Refine Results

Connector Type

LED Rectangular Tail Lamps

4 of 4 Results
of 1
Show Details
Available LED Colors
Brightness
77 lm
LED Quantity
24 LEDs
Connector Type
3-Pin
Mount Type
Grommet

Dimensions: 13.475cm(5.31") x 4.85cm(1.91") x 8.7cm(3.43")

Designed to accept industry standard 3-pin plugs, this 5” dual-intensity rectangle LED light meets DOT FMVSS 108 requirements for use as tail lights, turn signal lights, hazard lights, brake lights, reverse lights or back-up lights, and parking lights. The light mounts flush with a compatible grommet (sold separately). Each light boasts 24 high flux LEDs that operate within a wide 9-14.8V DC range that consumes 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. The truck/trailer lights are available in white, amber, or red. Lifetime warranty on all truck/trailer lights. Dimensions: 5.31”(13.475cm) x 1.91”(4.85cm) x 3.43”(8.7cm)
Show More
In Stock
Starting at $16.95 ea.
Qty Price Ea.
25 $16.10 to $26.55
50 $15.25 to $25.15
100 $13.56 to $22.36
500 $12.71 to $20.96
1000+ $11.87 to $19.57
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
An SAE mark means that the Society of Automotive Engineers has tested a product to ensure that it follows guidelines, standards, and practices in regard to design, construction, and materials. SAE's requirements do not guarantee that the product will be street legal. The product must be approved by the Department of Transportation (DOT) before it is considered legal for street use.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

Starting at $16.95 ea.
  • Part Number:
View More Information
Make Your Selections
Select LED Color :
Amber Red White
2.
Show Details
Available LED Colors
Brightness
35 lm
LED Quantity
20 LEDs
Connector Type
3-Pin
Mount Type
Flange

Dimensions: 15.494cm(6.10") x 10.922cm(4.30") x 3.556cm(1.40")

Designed to accept industry standard 3-pin plugs, this 6” rectangular LED light meets DOT FMVSS 108 requirements for use as reverse lights or back-up lights, turn signal lights, hazard lights, parking lights, and tail lights. The light features a built-in stainless steel flange for mounting. Each light boasts 20 high-flux LEDs that operate within a wide 9-14.8V DC range and consumes 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. The truck/trailer lights are available in white, amber, and red. Lifetime warranty on all truck/trailer lights. Dimensions: 6.1”(15.494cm) x 4.3”(10.922cm) x 1.4”(3.556cm)
Show More
In Stock
Starting at $20.95 ea.
Qty Price Ea.
25 $19.90 to $28.45
50 $18.85 to $26.95
100 $16.76 to $23.96
500 $15.71 to $22.46
1000+ $14.67 to $20.97
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

Starting at $20.95 ea.
  • Part Number:
View More Information
Make Your Selections
Select LED Color :
Amber Red White
Show Details
Available LED Colors
Brightness
42 lm
LED Quantity
30 LEDs
Connector Type
Pigtail
Mount Type
Surface

Dimensions: 16.51cm(6.50") x 2.489cm(0.98") x 16.027cm(6.31")

This 6-1/2” square LED light meets DOT FMVSS 108 requirements and is designed for use as a rear reflex reflector, turn signal lights, hazard warning lights, parking lights, reverse lights or back-up lights, brake lights, and tail lights. The light features a rubber mounting gasket and 9-1/2” power wires for simple surface mounting and installation. Each light boasts 30 high-flux LEDs that operate within a wide 9-14.8V DC range and consumes 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. The truck/trailer lights are available in red, white, or amber. Lifetime warranty on all truck/trailer lights. Dimensions: 6.5”(16.51cm) x 0.98”(2.489cm) x 6.31”(16.027cm)
Show More
In Stock
Starting at $29.95 ea.
Qty Price Ea.
25 $28.45 to $37.95
50 $26.95 to $35.95
100 $23.96 to $31.96
500 $22.46 to $29.96
1000+ $20.97 to $27.97
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
An SAE mark means that the Society of Automotive Engineers has tested a product to ensure that it follows guidelines, standards, and practices in regard to design, construction, and materials. SAE's requirements do not guarantee that the product will be street legal. The product must be approved by the Department of Transportation (DOT) before it is considered legal for street use.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

Starting at $29.95 ea.
  • Part Number:
View More Information
Make Your Selections
Select LED Color :
Amber Red White
Show Details
LED Color
Colors
Amber
LED Quantity
16 LEDs
Connector Type
3-Pin
Mount Type
Grommet

Dimensions: 13.411cm(5.28") x 5.817cm(2.29") x 8.636cm(3.40")

Designed to accept industry standard 3-pin plugs, this 5” rectangle LED light meets DOT FMVSS 108 requirements for use as parking lights, turn signal lights, brake lights, reverse lights or back-up lights, and tail lights. Mounts flush with compatible grommet (sold separately). Each light boasts 16 high-flux LEDs that operate within a wide 9-14.8V DC range and consumes 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. The truck/trailer lights are available in amber, red, and white. Lifetime warranty on all truck/trailer lights. Dimensions: 5.28”(13.411cm) x 2.29”(5.817cm) x 3.4”(8.636cm)
Show More
In Stock (Clearance)
Was $16.95
Now $11.88 ea.
Qty Price Ea.
25 $11.29
50 $10.69
100 $9.50
500 $8.91
1000+ $8.32
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
An SAE mark means that the Society of Automotive Engineers has tested a product to ensure that it follows guidelines, standards, and practices in regard to design, construction, and materials. SAE's requirements do not guarantee that the product will be street legal. The product must be approved by the Department of Transportation (DOT) before it is considered legal for street use.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

Was $16.95
Now $11.88 ea.
  • Part Number:
View More Information
Make Your Selections

Are you having trouble finding something?

Let us know what you were searching for or make a suggestion to help improve our search and product selection.

4 of 4 Results
of 1

Send us your Feedback