Refine Results

Connector Type

LED Oval Tail Lamps

10 of 13 Results
of 2
Show Details
Available LED Colors
Brightness
450 lm
LED Quantity
10 LEDs
Connector Type
3-Pin
Mount Type
Flange, Bracket, Grommet

Dimensions: 16.32cm(6.43") x 5.817cm(2.29") x 4.354cm(1.71")

Designed to accept industry standard 3-pin plugs, this 6” oval LED light meets DOT FMVSS 108 requirements for use as reverse lights or back-up lights, parking lights, turn signal lights, hazard warning lights, brake lights, and tail lights. The light mounts flush with a compatible grommet, bezel, or flange. Each light boasts 10 LEDs that operate within a wide 9-14.8V DC range and consumes 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. The truck/trailer lights are available in red, amber, or white. Lifetime warranty on all truck/trailer lights. Also see similar clear-lens version.
Show More
In Stock
Starting at $11.95 ea.
Volume price as low as $8.96
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
An SAE mark means that the Society of Automotive Engineers has tested a product to ensure that it follows guidelines, standards, and practices in regard to design, construction, and materials. SAE's requirements do not guarantee that the product will be street legal. The product must be approved by the Department of Transportation (DOT) before it is considered legal for street use.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

Starting at $11.95 ea.
  • Part Number:
View More Information
Make Your Selections
Select LED Color :
Amber Red White
Show Details
Available LED Colors
Brightness
75 lm
LED Quantity
10 LEDs
Connector Type
Pigtail
Mount Type
Surface

Dimensions: 20.32cm(8.00") x 9.525cm(3.75") x 2.54cm(1.00")

This 6” oval LED light meets DOT FMVSS 108 requirements for use as parking lights, turn signal lights, reverse lights, and hazard lights. Designed to be surface mounted (screws not included), the light features a chrome bezel. Each light boasts 10 high-flux LEDs, operates within a wide 9-14.8V DC range, and consumes 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. The truck/trailer lights are available in single-intensity white for reverse lights, dual-intensity amber for marker or turn signal functions, or dual-intensity red that brightens when brakes are applied. Lifetime warranty on all truck/trailer lights.
Show More
In Stock
Starting at $14.95 ea.
Volume price as low as $11.21
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
An SAE mark means that the Society of Automotive Engineers has tested a product to ensure that it follows guidelines, standards, and practices in regard to design, construction, and materials. SAE's requirements do not guarantee that the product will be street legal. The product must be approved by the Department of Transportation (DOT) before it is considered legal for street use.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

Starting at $14.95 ea.
  • Part Number:
View More Information
Make Your Selections
Select LED Color :
Amber Red White
Show Details
Available LED Colors
LED Quantity
56 LEDs
Connector Type
3-Pin
Mount Type
Flange

Dimensions: 19.164cm(7.54") x 3.899cm(1.54") x 8.255cm(3.25")

Designed to accept industry standard 3-pin plugs, this 6” oval LED light meets DOT FMVSS 108 requirements for use as tail lights, turn signal lights, hazard lights, brake lights, and parking lights. The light mounts flush with a built-in, 4-hole flange available in black PVC or chrome-plated finish. Each light boasts 56 LEDs that operate within a wide 9-14.8V DC range and consumes 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. Lifetime warranty on all truck/trailer lights.
Show More
In Stock
Starting at $16.88 ea.
Volume price as low as $12.66
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
An SAE mark means that the Society of Automotive Engineers has tested a product to ensure that it follows guidelines, standards, and practices in regard to design, construction, and materials. SAE's requirements do not guarantee that the product will be street legal. The product must be approved by the Department of Transportation (DOT) before it is considered legal for street use.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

Starting at $16.88 ea.
  • Part Number:
View More Information
Make Your Selections
Select Finish :
Black Chrome
Select LED Color :
Amber Red
Show Details
Available LED Colors
LED Quantity
24 LEDs
Connector Type
3-Pin
Mount Type
Flange, Bracket, Grommet

Dimensions: 16.447cm(6.48") x 4.61cm(1.81") x 5.677cm(2.24")

Designed to accept industry standard 3-pin plugs, this 6” oval LED light meets DOT FMVSS 108 requirements for use as parking lights, turn signal lights, brake lights, or tail lights. Mounts flush with compatible grommet or mounting bracket. Each light boasts 24 high-flux LEDs that operate within a wide 9-14.8 VDC range and consumes 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. The truck/trailer lights are available in red or amber. Lifetime warranty on all truck/trailer lights.
Show More
In Stock
Was $18.95
Now $16.95 ea.
Volume price as low as $12.71
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
Was $18.95
Now $16.95 ea.
  • Part Number:
View More Information
Make Your Selections
Select LED Color :
Amber Red
5.
Show Details
Available LED Colors
LED Quantity
24 LEDs
Connector Type
3-Pin
Mount Type
Surface, Flange, Grommet

Dimensions: 16.4cm(6.46") x 4.3cm(1.69") x 5.7cm(2.24")

Designed to accept industry standard 3-pin plugs, this 6” oval LED strobe light meets DOT FMVSS 108 requirements for use as directional warning lights and hazard lights. The light features both steady-on and pulsing strobe modes and mounts flush with a compatible grommet, bezel, flange, or mounting bracket. Each light boasts 24 high flux LEDs that operate within a wide 9-36V DC range and consumes 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. Available in amber or red color. Lifetime warranty on all truck/trailer lights.
Show More
In Stock
$24.95 ea.
Volume price as low as $18.71
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
$24.95 ea.
  • Part Number:
View More Information
Make Your Selections
Select LED Color :
Amber Red
Show Details
LED Color
Colors
Amber
LED Quantity
9 LEDs
Connector Type
3-Pin
Mount Type
Bracket, Grommet

