Refine Results

Connector Type
IP Rating

LED Reverse Lamps

10 of 20 Results
of 2
Show Details
Available LED Colors
LED Quantity
10 LEDs
Connector Type
3-Pin
Mount Type
Flange, Bracket, Grommet

Dimensions: 16.32cm(6.43") x 5.817cm(2.29") x 4.354cm(1.71")

PT-x10 Oval LED Truck and Trailer Lights - 6” Brake/Turn/Tail Lights w/ 10 High Flux LEDs - 3-Pin Connector Designed to accept industry standard 3-pin plugs, this 6” oval LED light meets DOT FMVSS 108 requirements for use as reverse lights or back-up lights, parking lights, turn signal lights, hazard warning lights, brake lights, and tail lights. The light mounts flush with a compatible grommet, bezel, or flange (sold separately). Each light boasts 10 LEDs that operate within a wide 9-14.8V DC range and consumes 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. The truck/trailer lights are available in red, amber, or white. Lifetime warranty on all truck/trailer lights. Dimensions: 6.43"(16.32cm) x 2.29"(5.82cm) x 1.71"(4.35cm)
Show More
In Stock
Starting at $11.95 ea.
Qty Price Ea.
50 - 99 $10.75 to $26.95
100 - 499 $9.56 to $23.96
500 - 999 $8.96 to $22.46
1000 + $8.37 to $20.97
An SAE mark means that the Society of Automotive Engineers has tested a product to ensure that it follows guidelines, standards, and practices in regard to design, construction, and materials. SAE's requirements do not guarantee that the product will be street legal. The product must be approved by the Department of Transportation (DOT) before it is considered legal for street use.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted.
Starting at $11.95 ea.
  • Part Number:
View More Information
Make Your Selections
Select LED Color :
Colors
Amber Red
Whites
White
Notes
Show Details
Available LED Colors
LED Quantity
12 LEDs
Connector Type
3-Pin
Mount Type
Flange, Grommet

Dimensions: 10.811cm(4.26") x 10.811cm(4.26") x 4.646cm(1.83")

Designed to accept industry standard 3-pin plugs, this 4" round LED light meets DOT FMVSS 108 requirements for use as tail lights, parking lights, brake lights, reverse lights, and turn signal lights. The light mounts flush with a compatible grommet or flange (sold separately). Each light boasts 12 high-flux LEDs operating at 12V DC that consume 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. The truck/trailer lights are available in amber, red, or white; white lamps are single intensity. Lifetime warranty on all truck/trailer lights. Dimensions: 4.26”(10.811cm) x 4.26”(10.811cm) x 1.83”(4.646cm)
Show More
In Stock
$14.95 ea.
Qty Price Ea.
50 - 99 $13.45
100 - 499 $11.96
500 - 999 $11.21
1000 + $10.47
An SAE mark means that the Society of Automotive Engineers has tested a product to ensure that it follows guidelines, standards, and practices in regard to design, construction, and materials. SAE's requirements do not guarantee that the product will be street legal. The product must be approved by the Department of Transportation (DOT) before it is considered legal for street use.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted.
$14.95 ea.
  • Part Number:
View More Information
Make Your Selections
Select LED Color :
Colors
Amber Red
Whites
White
Notes
Show Details
LED Color
Whites
White
LED Quantity
12 LEDs
Connector Type
3-Pin
Mount Type
Flange, Grommet

Dimensions: 10.811cm(4.26") x 10.811cm(4.26") x 4.646cm(1.83")

Designed to accept industry standard 3-pin plugs, this 4" round white LED light meets DOT FMVSS 108 requirements for use as reverse lights or back-up lights. The light mounts flush with a compatible grommet or flange (sold separately). Each light boasts 12 high-flux LEDs that consume 90% less energy at 12V DC than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. Lifetime warranty on all truck/trailer lights. Dimensions: 4.26”(10.811cm) x 4.26”10.811cm) x 1.83”(4.646cm)
Show More
In Stock
$14.95 ea.
Qty Price Ea.
50 - 99 $13.45
100 - 499 $11.96
500 - 999 $11.21
1000 + $10.47
An SAE mark means that the Society of Automotive Engineers has tested a product to ensure that it follows guidelines, standards, and practices in regard to design, construction, and materials. SAE's requirements do not guarantee that the product will be street legal. The product must be approved by the Department of Transportation (DOT) before it is considered legal for street use.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted.
$14.95 ea.
  • Part Number:
View More Information
Make Your Selections
Notes
Show Details
LED Color
Whites
White
LED Quantity
10 LEDs
Connector Type
3-Pin
Mount Type
Flange, Bracket, Grommet

