Brake Light Strobe Module

Brake Light Strobe Module - Brake Light Strobe Module

Part Number
FL2S-10A

Discontinued

We have discontinued this product permanently. Please find suggested replacement products from below section.

Black Friday Sale: 15% Off Your Entire Purchase! When you use code BFCM22 at checkout. Details⇒

Overview

Weatherproof strobe module flashes brake bulbs at 10Hz for 2 seconds. After 2 seconds the lights remain lit until the break pedal is released. Used with LED brake & reverse lights only. 10 Amp maximum load.
3 Years
3 Years
Super Bright LEDs, Inc. offers a 3-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a product of equal value may be substituted or a gift card for the value of the product. Read More

Specifications

IP Rating IP65
Print Specifications
installation

Accessories & Power Supplies

  1. 3156/3157 Wedge Base Sockets - Wired

    $4.99 ea.
    3156/3157 Wedge Base Sockets - Wired Part Number: 315x-SW
    In stock
    Replacement 3156 or 3157 sockets accept 16-mm wedge base bulbs. Socket fits single-contact 3156 bulbs or dual-contact dual-filament 3157 bulbs. Durable construction with 6” power wires. Price per socket.
  2. BA15 Bayonet Base Sockets - Wired

    $1.99 ea.
    BA15 Bayonet Base Sockets - Wired Part Number: BA15x-SW2
    In stock
    Replacement BA15 sockets accept 15-mm bayonet base bulbs. Socket fits single-contact (BA15S) 1156 bulbs or dual-contact dual-filament (BAY15D) 1157 bulbs. Durable construction with 4-1/2” power wires. Price per socket.
  3. FL3-RED LED Bulb Electronic Flasher

    $13.99 ea.

    FL3-RED LED Bulb Electronic Flasher - 3 Pin Red American Flasher Part Number: FL3-RED-K
    In stock
    Pin Diagram
    FL3-RED-K Pin Diagram
    Legend
    • L = Load
    • + = 12V IN
    • P = Pilot Light Output
    Description

    Electronic LED Flasher Relays have no minimum load-12VDC. Eliminates the need for load resistors, turn signals will flash at normal rate with or with out LED bulbs.

  4. BA15 Bayonet Base Sockets - Wired

    $1.99 ea.
    BA15 Bayonet Base Sockets - Wired Part Number: BA15x-SW
    In stock
    Replacement BA15 sockets accept 15-mm bayonet base bulbs. Socket fits single-contact single-filament (BA15S) 1156 bulbs, dual-contact dual-filament (BAY15D) 1157 bulbs or dual-contact single-filament (BA15D) 1142 bulbs. Durable construction with 6” power wires. Mounting holes (spaced 1-1/4” apart) let you secure the socket in place. Price per socket.
  5. FL2-RED LED Bulb Electronic Flasher

    $13.99 ea.

    FL2-RED LED Bulb Electronic Flasher - 2 Pin Red American Flasher and Bracket Part Number: FL2-RED-K
    In stock
    Pin Diagram
    FL2-RED-K Pin Diagram
    Legend
    • L = Load
    • + = 12V IN
    Description

    Electronic LED Flasher Relays have no minimum load-12VDC. Eliminates the need for load resistors, turn signals will flash at normal rate with or with out LED bulbs.

  6. View all

    All Accessories

    1 additional compatible accessories

  1. FL3-RED LED Bulb Electronic Flasher

    $13.99 ea.

    FL3-RED LED Bulb Electronic Flasher - 3 Pin Red American Flasher Part Number: FL3-RED-K
    In stock
    Pin Diagram
    FL3-RED-K Pin Diagram
    Legend
    • L = Load
    • + = 12V IN
    • P = Pilot Light Output
    Description

    Electronic LED Flasher Relays have no minimum load-12VDC. Eliminates the need for load resistors, turn signals will flash at normal rate with or with out LED bulbs.

