Refine Results

Connector Type

Help

IP Rating

LED Rectangular Marker Lamps

10 of 25 Results
Show Details
Available LED Colors
LED Quantity
12 LEDs
Connector Type
Pigtail
Mount Type
Surface
PC Rated
No

Dimensions: 9.9cm(3.90") x 2.635cm(1.04") x 4.825cm(1.90")

This 4” double bullseye LED meets DOT FMVSS 108 requirements for use as side lights and clearance lights. The Permastat housing surface mounts and includes a 4-½” positive wire with grounded mounting hole. Each light boasts 12 high-flux LEDs that operate within a wide 9-14.8V DC range and consumes 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. The truck/trailer lights are available in red and amber. Lifetime warranty on all truck/trailer lights. Dimensions: 3.9”(9.9cm) x 1.04”(2.635cm) x 1.9”(4.825cm)
Show More
In Stock
$6.49 ea.
Volume price as low as $4.87
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
An SAE mark means that the Society of Automotive Engineers has tested a product to ensure that it follows guidelines, standards, and practices in regard to design, construction, and materials. SAE's requirements do not guarantee that the product will be street legal. The product must be approved by the Department of Transportation (DOT) before it is considered legal for street use.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$6.49 ea.
  • Part Number:
View More Information
Make Your Selections
Select LED Color :
Red Amber
Show Details
Available LED Colors
LED Quantity
6 LEDs
Connector Type
Pigtail
Mount Type
Surface
PC Rated
No

Dimensions: 9.885cm(3.89") x 2.255cm(0.89") x 1.815cm(0.71")

This 3-7/8” linear LED light meets DOT FMVSS 108 requirements for use as marker lights and clearance lights. The light offers sealed surface mounting with attached 5” positive wire and grounded mounting hole. Each light boasts 6 high-flux LED that operate within a wide 9-14.8V DC range and consumes 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. The truck/trailer lights are available in red and amber. Lifetime warranty on all truck/trailer lights. Dimensions: 3.89”(9.885cm) x 0.89”(2.255cm) x 0.71”(1.815cm)
Show More
In Stock
$5.95 ea.
Volume price as low as $4.46
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
An SAE mark means that the Society of Automotive Engineers has tested a product to ensure that it follows guidelines, standards, and practices in regard to design, construction, and materials. SAE's requirements do not guarantee that the product will be street legal. The product must be approved by the Department of Transportation (DOT) before it is considered legal for street use.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$5.95 ea.
  • Part Number:
View More Information
Make Your Selections
Select LED Color :
Red Amber
Show Details
Available LED Colors
LED Quantity
12 LEDs
Connector Type
2-Pin
Mount Type
Surface
PC Rated
No

Dimensions: 9.569cm(3.77") x 2.4cm(0.94") x 3.1cm(1.22")

This 3-3/4” low profile LED meets DOT FMVSS 108 requirements for use as side lights and clearance lights. The light features 2-pin snap-in mounting with compatible chrome base mount (sold separately). Each light boasts 12 high-flux LEDs that operate within a wide 9-14.8V DC range and consumes 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. The truck/trailer lights are available in red and amber. Lifetime warranty on all truck/trailer lights. Dimensions: 3.80"(9.65cm) x 1.16"(2.62cm) x 1.23"(3.13cm)
Show More
In Stock
$6.49 ea.
Volume price as low as $4.87
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
An SAE mark means that the Society of Automotive Engineers has tested a product to ensure that it follows guidelines, standards, and practices in regard to design, construction, and materials. SAE's requirements do not guarantee that the product will be street legal. The product must be approved by the Department of Transportation (DOT) before it is considered legal for street use.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$6.49 ea.
  • Part Number:
View More Information
Make Your Selections
Select LED Color :
Red Amber
Show Details
Available LED Colors
LED Quantity
3 LEDs
Connector Type
Pigtail
Mount Type
Stud
PC Rated
Yes

