Need help? Contact us.

Toggle Nav
Search
My Cart 0
Top
Shop By Category
Account
Site Tools
Back
LED Switching Power Supply - DiodeDrive® Series - 240W Enclosed Power Supply - 24V

LED Switching Power Supply - DiodeDrive® Series - 60W-240W Enclosed Power Supply - 24V

Part Number
CVPS-xWH-24V

Features

  • DiodeDrive Class 2 power supply
  • Universal AC input; single, dual, or quadruple output
  • Protected against short circuit, overload, and over voltage
  • IP68 rated waterproof housing
  • UL Recognized, 7 year warranty
View more details
In Stock

$33.99 ea.
Add to Wish List Compare
Share:
main product photo
11 photos

Overview

DiodeDrive Class 2 switching power supply is fully enclosed with a heavy duty case to with stand water and debris for a long lifespan. Guaranteed with a 7 year warranty, the reliable device is designed for constant voltage operation. Widely applicable, use it to power LED lights inside or outside with out energy waste or risk of circuit overload.
Product Details:
  • Class 2 switching power supply; no FG
  • Designed for constant voltage operation
  • Single, dual, or quadruple output at 240W
  • Waterproof IP68
  • Wide voltage input; 100-277 VAC
  • UL Recognized
  • 7 year warranty
UL Recognized
UL Recognized
CE
CE
7 Years
7 Years
Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Recognized label ensures that a product component, such as a power supply or LED light strip, has been tested and verified as safe to use in a UL-Listed product. UL-Listed product samples are tested by UL and meet their Standards for Safety requirements.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
Super Bright LEDs, Inc. offers a 7-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More

Applications

  • LED Electronic Displays
  • Stage & Theaters
  • Architectural Lighting
  • Sign Lighting
  • Strip Lights

Specifications

Built-in PFC Function No
Certifications/Compliance CE, Class 2, UL Recognized
Dimmable No
Environmental Rating Suitable for Wet Locations, Waterproof
Input Frequency Range 50 ~ 60 Hz
Input Voltage Pigtail
IP Rating IP68
Output Voltage 24 VDC
Print Specifications
Swipe left to see additional specifications
Part NO Ambient Operating Temperature Range Output Channel Type Output Current Output Power
CVPS-100WH-24V-416 -40~+60 °C (-40~+140 °F) 1 4.16A (4160mA) 100 Watts
CVPS-100WH-24V-416(POWERCORD) -40~+60 °C (-40~+140 °F) 1 4.16A (4160mA) 100 Watts
CVPS-150WH-24V-624 -40~+50 °C (-40~+122 °F) 2 6.24A (6240mA) 150 Watts
CVPS-150WH-24V-624(POWERCORD) -40~+50 °C (-40~+122 °F) 2 6.24A (6240mA) 150 Watts
CVPS-240WH-24V-1000 -40~+50 °C (-40~+122 °F) 4 10.0A (10000mA) 240 Watts
CVPS-240WH-24V-1000(POWERCORD) -40~+50 °C (-40~+122 °F) 4 10.0A (10000mA) 240 Watts
CVPS-60WH-24V-250 -40~+60 °C (-40~+140 °F) 1 2.5A (2500mA) 60 Watts
CVPS-60WH-24V-250(POWERCORD) -40~+60 °C (-40~+140 °F) 1 2.5A (2500mA) 60 Watts

All specifications are subject to change without notice. All products are RoHS compliant.