Dimensions: 16.32cm(6.43") x 5.817cm(2.29") x 4.354cm(1.71")

Designed to accept industry standard 3-pin plugs, this 6” oval LED light meets DOT FMVSS 108 requirements for use as reverse lights or back-up lights. The light mounts flush with a compatible grommet, bezel, or flange (sold separately). This reverse light boasts 10 high-flux LEDs that operate within a wide 9-14.8V DC range and consumes 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. Lifetime warranty on all truck/trailer lights. Dimensions: 6.43"(16.32cm) x 2.29"(5.82cm) x 1.71"(4.35cm)
Show More
In Stock
$29.95 ea.
Qty Price Ea.
50 - 99 $26.95
100 - 499 $23.96
500 - 999 $22.46
1000 + $20.97
An SAE mark means that the Society of Automotive Engineers has tested a product to ensure that it follows guidelines, standards, and practices in regard to design, construction, and materials. SAE's requirements do not guarantee that the product will be street legal. The product must be approved by the Department of Transportation (DOT) before it is considered legal for street use.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted.
$29.95 ea.
  • Part Number:
View More Information
Make Your Selections
Show Details
LED Color
Whites
White
LED Quantity
10 LEDs
Connector Type
Pigtail
Mount Type
Surface

Dimensions: 20.32cm(8.00") x 9.525cm(3.75") x 2.54cm(1.00")

This 6” oval LED light meets DOT FMVSS 108 requirements for use as reverse lights or back-up lights. Designed to be surface mounted (screws not included) the light features a chrome bezel. The reverse light boasts 10 high-flux LEDs that operate within a wide 9-14.8V DC range and consumes 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. Lifetime warranty on all truck/trailer lights.
Show More
In Stock
$29.95 ea.
Qty Price Ea.
50 - 99 $26.95
100 - 499 $23.96
500 - 999 $22.46
1000 + $20.97
An SAE mark means that the Society of Automotive Engineers has tested a product to ensure that it follows guidelines, standards, and practices in regard to design, construction, and materials. SAE's requirements do not guarantee that the product will be street legal. The product must be approved by the Department of Transportation (DOT) before it is considered legal for street use.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted.
$29.95 ea.
  • Part Number:
View More Information
Make Your Selections
Show Details
Available LED Colors
LED Quantity
10 LEDs
Connector Type
Pigtail
Mount Type
Surface

Dimensions: 20.32cm(8.00") x 9.525cm(3.75") x 2.54cm(1.00")

This 6” oval LED light meets DOT FMVSS 108 requirements for use as parking lights, turn signal lights, reverse lights, and hazard lights. Designed to be surface mounted (screws not included), the light features a chrome bezel. Each light boasts 10 high-flux LEDs, operates within a wide 9-14.8V DC range, and consumes 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. The truck/trailer lights are available in single-intensity white for reverse lights, dual-intensity amber for marker or turn signal functions, or dual-intensity red that brightens when brakes are applied. Lifetime warranty on all truck/trailer lights.
Show More
In Stock
Starting at $14.95 ea.
Qty Price Ea.
50 - 99 $13.45 to $26.95
100 - 499 $11.96 to $23.96
500 - 999 $11.21 to $22.46
1000 + $10.47 to $20.97
An SAE mark means that the Society of Automotive Engineers has tested a product to ensure that it follows guidelines, standards, and practices in regard to design, construction, and materials. SAE's requirements do not guarantee that the product will be street legal. The product must be approved by the Department of Transportation (DOT) before it is considered legal for street use.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted.
Starting at $14.95 ea.
  • Part Number:
View More Information
Make Your Selections
Select LED Color :
Colors
Amber Red
Whites
White
7.
Show Details
Available LED Colors
LED Quantity
20 LEDs
Connector Type
3-Pin
Mount Type
Flange

Dimensions: 15.494cm(6.10") x 10.922cm(4.30") x 3.556cm(1.40")

