Refine Results

Connector Type
IP Rating

LED Round Marker Lamps

10 of 16 Results
of 2
Show Details
Available LED Colors
LED Quantity
3 LEDs
Connector Type
Pigtail
Mount Type
Grommet
PC Rated
Yes

Dimensions: 2.794cm(1.10") x 2.794cm(1.10") x 2.794cm(1.10")

This 3/4” mini round LED light is PC rated and meets DOT FMVSS 108 requirements for use as clearance lights and side marker lights. The lights flush mount with attached grommet. Each light boasts 3 high-flux LEDs that operate within a wide 9-14.8V DC range and consumes 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. The truck/trailer lights are available in red and amber. Lifetime warranty on all truck/trailer lights.
Show More
In Stock
Was $5.49
Now $4.95 ea.
Qty Price Ea.
50 $4.45
100 $3.96
500 $3.71
1000+ $3.47
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
An SAE mark means that the Society of Automotive Engineers has tested a product to ensure that it follows guidelines, standards, and practices in regard to design, construction, and materials. SAE's requirements do not guarantee that the product will be street legal. The product must be approved by the Department of Transportation (DOT) before it is considered legal for street use.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

Was $5.49
Now $4.95 ea.
  • Part Number:
View More Information
Make Your Selections
Select LED Color :
Amber Red
Show Details
Available LED Colors
LED Quantity
4 LEDs
Connector Type
2-Pin
Mount Type
Surface, Flange, Grommet
PC Rated
No

Dimensions: 5.07cm(2.00") x 2.85cm(1.12") x 5.07cm(2.00")

Designed to accept industry standard 2-pin plugs, this 2-1/2” round LED light meets DOT FMVSS 108 requirements for use as side lights and clearance lights. Mounts flush with compatible grommet or flange (sold separately). Each light boasts 4 high-flux LEDs that operate within a wide 9-14.8V DC range and consumes 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. The truck/trailer lights are available in red and amber. Lifetime warranty on all truck/trailer lights. Also see similar clear-lens version.
Show More
In Stock
$6.95 ea.
Qty Price Ea.
50 $6.25
100 $5.56
500 $5.21
1000+ $4.87
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
An SAE mark means that the Society of Automotive Engineers has tested a product to ensure that it follows guidelines, standards, and practices in regard to design, construction, and materials. SAE's requirements do not guarantee that the product will be street legal. The product must be approved by the Department of Transportation (DOT) before it is considered legal for street use.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$6.95 ea.
  • Part Number:
View More Information
Make Your Selections
Select LED Color :
Amber Red White
Notes
Show Details
Available LED Colors
LED Quantity
3 LEDs
Connector Type
2-Pin
Mount Type
Flange, Grommet
PC Rated
No

Dimensions: 5.165cm(2.03") x 2.585cm(1.02") x 5.165cm(2.03")

Designed to accept industry standard 2-pin plugs, this 2” round LED light meets DOT FMVSS 108 requirements for use as side lights and clearance lights. Mounts flush with compatible grommet (sold separately). Each light boasts 3 high-flux LEDs that operate within a wide 9-14.8V DC range and consumes 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. The truck/trailer lights are available in white, red, and amber. Lifetime warranty on all truck/trailer lights. Dimensions: 2.04"(5.17cm) x 1.15"(2.91cm) x 2.04"(5.17cm)
Show More
In Stock
$5.95 ea.
Qty Price Ea.
50 $5.35
100 $4.76
500 $4.46
1000+ $4.17
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$5.95 ea.
  • Part Number:
View More Information
Make Your Selections
Select LED Color :
Whites
Natural White
Colors
Amber Red
Notes
Show Details
Available LED Colors
LED Quantity
1 LED
Connector Type
Bullet
Mount Type
Grommet
PC Rated
Yes

Dimensions: 2.794cm(1.10") x 2.794cm(1.10") x 2.48cm(0.98")