Dimensions: 16.472cm(6.49") x 6.96cm(2.74") x 5.893cm(2.32")

Designed to accept industry standard 3-pin plugs, this 6” oval LED light meets DOT FMVSS 108 requirements for use as mid turn signal lights, side reflectors, and side marker lights. Mounts flush with compatible grommet, bezel, or flange. Each light boasts 9 high-flux LEDs that operate within a wide 9-14.8V DC range and consumes 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. The truck/trailer lights are available in amber color. Lifetime warranty on all truck/trailer lights. Dimensions: 6.49”(16.472cm) x 2.75”(6.96cm) x 2.32”(5.893cm)
Show More
In Stock
$14.95 ea.
Volume price as low as $11.21
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
An SAE mark means that the Society of Automotive Engineers has tested a product to ensure that it follows guidelines, standards, and practices in regard to design, construction, and materials. SAE's requirements do not guarantee that the product will be street legal. The product must be approved by the Department of Transportation (DOT) before it is considered legal for street use.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$14.95 ea.
  • Part Number:
View More Information
Make Your Selections
Show Details
LED Color
Colors
Red
LED Quantity
10 LEDs
Connector Type
3-Pin
Mount Type
Flange, Bracket, Grommet

Dimensions: 16.256cm(6.40") x 5.588cm(2.20") x 3.81cm(1.50")

Designed to accept industry standard 3-pin plugs, this 6” oval LED light meets DOT FMVSS 108 requirements for use as parking lights, brake lights, turn signal lights, and tail lights. Mounts flush with compatible grommet, bezel, or mounting bracket (sold separately). Each light boasts 10 high-flux LEDs that operate within a wide 9-14.8V DC range and consumes 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. The truck/trailer lights are available in red. Dimensions: 6.4”(16.256cm) x 2.2”(5.588cm) x 1.5”(3.81cm)
Show More
In Stock
$9.95 ea.
Volume price as low as $7.46
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
An SAE mark means that the Society of Automotive Engineers has tested a product to ensure that it follows guidelines, standards, and practices in regard to design, construction, and materials. SAE's requirements do not guarantee that the product will be street legal. The product must be approved by the Department of Transportation (DOT) before it is considered legal for street use.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$9.95 ea.
  • Part Number:
View More Information
Make Your Selections
Show Details
Available LED Colors
Brightness
43 lm
LED Quantity
10 LEDs
Connector Type
3-Pin
Mount Type
Flange, Bracket, Grommet

Dimensions: 16.32cm(6.43") x 4.354cm(1.71") x 5.817cm(2.29")

Designed to accept industry standard 3-pin plugs, this 6” oval LED light meets DOT FMVSS 108 requirements for use as brake lights, turn signal lights, hazard lights, parking lights, or tail lights. Mounts flush with a compatible grommet, bezel, or flange. Each light boasts 10 high-flux LEDs that operate within a wide 9-14.8 VDC range and consumes 90% less energy than incandescent lamps. LEDs in this dual-function LED light increase in brightness when brakes are activated. A sonically sealed clear polycarbonate lens allows for a clean look on trucks and trailers. The weatherproof LED truck/trailer lights are available in amber or red. Lifetime warranty on all truck/trailer lights. Also see similar colored-lens version.
Show More
In Stock
$11.95 ea.
Volume price as low as $8.96
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
$11.95 ea.
  • Part Number:
View More Information
Make Your Selections
Select LED Color :
Amber Red
9.
Show Details
LED Color
Colors
Amber
LED Quantity
35 LEDs
Connector Type
3-Pin
Mount Type
Flange, Bracket, Grommet

Dimensions: 16.472cm(6.49") x 4.737cm(1.86") x 5.893cm(2.32")

Designed to accept industry standard 3-pin plugs, this 6” oval sequential arrow LED light is for use as a turn signal light. Mounts flush with a compatible grommet, bezel, or flange. Turn mode sequentially flashes 5 arrows starting from the center outward. This turn light boasts 35 high-flux LEDs that operate within a wide 10-30V DC range and consumes 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. Lifetime warranty on all truck/trailer lights. Dimensions: 6.49”(16.472cm) x 1.86”(4.737cm) x 2.32”(5.893cm)
Show More
In Stock
$24.95 ea.
Volume price as low as $18.71
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$24.95 ea.
  • Part Number:
View More Information
Make Your Selections
Show Details
Available LED Colors
LED Quantity
17 LEDs
Connector Type
3-Pin
Mount Type
Flange, Bracket, Grommet

Dimensions: 16.434cm(6.47") x 5.055cm(1.99") x 5.74cm(2.26")

Designed to accept industry standard 3-pin plugs, this 6” oval LED light meets DOT FMVSS 108 requirements for use as brake lights, turn signal lights, hazard lights, parking lights, and tail lights. Mounts flush with a compatible grommet, bezel, or flange. Each light boasts 17 high-flux LEDs that operate within a wide 9-14.8V DC range and consumes 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. The truck/trailer lights are available in amber or red. Lifetime warranty on all truck/trailer lights. Also see similar clear-lens version.
Show More
In Stock
$17.95 ea.
Volume price as low as $13.46
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
An SAE mark means that the Society of Automotive Engineers has tested a product to ensure that it follows guidelines, standards, and practices in regard to design, construction, and materials. SAE's requirements do not guarantee that the product will be street legal. The product must be approved by the Department of Transportation (DOT) before it is considered legal for street use.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$17.95 ea.
  • Part Number:
View More Information
Make Your Selections
Select LED Color :
Amber Red
10 of 13 Results
of 2

Send us your Feedback