Fuses & Wire Connectors

Selection of wire terminations including splice taps, butt connectors, wire nuts, and push on connectors for low voltage LED lighting installations in and around the house or vehicle. Mini-Automotive Blade Fuses, Circuit Protection Fuse Tap, Easy-Crimp Fuse Holder, and Waterproof Fuse Holder for automotive aftermarket LED lighting installations.

10 of 71 Results
of 8
Show Details
Connection Type
Screw Terminals, CPS Female, CPS Male
Type
Power Adapter, CPS Compatible
CPS-x2ST standard 5.5mm male or female barrel connector to screw terminal adapter. CPS-F2ST adapter allows products with pigtail power connections to be powered by CPS series power supplies.
In Stock
$1.95 ea.
Volume price as low as $1.46
$1.95 ea.
  • Part Number:
View More Information
Make Your Selections
Show Details
Connection Type
N/A
Type
Connectors
These dual-conductor quick wire connectors are perfect for connections that need to be assembled and reassembled into different configurations. Connectors are designed with interlocking ends and easily snap together. The non-weatherproof, insulated wire splice connectors are designed for 22-18 gauge wire and have a secure snap closure to hold wires in place; there's no need to strip wire insulation. Each connector is rated for 6 Amps at 36VDC or 25 VAC. Price per pair. Also available in a 3-connector kit with Y splitter.

Note: Use pliers to close connector after wires are inserted.

Some 18-gauge wire has extra insulation; for best results, strip back the wire before inserting it into the wire splice connector.
In Stock
$1.29 ea.
Volume price as low as $0.97
Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
$1.29 ea.
  • Part Number:
View More Information
Make Your Selections
Show Details
Connection Type
16 to 14 Gauge Wire
Type
Connectors
Use this female bullet connector to quickly connect and disconnect 16-14 AWG wire. The fully insulated terminal is made of clear nylon to easily inspect connections. This terminal mates with 16-14 AWG and 22-18 AWG male bullet connectors.
In Stock
$0.09 ea.
Volume price as low as $0.07
$0.09 ea.
  • Part Number:
View More Information
Make Your Selections
Show Details
Connection Type
16 to 14 Gauge Wire
Type
Connectors
Use this male bullet connector to quickly connect and disconnect 16-14 AWG wire. The fully insulated terminal is made of clear nylon to easily inspect connections. This terminal mates with 16-14 AWG and 22-18 AWG female bullet connectors.
In Stock
$0.09 ea.
Volume price as low as $0.07
$0.09 ea.
  • Part Number:
View More Information
Make Your Selections
Show Details
Connection Type
N/A
Type
Connectors, Splitter Cable
These dual-conductor quick wire connectors are perfect for connections that need to be assembled and reassembled into different configurations. Connectors are designed with interlocking ends and easily snap together or into the included Y splitter. The kit includes 3 wire splice connectors, Y splitter, and a double-sided 3M adhesive pad. The non-weatherproof, insulated wire splice connectors are designed for 22-18 gauge wire and have a secure snap closure to hold wires in place; there's no need to strip wire insulation. Each connector is rated for 6 Amps at 36VDC or 25 VAC. If both outputs are being used on the Y splitter, connectors can handle 3 amps each. Connectors are also sold as a pair.

Note: Use pliers to close connector after wires are inserted.

Some 18-gauge wire has extra insulation; for best results, strip back the wire before inserting it into the wire splice connector.
In Stock
$4.95 ea.
Volume price as low as $3.71
Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
$4.95 ea.
  • Part Number:
View More Information
Make Your Selections
Show Details
Connection Type
Solderless
Type
Push On Connector
Use this 54" interconnect cable to join 4' Linkable LED Shop Light/Garage Lights (maximum run not to exceed 10 fixtures). The interconnect cable provides a clean look with less space between lights than the fixture's included 5.25' cable.
In Stock
$2.95 ea.
$2.95 ea.
  • Part Number:
View More Information
Make Your Selections
Show Details
Connection Type
22 to 18 Gauge Wire
Type
Connectors
Use this female bullet connector to quickly connect and disconnect 22-18 AWG wire. The fully insulated terminal is made of clear nylon to easily inspect connections. This terminal mates with 22-18 AWG and 16-14 AWG male bullet connectors.
In Stock
$0.09 ea.
Volume price as low as $0.07
$0.09 ea.
  • Part Number:
View More Information
Make Your Selections
Show Details
Connection Type
22 to 18 Gauge Wire
Type
Connectors
Use this male bullet connector to quickly connect and disconnect 22-18 AWG wire. The insulated terminal is made of clear nylon to easily inspect connections. This terminal mates with 22-18 AWG and 16-14 AWG female bullet connectors.
In Stock
$0.09 ea.
Volume price as low as $0.07
$0.09 ea.
  • Part Number:
View More Information
Make Your Selections
Show Details
Connection Type
Solderless
Type
Push On Connector
Use this 9.5" interconnect cable to join 4' Linkable LED Shop Light/Garage Lights (maximum run not to exceed 10 fixtures). The interconnect cable provides a clean look with less space between lights than the fixture's included 5.25' cable.
In Stock
$1.49 ea.
$1.49 ea.
  • Part Number:
View More Information
Make Your Selections
Show Details
Connection Type
N/A
Type
Wire Nut
Use these 18-16 AWG orange wire nuts for closed-end connections and secure splices. The twist-on wire connectors tighten without ratcheting and feature a deep skirt to prevent bare wire from being exposed. These wire nuts can be removed and reused.
In Stock
$0.04 ea.
Volume price as low as $0.03
$0.04 ea.
  • Part Number:
View More Information
Make Your Selections
10 of 71 Results
of 8

Related Categories

Send us your Feedback