Dimensions: 5.38cm(2.12") x 4.019cm(1.58") x 2.847cm(1.12")

This 2-1/8” rectangle LED is PC rated and meets DOT FMVSS 108 requirements for use as side lights and clearance lights. The attached 7” positive wire and included stainless steel locking nut allows the light to be stud mounted. The stud must connect to ground. Each light boasts 3 high-flux LEDs that operate within a wide 9-14.8V DC range and consumes 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. The truck/trailer lights are available in red and amber. Lifetime warranty on all truck/trailer lights. Dimensions: 2.12”(5.38cm) x 1.58”(4.019cm) x 1.12”(2.847cm)
Show More
In Stock
$4.95 ea.
Volume price as low as $3.71
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
$4.95 ea.
  • Part Number:
View More Information
Make Your Selections
Select LED Color :
Red Amber
Show Details
Available LED Colors
Brightness
77 lm
LED Quantity
24 LEDs
Connector Type
3-Pin
Mount Type
Grommet

Dimensions: 13.475cm(5.31") x 4.85cm(1.91") x 8.7cm(3.43")

Designed to accept industry standard 3-pin plugs, this 5” dual-intensity rectangle LED light meets DOT FMVSS 108 requirements for use as tail lights, turn signal lights, hazard lights, brake lights, reverse lights or back-up lights, and parking lights. The light mounts flush with a compatible grommet (sold separately). Each light boasts 24 high flux LEDs that operate within a wide 9-14.8V DC range that consumes 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. The truck/trailer lights are available in white, amber, or red. Lifetime warranty on all truck/trailer lights. Dimensions: 5.31”(13.475cm) x 1.91”(4.85cm) x 3.43”(8.7cm)
Show More
In Stock
Starting at $16.95 ea.
Volume price as low as $12.71
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
An SAE mark means that the Society of Automotive Engineers has tested a product to ensure that it follows guidelines, standards, and practices in regard to design, construction, and materials. SAE's requirements do not guarantee that the product will be street legal. The product must be approved by the Department of Transportation (DOT) before it is considered legal for street use.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

Starting at $16.95 ea.
  • Part Number:
View More Information
Make Your Selections
Select LED Color :
Red Amber White
Show Details
Available LED Colors
LED Quantity
2 LEDs
Connector Type
Pigtail
Mount Type
Surface
PC Rated
No

Dimensions: 9.525cm(3.75") x 5.715cm(2.25") x 1.854cm(0.73")

This 3-3/4” rectangle LED with chrome-plated plastic bezel meets DOT FMVSS 108 requirements for use as side lights and clearance lights. The light surface mounts—1-1/8” flush mounting hole required— and includes two 6” pigtail leads. Each light boasts 2 high-flux LEDs that operate within a wide 9-14.8V DC range and consumes 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. The truck/trailer lights are available in red and amber. Lifetime warranty on all truck/trailer lights. Dimensions: 3.77”(9.576cm) x 2.26”(5.741cm) x 0.63”(1.600cm)
Show More
Various Options In Stock
$7.95 ea.
Volume price as low as $5.96
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
An SAE mark means that the Society of Automotive Engineers has tested a product to ensure that it follows guidelines, standards, and practices in regard to design, construction, and materials. SAE's requirements do not guarantee that the product will be street legal. The product must be approved by the Department of Transportation (DOT) before it is considered legal for street use.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$7.95 ea.
  • Part Number:
View More Information
Make Your Selections
Select LED Color :
Red Amber
Show Details
Available LED Colors
LED Quantity
6 LEDs
Connector Type
Pigtail
Mount Type
Surface
PC Rated
Yes

Dimensions: 12.24cm(4.82") x 3.505cm(1.38") x 5.195cm(2.05")