  2. FL2-RED LED Bulb Electronic Flasher

    $13.99 ea.

    FL2-RED LED Bulb Electronic Flasher - 2 Pin Red American Flasher and Bracket Part Number: FL2-RED-K
    In stock
    Pin Diagram
    FL2-RED-K Pin Diagram
    Legend
    • L = Load
    • + = 12V IN
    Description

    Electronic LED Flasher Relays have no minimum load-12VDC. Eliminates the need for load resistors, turn signals will flash at normal rate with or with out LED bulbs.

  1. LED Marker Lamp Load Resistor Kit - Sidemarker LED Light Hyperflashing & Warning Fix

    $3.99 ea.

    LED Marker Lamp Load Resistor Kit - Sidemarker LED Light Warning Fix - 25W LED Marker Lamp Load Resistor Kit Part Number: RL-2525-K
    In stock
    25 Ohm, 25 Watt load resistor kit for mini wedge base bulbs or any sidemarker LED lights. Connect one across each LED marker light to resolve bulb-out warning indicator problems.

    View Installation Diagram & Instructions [PDF]

    Mount the resistor away from painted surfaces, plastic, or other components that may be damaged by the heat generated by the resistor.
  2. LED Light Load Resistor Kit - LED Turn Signal Hyper Flash & Warning Fix

    $4.99 ea.
    LED Light Load Resistor Kit - LED Turn Signal Hyper Flash & Warning Fix Part Number: RL-650-K-C
    In stock
    6 Ohm, 50 Watt load resistor kit. Solves common LED turn signal problems with hyperflashing and bulb out warning indicators. Connect one across each LED turn signal bulb to simulate filament Tail/Turn signal bulbs.

    View Installation Diagram & Instructions [PDF]. Mount the resistor away from painted surfaces, plastic, or other components that may be damaged by the heat generated by the resistor.
  1. 3156/3157 Wedge Base Sockets - Wired

    $4.99 ea.
    3156/3157 Wedge Base Sockets - Wired Part Number: 315x-SW
    In stock
    Replacement 3156 or 3157 sockets accept 16-mm wedge base bulbs. Socket fits single-contact 3156 bulbs or dual-contact dual-filament 3157 bulbs. Durable construction with 6” power wires. Price per socket.
  2. BA15 Bayonet Base Sockets - Wired

    $1.99 ea.
    BA15 Bayonet Base Sockets - Wired Part Number: BA15x-SW2
    In stock
    Replacement BA15 sockets accept 15-mm bayonet base bulbs. Socket fits single-contact (BA15S) 1156 bulbs or dual-contact dual-filament (BAY15D) 1157 bulbs. Durable construction with 4-1/2” power wires. Price per socket.
  3. BA15 Bayonet Base Sockets - Wired

    $1.99 ea.
    BA15 Bayonet Base Sockets - Wired Part Number: BA15x-SW
    In stock
    Replacement BA15 sockets accept 15-mm bayonet base bulbs. Socket fits single-contact single-filament (BA15S) 1156 bulbs, dual-contact dual-filament (BAY15D) 1157 bulbs or dual-contact single-filament (BA15D) 1142 bulbs. Durable construction with 6” power wires. Mounting holes (spaced 1-1/4” apart) let you secure the socket in place. Price per socket.
  4. 744x Base Wired Sockets

    $3.99 ea.
    744x Base Wired Sockets Part Number: 744x-SW
    In stock
    Single Intensity (7440-SW) for 7440 bulbs. Dual Contact Dual Intensity (7443-SW) for 7443 bulbs. 5 inch long power wires.

Reviews

Write Your Own Review

Write a Review

You're reviewing: Brake Light Strobe Module - Brake Light Strobe Module

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

  • Review text does not pertain to the product
  • Abusive and offensive language
  • Photos are not related to the reviewed product
  • Any violation of laws and/or copyrighted material
  • Unrelated hyperlinks/URLs