AWG Waterproof Silicone Filled Twist-On Wire Connector Part Number: WWN-2212
    In stock
    UL listed waterproof wire connectors suitable for all wire splices, especially those exposed to condensation, water, vapors or dust. 22-12 AWG Blue wire connector pre-filled with silicone to seal and protect connection from moisture. Not suitable for submersed connections. Price for each.
  3. Corrugated Split Loom

    $0.19 ea.
    Corrugated Split Loom Part Number: CSL-x
    In stock
    CSL-x series black polyethylene corrugated split looms. Protects and conceal wires, cables, and tubings. Splits down the side to allow covering of pre-installed wiring. Corrugated split looms are available in 1/4", 3/8", 1/2", and 3/4" sizes.
  4. PT series Mounting Grommet
    $3.99 ea.
    6-1/2" Oval Grommet for Trailer Lights Part Number: GR-65
    In stock
    Designed for 6 1/2 inch oval PT series trailer lights and truck lights, the grommet allows for recessed mounting of LED lights and requires a 6.76" x 2.5" hole.
  5. Weatherproof Dolphin Super B Connector with Sealant - 100 Pieces

    $9.95 ea.
    Weatherproof Dolphin Super B Connector with Sealant - 100 Pieces Part Number: DC-x-S
    In stock

    Dolphin Super B Connectors provide the industry’s most reliable connection with their unique design and tine structure. They reduce costs, will not corrode and do not require insulation stripping of most wire gauges before insertion. Weatherproof IP65 rating. Available in a 100 Pack.

  6. 16-14 AWG Perma-seal Butt Connectors
    $0.23 ea.
    16-14 AWG Butt Connectors - Butt Connectors Part Number: PSC-164
    In stock
    Use this butt connector to connect and seal 16-14 AWG wire. The insulated vinyl terminal protects wire connections from water, salt, and corrosion. Seal with a heat gun.
  7. Straight 3-PIN Plug
    $2.49 ea.
    3-Wire Pigtail for Trailer Lights - 3-Pin PL-3 Plug - 10" Lead Part Number: PL-3S
    In stock
    Designed for ST, PT, and RT series truck lights and trailer lights, the straight 3-pin plug features 10 inch wires allowing for easy installation.
  8. Right Angle 3-Wire Pigtail for Optronics Trailer Lights - 3-Pin PL-3 Plug - 10" Long
    $4.49 ea.
    Right Angle 3-Wire Pigtail for Optronics Trailer Lights - 3-Pin PL-3 Plug - 10" Long Part Number: A47PB
    In stock

    To connect an LED truck and trailer lights with a PL-3 connector to power, use the 3-wire pigtail connector. 10" right angle pigtail wire leads with stripped ends.

  9. PT series Mounting Bracket
    $6.49 ea.
    Mounting Bracket for 6-1/2" Oval Trailer Lights - Steel - Black Part Number: PT-BRKT
    In stock
    Constructed of durable steel, the 6.5 inch oval bracket is designed for PT series trailer lights and truck lights and allows for easy installation on common commercial or non-commercial trailers. Grommet sold separately.
  10. Black Cable Ties - 10 Pack

    $0.39 ea.
    Black Cable Ties - 10 Pack Part Number: CT-B-10
    In stock
    4, 6, and 11 inch Cable tie - .875" max dia.; 6 inch Cable tie - 1.50" max dia.; 11 inch Cable tie with - 3.062" max dia.; 16 inch Stud Mount Cable tie - 4.125" max dia.
  11. Grommet for 6" Oval Trailer Tail Lights
    $4.49 ea.
    Grommet for 6" Oval Trailer Tail Lights Part Number: A70GB
    In stock

    Mount a 6" oval trailer light to a truck or trailer using the open back grommet. Durable PVC construction.

  12. psb-x-hole-snap-bushing

    $0.15 ea.
    Hole Snap-In Strain Relief Bushing Part Number: PSB-x
    In stock
    Eliminates sharp edges and protects wires and harnesses passing through holes in metal plates and panels. Resists up to 35 pounds pull.