This 4-7/8” rectangle LED with ABS chrome armor bezel meets DOT FMVSS 108 requirements for use as side lights and clearance lights. The light surface mounts and includes two mounting screws and two attached 6” pigtail leads. Each light boasts 6 high-flux LEDs that operate within a wide 9-14.8V DC range and consumes 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. The truck/trailer lights are available in red and amber. Lifetime warranty on all truck/trailer lights. Dimensions: 4.82”(12.24cm) x 1.38”(3.505cm) x 2.05”(195cm)
Show More
In Stock
$9.95 ea.
Volume price as low as $7.46
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
An SAE mark means that the Society of Automotive Engineers has tested a product to ensure that it follows guidelines, standards, and practices in regard to design, construction, and materials. SAE's requirements do not guarantee that the product will be street legal. The product must be approved by the Department of Transportation (DOT) before it is considered legal for street use.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$9.95 ea.
  • Part Number:
View More Information
Make Your Selections
Select LED Color :
Red Amber
Show Details
Available LED Colors
LED Quantity
8 LEDs
Connector Type
Pigtail
Mount Type
Surface
PC Rated
No

Dimensions: 15.25cm(6.00") x 2.975cm(1.17") x 5.155cm(2.03")

This 6” rectangle LED with reflective lens meets DOT FMVSS 108 requirements for use as side lights and clearance lights. The light surface mounts and features sealed mounting, a grounded mounting hole, and attached 9-1/2” positive wire. Each light boasts 8 high-flux LEDs that operate within a wide 9-14.8V DC range and consumes 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. The truck/trailer lights are available in red and amber. Lifetime warranty on all truck/trailer lights. Dimensions: 6”(15.25cm) x 1.17”(2.975cm) x 2.03”(5.155cm)
Show More
In Stock
$7.95 ea.
Volume price as low as $5.96
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
An SAE mark means that the Society of Automotive Engineers has tested a product to ensure that it follows guidelines, standards, and practices in regard to design, construction, and materials. SAE's requirements do not guarantee that the product will be street legal. The product must be approved by the Department of Transportation (DOT) before it is considered legal for street use.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$7.95 ea.
  • Part Number:
View More Information
Make Your Selections
Select LED Color :
Red Amber
Show Details
Available LED Colors
Brightness
35 lm
LED Quantity
20 LEDs
Connector Type
3-Pin
Mount Type
Flange

Dimensions: 15.494cm(6.10") x 10.922cm(4.30") x 3.556cm(1.40")

Designed to accept industry standard 3-pin plugs, this 6” rectangular LED light meets DOT FMVSS 108 requirements for use as reverse lights or back-up lights, turn signal lights, hazard lights, parking lights, and tail lights. The light features a built-in stainless steel flange for mounting. Each light boasts 20 high-flux LEDs that operate within a wide 9-14.8V DC range and consumes 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. The truck/trailer lights are available in white, amber, and red. Lifetime warranty on all truck/trailer lights. Dimensions: 6.1”(15.494cm) x 4.3”(10.922cm) x 1.4”(3.556cm)
Show More
In Stock
Starting at $20.95 ea.
Volume price as low as $15.71
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

Starting at $20.95 ea.
  • Part Number:
View More Information
Make Your Selections
Select LED Color :
Red Amber White
Show Details
LED Color
LED Quantity
6 LEDs
Connector Type
Pigtail
Mount Type
Surface, Fender
PC Rated
No

Dimensions: 18.542cm(7.30") x 11.43cm(4.50") x 4.45cm(1.75")

This dual-faced LED light set meets DOT FMVSS 108 requirements for use as side clearance lights. The included black ABS plastic bracket with 60” power wires allows for easy surface mounting on common commercial and non-commercial trailers. Each light boasts 6 high-flux LEDs—3 rear-facing red and 3 front-facing amber— that operate at 12V DC and consume 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. Price per set. Lifetime warranty on all truck/trailer lights.
Show More
In Stock
$14.95 per Pair
Volume price as low as $11.21
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$14.95 per Pair
  • Part Number:
View More Information
Make Your Selections
10 of 25 Results

Send us your Feedback