Pigtail:
A pigtail connector allows you to wire a light fixture into a truck or trailer regardless of the connector type that the vehicle requires. They can also be used to wire additional lights into existing fused circuits.
3-Pin:
These connectors are typically found on multifunctional tail, brake, turn, and reverse lights. They include a ground terminal, a positive low-intensity terminal, and positive high-intensity terminal.
2-Pin:
These connectors are typically found on single-function marker or clearance lights. They include a ground terminal and a positive terminal.
Hardshell:
Hardshell connectors provide a weatherproof seal around 3-pin or pigtail adapter plugs for multifunctional tail, brake, turn, and reverse lights. They include a ground terminal, a positive low-intensity terminal, and positive high-intensity terminal.
LED tail, brake, and turn fixtures are a long-lasting solution to illuminating various types of trailers, commercial trucks, utility vehicles, emergency vehicles, and more! DOT-approved round, square, and rectangular fixtures are weatherproof, shock-resistant, and include options, such as built-in side marker and license plate lights.
Dimensions: 8.844cm(3.48") x 9.71cm(3.82") x 9.71cm(3.82")
This 4” round LED light meets DOT FMVSS 108 requirements for use as turn signal lights, brake lights, and tail lights. The included brass hardware (studs, nuts, and lock washers) allows the light to be easily mounted. Boasting 18 high-flux LEDs, the lamp operates within a wide 9-14.8V DC range while consuming 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. Lifetime warranty on all truck/trailer lights. Dimensions: 3.48”(8.844cm) x 3.82”(9.71cm) x 3.82”(9.71cm)
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
An SAE mark means that the Society of Automotive Engineers has tested a product to ensure that it follows guidelines, standards, and practices in regard to design, construction, and materials. SAE's requirements do not guarantee that the product will be street legal. The product must be approved by the Department of Transportation (DOT) before it is considered legal for street use.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.
Increase the visibility of your truck, SUV, or Jeep with this LED Tailgate Light Bar. Using a combination of red and white LEDs, the super slim, flexible tailgate light bar functions as a brake light, running light, reverse light, turn light, and hazard warning light. The vehicle light bar is available in 60" and 48" lengths, is weatherproof, and operates within a 12-14 VDC range. Each light has a strong adhesive backing and comes with mounting clips and screws for added security. Easily wire the LED tailgate light bar to your vehicle with its 4-pin trailer connection harness, or hardwire it to your vehicle's existing wiring. You will need to splice into your vehicle's existing reverse light wire regardless if you have a 4-pin trailer hookup.
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
This 4.5” rectangular LED truck and trailer light meets DOT and SAE requirements for use as a side marker light, clearance light, identification light, or reflex reflector. The LED light comes with a flexible rubber bracket for elevated mounting. Each Light has a sonically sealed polycarbonate lens, weatherproof housing, and 7" pigtail leads. The LED truck/trailer lights operate within a 10-30 VDC range. Available in red and amber. Lifetime warranty on all truck/trailer lights.
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
Dimensions: 14.605cm(5.75") x 7.303cm(2.88") x 17.145cm(6.75")
This multi-function LED box light assembly meets DOT FMVSS 108 requirements and is designed for use as a rear reflex reflector, turn signal/hazard warning lights, reverse lights or back-up lights, brake lights, and tail lights. The included locking nuts allows the light to be easily mounted. Boasting 34 high-flux LEDs (16 red for tail/brake/turn lights and 18 white for back-up lights), the lamp operates within a wide 9-14.8V DC range while consuming 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. Lifetime warranty on all truck/trailer lights. Dimensions: 5.75”(14.605cm) x 2.88”(7.303cm) x 6.75”(17.145cm)
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
An SAE mark means that the Society of Automotive Engineers has tested a product to ensure that it follows guidelines, standards, and practices in regard to design, construction, and materials. SAE's requirements do not guarantee that the product will be street legal. The product must be approved by the Department of Transportation (DOT) before it is considered legal for street use.
RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.
These rear combination LED truck lights meet DOT FMVSS 108 and SAE requirements for use as tail lights, brake lights, parking lights, turn signals, reverse lights, and running lights. The red, white, and amber light heads can be rearranged for customized positioning, and the fixtures can be mounted vertically or horizontally on either side of box trucks, tow trucks, dump trucks, ton trucks, trailers, and flatbed trucks. These LED lamps have 9~14.8 VDC range operation and consume 90% less energy than incandescent lamps. The durably constructed combination tail lights have waterproof housings and sonically sealed polycarbonate lenses. Mounting hardware is included. Lifetime warranty on all truck/trailer lights. Price per pair.