  13. View all

    All Accessories

    1 additional compatible accessories

    View All Compatible Accessories
  1. 22-12 AWG Waterproof Silicone Filled Twist-On Wire Connector
    $0.45 ea.
    22-12 AWG Waterproof Silicone Filled Twist-On Wire Connector Part Number: WWN-2212
    In stock
    UL listed waterproof wire connectors suitable for all wire splices, especially those exposed to condensation, water, vapors or dust. 22-12 AWG Blue wire connector pre-filled with silicone to seal and protect connection from moisture. Not suitable for submersed connections. Price for each.
  2. Corrugated Split Loom

    $0.19 ea.
    Corrugated Split Loom Part Number: CSL-x
    In stock
    CSL-x series black polyethylene corrugated split looms. Protects and conceal wires, cables, and tubings. Splits down the side to allow covering of pre-installed wiring. Corrugated split looms are available in 1/4", 3/8", 1/2", and 3/4" sizes.
  3. Weatherproof Dolphin Super B Connector with Sealant - 100 Pieces

    $9.95 ea.
    Weatherproof Dolphin Super B Connector with Sealant - 100 Pieces Part Number: DC-x-S
    In stock

    Dolphin Super B Connectors provide the industry’s most reliable connection with their unique design and tine structure. They reduce costs, will not corrode and do not require insulation stripping of most wire gauges before insertion. Weatherproof IP65 rating. Available in a 100 Pack.

  4. 16-14 AWG Perma-seal Butt Connectors
    $0.23 ea.
    16-14 AWG Butt Connectors - Butt Connectors Part Number: PSC-164
    In stock
    Use this butt connector to connect and seal 16-14 AWG wire. The insulated vinyl terminal protects wire connections from water, salt, and corrosion. Seal with a heat gun.
  5. Black Cable Ties - 10 Pack

    $0.39 ea.
    Black Cable Ties - 10 Pack Part Number: CT-B-10
    In stock
    4, 6, and 11 inch Cable tie - .875" max dia.; 6 inch Cable tie - 1.50" max dia.; 11 inch Cable tie with - 3.062" max dia.; 16 inch Stud Mount Cable tie - 4.125" max dia.
  6. psb-x-hole-snap-bushing

    $0.15 ea.
    Hole Snap-In Strain Relief Bushing Part Number: PSB-x
    In stock
    Eliminates sharp edges and protects wires and harnesses passing through holes in metal plates and panels. Resists up to 35 pounds pull.
  7. Connector Grease
    $1.99 ea.
    Dielectric Electrical Connector Grease - 4 Grams Part Number: CP-1
    In stock
    High performance silicone based dielectric grease that can be applied to any electrical connection to keep out moisture and prevent corrosion. Use with connectors, sockets, pigtails, trailer connections, headlight/taillight bulb bases, contacts, etc. Includes (1) 0.14-ounce packet.
  8. 16 Gauge Wire - Four Conductor Power Wire
    $0.99 per Foot
    4-Wire Trailer Wire - 16 Gauge Parallel Bonded Wire - Four Conductor - 16 AWG Power Wire Part Number: WP16-4
    In stock
    This 4-wire trailer wiring is for low voltage installations. Parallel bonded four conductor 16 gauge 1x16 stranded wire. Commonly used for trailer wiring. Price per foot.
  9. Nylon Push Mount Base for Cable Ties
    $0.69 ea.
    Nylon Push Mount Base for Cable Ties - Push Mount Part Number: PMB-250
    In stock
    Cable tie mounting base to secure wires on surface. Fits 1/4" diameter hole - For ties up to 3/8" wide.
  10. Heavy Duty Mount for Cable Ties: HDM-187

    $1.99 ea.
    Heavy Duty Mount for Cable Ties Part Number: HDM-x
    In stock
    Heavy-duty mount for cable ties to secure wires to surfaces up to 1/2" wide. A small tab inside the mounting hole temporarily engages threads, allowing assemblers to pre-install the mount on a stud before securing it with a washer and nut (not included). Available in #10 size mounting hole (1/4") and #8 size mounting hole (3/16"). Price for each.
  1. Grommet for 6" Oval Trailer Tail Lights
    $4.49 ea.
    Grommet for 6" Oval Trailer Tail Lights Part Number: A70GB
    In stock

    Mount a 6" oval trailer light to a truck or trailer using the open back grommet. Durable PVC construction.

  2. Grommet for 6" Oval Peterson Trailer Lights - Flush Mount
    $8.99 ea.
    Grommet for 6" Oval Peterson Trailer Lights - Flush Mount Part Number: B421-18
    In stock

    Flush mount 6" oval trailer light using the black PVC grommet. Provides additional shock absorption to extend the light's life.