Designed to accept industry standard 3-pin plugs, this 6” rectangular LED light meets DOT FMVSS 108 requirements for use as reverse lights or back-up lights, turn signal lights, hazard lights, parking lights, and tail lights. The light features a built-in stainless steel flange for mounting. Each light boasts 20 high-flux LEDs that operate within a wide 9-14.8V DC range and consumes 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. The truck/trailer lights are available in white, amber, and red. Lifetime warranty on all truck/trailer lights. Dimensions: 6.1”(15.494cm) x 4.3”(10.922cm) x 1.4”(3.556cm)
Show More
In Stock
Starting at $20.95 ea.
Qty Price Ea.
50 - 99 $18.85 to $26.95
100 - 499 $16.76 to $23.96
500 - 999 $15.71 to $22.46
1000 + $14.67 to $20.97

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted.
Starting at $20.95 ea.
  • Part Number:
View More Information
Make Your Selections
Select LED Color :
Colors
Amber Red
Whites
White
8.
Show Details
LED Color
Whites
White
LED Quantity
20 LEDs
Connector Type
3-Pin
Mount Type
Flange

Dimensions: 15.494cm(6.10") x 10.922cm(4.30") x 3.556cm(1.40")

Designed to accept industry standard 3-pin plugs, this 6” rectangular LED light meets DOT FMVSS 108 requirements for use as reverse lights or back-up lights. This reverse light features a built-in stainless steel flange for mounting. Each light boasts 20 high-flux LEDs that operate within a wide 9-14.8V DC range and consumes 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. Lifetime warranty on all truck/trailer lights. Dimensions: 6.1”(15.494cm) x 4.3”(10.922cm) x 1.4”(3.556cm)
Show More
In Stock
$29.95 ea.
Qty Price Ea.
50 - 99 $26.95
100 - 499 $23.96
500 - 999 $22.46
1000 + $20.97
An SAE mark means that the Society of Automotive Engineers has tested a product to ensure that it follows guidelines, standards, and practices in regard to design, construction, and materials. SAE's requirements do not guarantee that the product will be street legal. The product must be approved by the Department of Transportation (DOT) before it is considered legal for street use.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted.
$29.95 ea.
  • Part Number:
View More Information
Make Your Selections
Show Details
LED Color
Whites
White
LED Quantity
30 LEDs
Connector Type
3-Pin
Mount Type
Flange, Grommet

Dimensions: 11.045cm(4.35") x 11.045cm(4.35") x 4.19cm(1.65")

Designed to accept industry standard 3-pin plugs, this 4” round LED light meets DOT FMVSS 108 requirements for use as reverse lights or back-up lights. The light mounts flush with a compatible grommet or flange (sold separately). This reverse light boasts 30 LEDs that operate within a wide 9-14.8V DC range and consumes 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. Lifetime warranty on all truck/trailer lights. Dimensions: 4.35”(11.045cm) x 4.35”(11.045cm) x 1.65”(4.19cm)
Show More
In Stock
$24.95 ea.
Qty Price Ea.
50 - 99 $22.45
100 - 499 $19.96
500 - 999 $18.71
1000 + $17.47

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted.
$24.95 ea.
  • Part Number:
View More Information
Make Your Selections
Show Details
LED Color
Whites
White
LED Quantity
10 LEDs
Connector Type
3-Pin
Mount Type
Flange, Grommet

Dimensions: 11.045cm(4.35") x 11.045cm(4.35") x 4.19cm(1.65")

Designed to accept industry standard 3-pin plugs, this 4” round LED light meets DOT FMVSS 108 requirements for use as reverse lights or back-up lights. This reverse light mounts flush with a compatible grommet or flange (sold separately). Each light boasts 10 SMD LEDs that operate within a wide 9-14.8V DC range and consumes 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. Lifetime warranty on all truck/trailer lights. Dimensions: 4.29”(10.9cm) x 4.29”(10.9cm) x 1.73”(4.4cm)
Show More
In Stock
$27.95 ea.
Qty Price Ea.
50 - 99 $25.15
100 - 499 $22.36
500 - 999 $20.96
1000 + $19.57
An SAE mark means that the Society of Automotive Engineers has tested a product to ensure that it follows guidelines, standards, and practices in regard to design, construction, and materials. SAE's requirements do not guarantee that the product will be street legal. The product must be approved by the Department of Transportation (DOT) before it is considered legal for street use.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted.
$27.95 ea.
  • Part Number:
View More Information
Make Your Selections
10 of 20 Results
of 2

Send us your Feedback