This 3/4” mini round LED light is PC rated and meets DOT FMVSS 108 requirements for use as clearance lights and side marker lights. The lights flush mount with attached grommet. Each light boasts 1 high-flux LED that operate within a wide 9-14.8V DC range and consumes 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. The truck/trailer lights are available in red and amber. Lifetime warranty on all truck/trailer lights.
Show More
In Stock
Was $5.49
Now $4.95 ea.
Qty Price Ea.
50 $4.45
100 $3.96
500 $3.71
1000+ $3.47
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
An SAE mark means that the Society of Automotive Engineers has tested a product to ensure that it follows guidelines, standards, and practices in regard to design, construction, and materials. SAE's requirements do not guarantee that the product will be street legal. The product must be approved by the Department of Transportation (DOT) before it is considered legal for street use.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

Was $5.49
Now $4.95 ea.
  • Part Number:
View More Information
Make Your Selections
Select LED Color :
Amber Red
Show Details
Available LED Colors
LED Quantity
9 LEDs
Connector Type
2-Pin
Mount Type
Flange, Grommet
PC Rated
No

Dimensions: 5.165cm(2.03") x 2.585cm(1.02") x 5.165cm(2.03")

Designed to accept industry standard 2-pin plugs, this 2” round LED meets DOT FMVSS 108 requirements for use as side lights and clearance lights. The light flush mounts with a compatible grommet and bezel (sold separately). Each light boasts 9 high-flux LEDs that operate within a wide 9-14.8V DC range and consumes 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. The truck/trailer lights are available in red and amber. Lifetime warranty on all truck/trailer lights. Dimensions: 2.03”(5.165cm) x 1.02”(2.585cm) x 2.03”(5.165cm)
Show More
In Stock
$4.95 ea.
Qty Price Ea.
50 $4.45
100 $3.96
500 $3.71
1000+ $3.47
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$4.95 ea.
  • Part Number:
View More Information
Make Your Selections
Select LED Color :
Amber Red
Notes
Show Details
Available LED Colors
LED Quantity
13 LEDs
Connector Type
2-Pin
Mount Type
Surface, Flange, Grommet
PC Rated
No

Dimensions: 6.401cm(2.52") x 2.438cm(0.96") x 6.401cm(2.52")

Designed to accept industry standard 2-pin plugs, this 2-1/2” round LED light meets DOT FMVSS 108 requirements for use as side lights and clearance lights. Mounts flush with compatible grommet, bezel, or surface adapter (sold separately). Each light boasts 13 high-flux LEDs that operate within a wide 9-14.8V DC range and consumes 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. The truck/trailer lights are available in red and amber. Lifetime warranty on all truck/trailer lights. Dimensions: 2.52”(6.401cm) x 0.96”(2.438cm) x 2.52”(6.401cm)
Show More
In Stock
$6.79 ea.
Qty Price Ea.
50 $6.11
100 $5.43
500 $5.09
1000+ $4.75
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
An SAE mark means that the Society of Automotive Engineers has tested a product to ensure that it follows guidelines, standards, and practices in regard to design, construction, and materials. SAE's requirements do not guarantee that the product will be street legal. The product must be approved by the Department of Transportation (DOT) before it is considered legal for street use.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$6.79 ea.
  • Part Number:
View More Information
Make Your Selections
Select LED Color :
Amber Red
Notes
Show Details
Available LED Colors
LED Quantity
13 LEDs
Connector Type
2-Pin
Mount Type
Flange
PC Rated
No

Dimensions: 8.54cm(3.36") x 2.675cm(1.05") x 8.54cm(3.36")

Designed to accept industry standard 2-pin plugs, this 2-1/2” round LED light meets DOT FMVSS 108 requirements for use as side lights and clearance lights. Mounts flush with compatible grommet, flange, or grommet (sold separately). Each light boasts 13 high-flux LEDs that operate within a wide 9-14.8V DC range and consumes 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. The truck/trailer lights are available in white, red, and amber. Lifetime warranty on all truck/trailer lights. Dimensions: 3.36”(8.54cm) x 1.05”(2.675cm) x 3.36”(8.54cm)
See polarity sensitive version.
Show More
In Stock
Starting at $6.79 ea.
Qty Price Ea.
50 $6.11 to $14.35
100 $5.43 to $12.76
500 $5.09 to $11.96
1000+ $4.75 to $11.17
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
An SAE mark means that the Society of Automotive Engineers has tested a product to ensure that it follows guidelines, standards, and practices in regard to design, construction, and materials. SAE's requirements do not guarantee that the product will be street legal. The product must be approved by the Department of Transportation (DOT) before it is considered legal for street use.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