  1. Right Angle 3-PIN Plug
    $2.49 ea.
    Right Angle 3-Wire Pigtail for Trailer Lights - 3-Pin PL-3 Plug - 10" Lead Part Number: PL-3R
    In stock
    Designed for ST, PT, and RT series truck lights and trailer lights, the right angle 3-pin plug features 10 inch wires allowing for easy installation.
  2. Straight 3-PIN Plug
    $2.49 ea.
    3-Wire Pigtail for Trailer Lights - 3-Pin PL-3 Plug - 10" Lead Part Number: PL-3S
    In stock
    Designed for ST, PT, and RT series truck lights and trailer lights, the straight 3-pin plug features 10 inch wires allowing for easy installation.
  3. Right Angle 3-Wire Pigtail for Optronics Trailer Lights - 3-Pin PL-3 Plug - 10" Long
    $4.49 ea.
    Right Angle 3-Wire Pigtail for Optronics Trailer Lights - 3-Pin PL-3 Plug - 10" Long Part Number: A47PB
    In stock

    To connect an LED truck and trailer lights with a PL-3 connector to power, use the 3-wire pigtail connector. 10" right angle pigtail wire leads with stripped ends.

  4. 3-Wire Pigtail for Optronics Trailer Lights - 3-Pin PL-3 Plug - 10" Long
    $3.99 ea.
    3-Wire Pigtail for Optronics Trailer Lights - 3-Pin PL-3 Plug - 10" Long Part Number: A45PB
    In stock

    To connect an LED truck and trailer lights with a PL-3 connector to power, use the 3-wire pigtail connector. 10" straight pigtail wire leads with stripped ends.

  5. 3-Wire Pigtail for Peterson Trailer Lights - 3 Pin PL-3 Plug - 10-1/2" Long
    $4.49 ea.
    3-Wire Pigtail for Peterson Trailer Lights - 3 Pin PL-3 Plug - 10-1/2" Long Part Number: B431-491
    In stock

    Hardwire LED truck and trailer lights to power using the 3-wire PL-3 pigtail harness. Stripped hot wires and ground wire with ring terminal. Molded plug for single or double contact.

  6. Right Angle 3-Wire Pigtail for Peterson Trailer Lights - 3 Pin PL-3 Plug - 10-1/2" Long
    $4.99 ea.
    Right Angle 3-Wire Pigtail for Peterson Trailer Lights - 3 Pin PL-3 Plug - 10-1/2" Long Part Number: B421-491
    In stock

    Hardwire LED truck and trailer lights to power using the 3-wire PL-3 pigtail harness. Stripped hot wires and ground wire with ring terminal. Right angle plug for single or double contact.

  1. PT series Mounting Grommet
    $3.99 ea.
    6-1/2" Oval Grommet for Trailer Lights Part Number: GR-65
    In stock
    Designed for 6 1/2 inch oval PT series trailer lights and truck lights, the grommet allows for recessed mounting of LED lights and requires a 6.76" x 2.5" hole.
  2. PT series Mounting Bracket
    $6.49 ea.
    Mounting Bracket for 6-1/2" Oval Trailer Lights - Steel - Black Part Number: PT-BRKT
    In stock
    Constructed of durable steel, the 6.5 inch oval bracket is designed for PT series trailer lights and truck lights and allows for easy installation on common commercial or non-commercial trailers. Grommet sold separately.
  3. PT series Chrome Bezel with Hood
    $4.49 ea.
    Chrome Bezel with Visor for 6-1/2" Oval Trailer Lights Part Number: KC-65
    In stock
    Chrome plated plastic bezel with Hood Visor for 6.5 Inch Oval PT Series Truck Lights. Includes stainless steel mounting screws. Price for each.
  1. PT series Mounting Grommet
    $3.99 ea.
    6-1/2" Oval Grommet for Trailer Lights Part Number: GR-65
    In stock
    Designed for 6 1/2 inch oval PT series trailer lights and truck lights, the grommet allows for recessed mounting of LED lights and requires a 6.76" x 2.5" hole.
  2. PT series Mounting Bracket
    $6.49 ea.
    Mounting Bracket for 6-1/2" Oval Trailer Lights - Steel - Black Part Number: PT-BRKT
    In stock
    Constructed of durable steel, the 6.5 inch oval bracket is designed for PT series trailer lights and truck lights and allows for easy installation on common commercial or non-commercial trailers. Grommet sold separately.

Reviews

4.6 / 5 stars
9 reviews

Write Your Own Review

Write a Review

You're reviewing: LED Trailer Turn Signal Light - Sequential Arrow - 35 LEDs - Oval - Amber - 12V / 24V

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

  • Review text does not pertain to the product
  • Abusive and offensive language
  • Photos are not related to the reviewed product
  • Any violation of laws and/or copyrighted material
  • Unrelated hyperlinks/URLs

Save 10% on all orders by joining our mailing list
Get top deals, latest products, and more.