Related Categories

RGB LED Controllers

10 of 32 Results
of 4
Show Details
Channels
Amps Per Channel
4 Amps/CH
Special Features
Dimmable
Remote Control
Radio Frequency (RF)
Universal Red/Green/Blue (RGB) LED Controller & Dimmer with RF Remote. Remote can control any 12VDC or 24VDC RGB LED products. 20 static color modes with dimming controls, and 19 dynamic color-changing modes with speed controls. Features power cycle mode retention and CPS power plug for easy plug and play installation. Maximum load is 4 Amps per channel - 12 Amps total. 4-pin RGB pigtail connector and battery for RF remote included.
In Stock
$12.95 / set
Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$12.95 / set
  • Part Number:
View More Information
Make Your Selections
2.
LDRF-RGBW6-MZ
Show Details
Channels
Amps Per Channel
6 Amps/CH
Special Features
Color Wheel, Custom Colors, Strobe and Fade
Remote Control
Phone and Tablet (WiFi)
Universal Red/Green/Blue/White (RGBW) LED WiFi Compatible Controller & Dimmer with hand held RF Touch Color Remote (Requires 2 "AAA" batteries -- Not Included). Can control up to four separate "zones" of RGBW lights to be linked and controlled by one wireless remote. Synchronization function allows a single remote to operate one or multiple controllers (User configurable). Color selection wheel provides thousands of color options, selectable pure white mode and 9 dynamic color-changing modes with speed, brightness and ON/OFF controls (White and RGB channels cannot be used simultaneously). Maximum load is 6 amps per channel, 24 amps total. Must be paired with Wi-Fi LED Controller Hub (WIFI-CON -- Sold separately) for adjusting all controller functions using a Smartphone or tablet running Android or iOS using free MiLight 3.0 app.
In Stock
$34.90 ea.
Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$34.90 ea.
  • Part Number:
View More Information
Make Your Selections
3.
Show Details
Channels
Amps Per Channel
6 Amps/CH
Special Features
Color Wheel, Custom Colors, Strobe and Fade
Remote Control
Phone and Tablet (WiFi)
Universal multi-zone Red/Green/Blue (RGB) LED WiFi Compatible Controller & Dimmer with hand held RF Touch Color Remote (Requires 2 "AAA" batteries -- Not Included). Can control up to four separate "zones" of RGB lights to be linked and controlled by one wireless remote. Synchronization function allows a single remote to operate one or multiple controllers (User configurable). Color selection wheel provides thousands of color options and 9 dynamic color-changing modes with speed, brightness and ON/OFF controls. Maximum load is 6 amps per channel, 18 amps total. Must be paired with Wi-Fi LED Controller Hub (WIFI-CON -- Sold separately) for adjusting all controller functions using a Smartphone or tablet running Android or iOS using the free MiLight 3.0 app.
In Stock
$34.90 ea.
Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$34.90 ea.
  • Part Number:
View More Information
Make Your Selections
Show Details
Channels
Amps Per Channel
6 Amps/CH
Special Features
Custom Colors
Remote Control
Phone and Tablet (WiFi)
Universal Red/Green/Blue/White (RGBW) LED WiFi Compatible Controller & Dimmer without remote. Use to control up to four separate "zones" of RGBW LED strips that will be linked and controlled by one or several wireless remotes or smartphones with the Wi-Fi LED Controller Hub (White and RGB channels cannot be used simultaneously). Synchronization function allows a single remote to operate one or multiple controllers (User configurable). Must be paired with Wi-Fi LED Controller Hub (WIFI-CON -- Sold separately) for adjusting all controller functions using a Smartphone or tablet running Android or iOS using the free MiLight 3.0 app.
In Stock
$16.95 ea.
Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$16.95 ea.
  • Part Number:
View More Information
Make Your Selections
Show Details
Channels
Amps Per Channel
6 Amps/CH
Special Features
Custom Colors
Remote Control
Phone and Tablet (WiFi)
Universal Red/Green/Blue (RGB) LED WiFi Compatible Controller & Dimmer without remote. Use to control up to four separate "zones" of RGB LED strips that will be linked and controlled by one or several wireless remotes or smartphones with the Wi-Fi LED Controller Hub. Synchronization function allows a single remote to operate one or multiple controllers (User configurable). Maximum load is 6 amps per channel, 24 amps total. Must be paired with Wi-Fi LED Controller Hub (WIFI-CON -- Sold separately) for adjusting all controller functions using a Smartphone or tablet running Android or iOS using the free MiLight 3.0 app.
In Stock
$16.95 ea.
Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$16.95 ea.
  • Part Number:
View More Information
Make Your Selections
6.
GLUX-MCL
Show Details
Channels
N/A
Amps Per Channel
N/A
Special Features
G-LUX Compatible
Remote Control
N/A
GLUX-MCL RGB remote for GLUX-RGB6W-S40, GLUX-RGB18W-S40, and MR16-RGB3W-60. Must be ordered to control color modes of G-LUX series 6 Watt RGB LED Spot Light, G-LUX series 18 Watt RGB LED Spot Light and 3 Watt RGB LED MR16 Bulb. One controller can be used to control multiple spot lights and bulbs. Aim directly at the face of the spot from no further than about 5 ft away. Uses 1x CR2025 Coin Cell Battery(included). See all compatible G-LUX series products and accessories.
In Stock
$5.95 ea.
Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$5.95 ea.
  • Part Number:
View More Information
Make Your Selections
Show Details
Channels
N/A
Amps Per Channel
N/A
Special Features
Variable Color Temperature, Color Wheel, Custom Colors, Digital Display
Remote Control
Phone and Tablet (WiFi)
This Wi-Fi Hub allows you to control any compatible LED smart bulbs or fixtures with an Apple (iOS) or Android (version 4.3 and above) smartphone or tablet. This device uses the updated MiLight 3.0 app. The hub must be used with Wi-Fi-compatible LED bulbs or fixtures and can also be used with an RGB or RGBW controller to allow for control of LED strips and other LED lights. Simply plug the Wi-Fi hub into a computer with the included USB cord or into an outlet by using a USB wall adapter, and download the free MiLight 3.0 app on your Apple or Android device. Connect to the Wi-Fi Hub using your device's Wi-Fi settings, and use the app to sync your LED lights (see PDF instructions for details).