Documents
CVPS_240W Specification Sheet
CVPS H-Series Specification Sheet

Accessories & Power Supplies

All Accessories
Installation Supplies
Powercord

Accessories Links

Accessory Category
  1. Power Cord for Power Supplies
    $7.99 ea.
    Power Cord for Power Supplies - Power Cord for Power Supplies Part Number: _POWERCORD
    In stock
    Standard grounded power cord for plugging power supplies into standard 115VAC receptacle. 18 gauge, SJT type 3 conductor, 6 foot length.
  2. 3M-FTP Double-Sided Foam Pad
    $0.35 ea.
    3M-FTP Double-Sided Foam Pad - Double-Sided Foam Pad Part Number: 3M-FTP
    In stock
    High performance 3M Closed-Cell Acrylic Foam Tape Pads - adhesive on both sides for attaching light bars and other LED products to a wide variety of surfaces. Measures 1.25 x 0.625in, 0.088in thick.
  3. 22-16 AWG Grey 3M Twist-On Wire Connector
    $0.09 ea.
    22-16 AWG Grey 3M Twist-On Wire Connector Part Number: WN-2216
    In stock
    Use these 3M 22-16 AWG grey wire connector for closed-end connections and secure splices. The UL-Listed twist-on wire connectors tighten with out ratcheting and feature a deep skirt to prevent bare wire from being exposed.
  4. 3M Automotive Adhesion Promoter
    $4.99 ea.
    3M Adhesion Promoter - Single Pack Part Number: 06396
    In stock
    3M Adhesion Promoter 06396 is a liquid primer used for enhancing adhesion of 3M Acrylic Foam Tapes for interior and exterior trim applications. 3M Adhesion Promoter 06396 is specifically formulated for automotive applications. It comes in an easy-to-use sponge applicator packet. The liquid contents of the packet should be completely used as soon as possible after opening. Apply promoter only to areas that will be fully covered with tape. The primer should be dry before applying tape. For best results, apply tape immediately after primer application or no more than one hour after primer application. Be sure the primed surfaces remain free from contaminants prior to tape application.
  5. 515PV Straight Blade Plug - 15 Amp - 125 Volt
    $5.99 ea.
    515PV Straight Blade Plug - 515PV Part Number: 515PV
    In stock
    This 3-prong straight blade plug (515PV) is ideal for creating a grounded plug-in option for lights that use 18-AWG to 12-AWG wire. The 15-amp (max), 125-volt (max) plug is constructed of durable PVC, and its backwire clamps are designed to fit tightly around 3-conductor stripped wire.
  1. 3M-FTP Double-Sided Foam Pad
    $0.35 ea.
    3M-FTP Double-Sided Foam Pad - Double-Sided Foam Pad Part Number: 3M-FTP
    In stock
    High performance 3M Closed-Cell Acrylic Foam Tape Pads - adhesive on both sides for attaching light bars and other LED products to a wide variety of surfaces. Measures 1.25 x 0.625in, 0.088in thick.
  2. 22-16 AWG Grey 3M Twist-On Wire Connector
    $0.09 ea.
    22-16 AWG Grey 3M Twist-On Wire Connector Part Number: WN-2216
    In stock
    Use these 3M 22-16 AWG grey wire connector for closed-end connections and secure splices. The UL-Listed twist-on wire connectors tighten with out ratcheting and feature a deep skirt to prevent bare wire from being exposed.
  3. 3M Automotive Adhesion Promoter
    $4.99 ea.
    3M Adhesion Promoter - Single Pack Part Number: 06396
    In stock
    3M Adhesion Promoter 06396 is a liquid primer used for enhancing adhesion of 3M Acrylic Foam Tapes for interior and exterior trim applications. 3M Adhesion Promoter 06396 is specifically formulated for automotive applications. It comes in an easy-to-use sponge applicator packet. The liquid contents of the packet should be completely used as soon as possible after opening. Apply promoter only to areas that will be fully covered with tape. The primer should be dry before applying tape. For best results, apply tape immediately after primer application or no more than one hour after primer application. Be sure the primed surfaces remain free from contaminants prior to tape application.
  4. 515PV Straight Blade Plug - 15 Amp - 125 Volt
    $5.99 ea.
    515PV Straight Blade Plug - 515PV Part Number: 515PV
    In stock
    This 3-prong straight blade plug (515PV) is ideal for creating a grounded plug-in option for lights that use 18-AWG to 12-AWG wire. The 15-amp (max), 125-volt (max) plug is constructed of durable PVC, and its backwire clamps are designed to fit tightly around 3-conductor stripped wire.
  1. Power Cord for Power Supplies
    $7.99 ea.
    Power Cord for Power Supplies - Power Cord for Power Supplies Part Number: _POWERCORD
    In stock
    Standard grounded power cord for plugging power supplies into standard 115VAC receptacle. 18 gauge, SJT type 3 conductor, 6 foot length.

Reviews

2.7 / 5 stars
3 reviews

Write Your Own Review

Write a Review

You're reviewing: LED Switching Power Supply - DiodeDrive® Series - 60W-240W Enclosed Power Supply - 24V

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

  • Review text does not pertain to the product
  • Abusive and offensive language
  • Photos are not related to the reviewed product
  • Any violation of laws and/or copyrighted material
  • Unrelated hyperlinks/URLs