RV Custom Lower Tail Lights

4 of 4 Results
Show Details
LED Color
Colors
Red
LED Quantity
18 LEDs
Connector Type
Pigtail
Mount Type
Stud
This 4” round LED light meets DOT FMVSS 108 requirements for use as turn signal lights, brake lights, and tail lights. The included brass hardware (studs, nuts, and lock washers) allows the light to be easily mounted. Boasting 18 high-flux LEDs, the lamp operates within a wide 9-14.8V DC range while consuming 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. Lifetime warranty on all truck/trailer lights. Dimensions: 3.48”(8.844cm) x 3.82”(9.71cm) x 3.82”(9.71cm)
In Stock
$19.95 ea.
Volume price as low as $14.96
An SAE mark means that the Society of Automotive Engineers has tested a product to ensure that it follows guidelines, standards, and practices in regard to design, construction, and materials. SAE's requirements do not guarantee that the product will be street legal. The product must be approved by the Department of Transportation (DOT) before it is considered legal for street use.
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
$19.95 ea.
  • Part Number:
View More Information
Make Your Selections
Show Details
LED Color
Colors
Red
LED Quantity
17 LEDs
Connector Type
Pigtail
Mount Type
Stud
Including both right-hand and left-hand lamps along with stainless steel mounting hardware, this 4-1/2" square LED trailer light kit meets DOT FMVSS 108 requirements for use as turn signal lights, side reflectors, brake lights, and tail lights. Each unit boasts 17 high-flux red LEDs that consume 90% less energy at 12V DC than incandescent lamps. The left unit features white LEDs to be used as an LED license plate light. Sonically sealed polycarbonate lens and weatherproof housing. A wiring and installation kit also available (sold separately). Lifetime warranty on all truck/trailer lights. Dimensions: 5.49”(13.95cm) x 1.89”(4.8cm) x 4.49”(11.4cm)
In Stock
$39.95 per Pair
Volume price as low as $29.96
An SAE mark means that the Society of Automotive Engineers has tested a product to ensure that it follows guidelines, standards, and practices in regard to design, construction, and materials. SAE's requirements do not guarantee that the product will be street legal. The product must be approved by the Department of Transportation (DOT) before it is considered legal for street use.
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
$39.95 per Pair
  • Part Number:
View More Information
Make Your Selections
Show Details
LED Color
Colors
Red
LED Quantity
20 LEDs
Connector Type
Pigtail
Mount Type
Stud
This 8” low-profile rectangular LED light kit meets DOT FMVSS 108 requirements and is designed for use as tail lights, rear turn signal lights, side marker lights, rear reflex reflectors, hazard warning lights, parking lights, brake lights, and license plate lights. The kit includes right-hand lamp, left-hand lamp, and stainless steel mounting hardware (studs, nuts, and lock washers) and offers 3 different mounting options. Each light boasts 20 high-flux LEDs—15 red LEDs, 3 red side marker LEDs, and 2 white SMD LEDs for license plate illumination (left light only)—that operate at 12V DC and consume 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. Compatible wiring kit also available. Lifetime warranty on all truck/trailer lights. Dimensions: 8”(20.32cm) x 2.8”(7.1cm) x 2.8”(7.1cm).
In Stock
$44.95 per Pair
Volume price as low as $33.71
An SAE mark means that the Society of Automotive Engineers has tested a product to ensure that it follows guidelines, standards, and practices in regard to design, construction, and materials. SAE's requirements do not guarantee that the product will be street legal. The product must be approved by the Department of Transportation (DOT) before it is considered legal for street use.
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
$44.95 per Pair
  • Part Number:
View More Information
Make Your Selections
4.
Show Details
LED Color
Colors
Red
LED Quantity
23 LEDs
Connector Type
Pigtail
Mount Type
Stud
This 4” round LED light meets DOT FMVSS 108 requirements for use as license plate lights, turn signal lights, brake lights, and tail lights. The included brass hardware—studs, nuts, and lock washers—allows the light to be easily mounted. Boasting 23 high-flux LEDs (18 red LEDs for stop/turn/tail and 5 white LEDs for license plate illumination), the lamp operates within a wide 9-14.8V DC range while consuming 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. Lifetime warranty on all truck/trailer lights. Dimensions: 3.48”(8.844cm) x 3.82”(9.71cm) x 3.82”(9.71cm)
Out of Stock, Expected 05/07/18
$24.95 ea.
Volume price as low as $18.71
An SAE mark means that the Society of Automotive Engineers has tested a product to ensure that it follows guidelines, standards, and practices in regard to design, construction, and materials. SAE's requirements do not guarantee that the product will be street legal. The product must be approved by the Department of Transportation (DOT) before it is considered legal for street use.
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
$24.95 ea.
  • Part Number:
View More Information
Make Your Selections

Are you having trouble finding something?

Let us know what you were searching for or make a suggestion to help improve our search and product selection.

4 of 4 Results

Send us your Feedback