This Wi-Fi Hub will work with the new MiLight 3.0 app only, but it is also compatible with any product that was previously controlled by MiLight version 2.0.
In Stock
$39.95 ea.
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$39.95 ea.
  • Part Number:
View More Information
Make Your Selections
Show Details
Channels
Amps Per Channel
8 Amps/CH
Special Features
N/A
Remote Control
Radio Frequency (RF)
Designed for use within the EZ Dimmer series, this wireless 4 channel LED dimmer controller operates within a 12-36 VDC while receiving RF signals from a compatible wireless LED dimmer wall switch. The LED receiver has a maximum load capacity of 32 amps and has spring terminal connectors for in and out power connections.
In Stock
$59.95 ea.
Super Bright LEDs, Inc. offers a 3-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Recognized label ensures that a product component, such as a power supply or LED light strip, has been tested and verified as safe to use in a UL-Listed product. UL-Listed product samples are tested by UL and meet their Standards for Safety requirements.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$59.95 ea.
  • Part Number:
View More Information
Make Your Selections
9.
MCBRF-RGB-5ALC4
Show Details
Channels
Amps Per Channel
5 Amps/CH
Special Features
Dream Color Chasing, Strobe and Fade
Remote Control
Radio Frequency (RF)
This RGB LED controller with wireless RF remote is perfect for controlling your RGB LED light strips. The LED remote can dim light strips from 22%-100% using Pulse Width Modulation (PWM). Choose from 43 dynamic color-changing modes with adjustable speed and brightness levels or 30 static color modes with adjustable brightness levels, and control your light strip from up to 50' away. Power-cycle mode retention allows your light strip to return to the mode that was selected before it was powered off. The waterproof controller has a maximum load capacity of 5 amps per red, green, or blue channel and is compatible with LED light strips that operate within a 5-24V DC range. A male LC4 locking connector easily plugs into the female connector on your light strip. Pair up to 3 remotes with the controller. Includes remote battery.
In Stock
$29.95 ea.
Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$29.95 ea.
  • Part Number:
View More Information
Make Your Selections
Show Details
Channels
1 Channel
Amps Per Channel
8 Amps/CH
Special Features
N/A
Remote Control
Radio Frequency (RF)
Designed for use within the EZ Dimmer series, this wireless 1 channel LED dimmer controller operates within a 12-36 VDC while receiving RF signals from a compatible wireless LED dimmer wall switch. The LED receiver has a maximum load capacity of 8 amps and has spring terminal connectors for in and out power connections.
In Stock
$29.95 ea.
Super Bright LEDs, Inc. offers a 3-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Recognized label ensures that a product component, such as a power supply or LED light strip, has been tested and verified as safe to use in a UL-Listed product. UL-Listed product samples are tested by UL and meet their Standards for Safety requirements.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$29.95 ea.
  • Part Number:
View More Information
Make Your Selections
10 of 32 Results
of 4

Related Categories

Send us your Feedback