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
An SAE mark means that the Society of Automotive Engineers has tested a product to ensure that it follows guidelines, standards, and practices in regard to design, construction, and materials. SAE's requirements do not guarantee that the product will be street legal. The product must be approved by the Department of Transportation (DOT) before it is considered legal for street use.
Dimensions: 13.95cm(5.49") x 4.8cm(1.89") x 11.4cm(4.49")
Including both right-hand and left-hand lamps along with stainless steel mounting hardware, this 4-1/2" square LED trailer light kit meets DOT FMVSS 108 requirements for use as turn signal lights, side reflectors, brake lights, and tail lights. Each unit boasts 17 high-flux red LEDs that consume 90% less energy at 12V DC than incandescent lamps. The left unit features white LEDs to be used as an LED license plate light. Sonically sealed polycarbonate lens and weatherproof housing. A wiring and installation kit also available (sold separately). Lifetime warranty on all truck/trailer lights. Dimensions: 5.49”(13.95cm) x 1.89”(4.8cm) x 4.49”(11.4cm)
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
An SAE mark means that the Society of Automotive Engineers has tested a product to ensure that it follows guidelines, standards, and practices in regard to design, construction, and materials. SAE's requirements do not guarantee that the product will be street legal. The product must be approved by the Department of Transportation (DOT) before it is considered legal for street use.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.
Dimensions: 18.542cm(7.30") x 11.43cm(4.50") x 4.45cm(1.75")
This dual-faced LED light set meets DOT FMVSS 108 requirements for use as side clearance lights. The included black ABS plastic bracket with 60” power wires allows for easy surface mounting on common commercial and non-commercial trailers. Each light boasts 6 high-flux LEDs—3 rear-facing red and 3 front-facing amber— that operate at 12V DC and consume 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. Price per set. Lifetime warranty on all truck/trailer lights.
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.
Dimensions: 8.844cm(3.48") x 9.71cm(3.82") x 9.71cm(3.82")
This 4” round LED light meets DOT FMVSS 108 requirements for use as license plate lights, turn signal lights, brake lights, and tail lights. The included brass hardware—studs, nuts, and lock washers—allows the light to be easily mounted. Boasting 23 high-flux LEDs (18 red LEDs for stop/turn/tail and 5 white LEDs for license plate illumination), the lamp operates within a wide 9-14.8V DC range while consuming 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. Lifetime warranty on all truck/trailer lights. Dimensions: 3.48”(8.844cm) x 3.82”(9.71cm) x 3.82”(9.71cm)
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
An SAE mark means that the Society of Automotive Engineers has tested a product to ensure that it follows guidelines, standards, and practices in regard to design, construction, and materials. SAE's requirements do not guarantee that the product will be street legal. The product must be approved by the Department of Transportation (DOT) before it is considered legal for street use.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.
Dimensions: 9.652cm(3.80") x 3.1cm(1.22") x 2.159cm(0.85")
Designed to accept a standard 2-pin snap base for mounting, this LED fender light meets DOT FMVSS 108 requirements for use as side clearance lights. Compatible chrome base mount sold separately. Each light boasts 10 high-flux LEDs—5 side-facing red and 5 front-facing amber—to increase visibility. The LED light operates within a wide 9-14.8V DC range and consumes 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. Lifetime warranty on all truck/trailer lights. Dimensions: 3.80"(9.65cm) x 1.23"(3.13cm) x 1.06"(2.70cm)
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
An SAE mark means that the Society of Automotive Engineers has tested a product to ensure that it follows guidelines, standards, and practices in regard to design, construction, and materials. SAE's requirements do not guarantee that the product will be street legal. The product must be approved by the Department of Transportation (DOT) before it is considered legal for street use.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.
This Triangle LED Turn Signal Light is DOT approved and meets SAE requirements for use as a front turn signal light, clearance light, parking light, side marker light, and reflex reflector on 1987-2007 Peterbilt 379 trucks with triangle turn signals. The amber light fixture boasts 31 LEDs (21 on the front, 4 on the side, and 6 on the back) and consumes 90% less energy than incandescent lamps. This LED light features a foam anti-scratch pad and 1' power wires with bullet connectors for simple surface mounting and installation. A weatherproof, shatter-resistant polycarbonate lens is built to withstand impact with road debris and exposure to wet conditions. The LED truck light operates within a 10-14.5 VDC range. Lifetime warranty on all truck/trailer lights. Price per fixture.
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
An SAE mark means that the Society of Automotive Engineers has tested a product to ensure that it follows guidelines, standards, and practices in regard to design, construction, and materials. SAE's requirements do not guarantee that the product will be street legal. The product must be approved by the Department of Transportation (DOT) before it is considered legal for street use.