Starting at $6.79 ea.
  • Part Number:
View More Information
Make Your Selections
Select LED Color :
Amber Red White
Show Details
Available LED Colors
LED Quantity
9 LEDs
Connector Type
2-Pin
Mount Type
Flange
PC Rated
No

Dimensions: 7.39cm(2.91") x 2.585cm(1.02") x 7.39cm(2.91")

Designed to accept industry standard 2-pin plugs, this 2” round LED meets DOT FMVSS 108 requirements for use as side lights and clearance lights. The light mounts flush and features a grey PVC flange. Each light boasts 9 high-flux LEDs that operate within a wide 9-14.8V DC range and consumes 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. The truck/trailer lights are available in amber and red. Lifetime warranty on all truck/trailer lights. Dimensions: 2.91”(7.39cm) x 1.02” (2.585cm) x 2.91”(7.39cm)
Show More
In Stock
$6.29 ea.
Qty Price Ea.
50 $5.66
100 $5.03
500 $4.72
1000+ $4.40
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
An SAE mark means that the Society of Automotive Engineers has tested a product to ensure that it follows guidelines, standards, and practices in regard to design, construction, and materials. SAE's requirements do not guarantee that the product will be street legal. The product must be approved by the Department of Transportation (DOT) before it is considered legal for street use.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$6.29 ea.
  • Part Number:
View More Information
Make Your Selections
Select LED Color :
Amber Red
Show Details
Available LED Colors
Brightness
15 lm
LED Quantity
4 LEDs
Connector Type
2-Pin
Mount Type
Flange, Grommet

Dimensions: 6.452cm(2.54") x 3.137cm(1.24") x 6.452cm(2.54")

PC Rated
No
Designed to accept industry standard 2-pin plugs, this 2.5” round LED light meets DOT FMVSS 108 requirements for use as a side marker light or clearance light. Mounts flush with compatible grommet or flange (sold separately). Each weatherproof light boasts 4 high-flux red LEDs that operate within a wide 9-14.8 VDC range and consumes 90% less energy than incandescent lamps. A sonically sealed clear polycarbonate lens allows for a clean look on trucks and trailers. The truck/trailer lights are available in amber and red. Lifetime warranty on all truck/trailer lights. Also see similar colored-lens version.
Show More
In Stock
$6.95 ea.
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
$6.95 ea.
  • Part Number:
View More Information
Make Your Selections
Select LED Color :
Amber Red
Notes
Show Details
Available LED Colors
LED Quantity
6 LEDs
Connector Type
2-Pin
Mount Type
Flange, Grommet
PC Rated
No

Dimensions: 5.165cm(2.03") x 2.585cm(1.02") x 5.165cm(2.03")

Designed to accept industry standard 2-pin plugs, this 2” round LED meets DOT FMVSS 108 requirements for use as side lights and clearance lights. The light flush mounts with compatible grommet and bezel (sold separately). Each light boasts 3 high-flux LEDs that operate within a wide 9-14.8V DC range and consumes 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. The truck/trailer lights are available in amber and red. Lifetime warranty on all truck/trailer lights. Dimensions: 2.00"(5.08cm) x 1.12"(2.85cm) x 2.00"(5.08cm)
Show More
In Stock
$6.95 ea.
Qty Price Ea.
50 $6.25
100 $5.56
500 $5.21
1000+ $4.87
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
An SAE mark means that the Society of Automotive Engineers has tested a product to ensure that it follows guidelines, standards, and practices in regard to design, construction, and materials. SAE's requirements do not guarantee that the product will be street legal. The product must be approved by the Department of Transportation (DOT) before it is considered legal for street use.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$6.95 ea.
  • Part Number:
View More Information
Make Your Selections
Select LED Color :
Amber Red
Notes
10 of 16 Results
of 2

Send us your Feedback