Power Supply Accessories

of 3 Prev Next
1.

CPS-x2ST Standard Barrel Connector to Screw Terminal Adapter

$1.95 ea.
4.5
8
(8 Reviews)
Product Code: CPS-x2ST
Stock: In Stock
Expand Details
Gauge
N/A
Input Voltage
N/A
Power Supply Type
N/A
CPS-x2ST standard 5.5mm male or female barrel connector to screw terminal adapter. CPS-F2ST adapter allows products with pigtail power connections to be powered by CPS series power supplies.
2.

CPS-PT Pigtail CPS Power Adapter Cable

$2.99 ea.
1.5
2
(2 Reviews)
Product Code: CPS-PT
Stock: In Stock
Expand Details
Gauge
N/A
Input Voltage
N/A
Power Supply Type
N/A
Pigtail wire leads power adapter cable for compact power supplies. Allows products with power wires to connect with 5.5mm barrel connector. 63.5cm(25in) length.
3.

CPS-EXTx series Power Cable Extensions

$1.49 to $1.95 ea.
2
1
(1 Reviews)
Product Code: CPS-EXTx
Stock: In Stock
Expand Details
Gauge
N/A
Input Voltage
N/A
Power Supply Type
N/A
CPS-EXTx extension cable for CPS power supplies or BPS-12VDC-x battery power supplies with 5.5mm barrel connector. Available in 100cm(39.3in) or 300cm(118in) length and is for low voltage DC cables.
4.

CPS-MxF Compact Power Supply to Splitter Cable

$3.45 to $3.95 ea.
5
1
(1 Reviews)
Product Code: CPS-MxF
Stock: In Stock
Expand Details
Gauge
N/A
Input Voltage
N/A
Power Supply Type
N/A
1 female 5.5mm barrel connector to 2 or 4 male 5.5mm barrel connectors for our CPS series power supplies. Easily power multiple products with one Compact Power Supply. 52.07cm(20.5in) length.
5.

CPS-MxFSW Compact Power Supply to In-line Switch

$9.95 to $10.95 ea.
5
2
(2 Reviews)
Product Code: CPS-MxFSW
Stock: In Stock
Expand Details
Gauge
N/A
Input Voltage
N/A
Power Supply Type
N/A
Plug and Play in-line switch for CPS series power supplies and products. ON/OFF switch with 1 female and 1 or 2 male 5.5mm barrel connectors. 5 amps max at 12VDC. 31.75cm(12.5in) wire length.

Power Cord for Power Supplies

$4.95 ea.
Product Code: POWERCORD
Stock: In Stock
Expand Details
Gauge
18
Input Voltage
N/A
Power Supply Type
N/A
Standard grounded power cord for plugging power supplies into standard 115VAC receptacle. 18 gauge, SJT type 3 conductor, 6 foot length.
7.

12V AC to DC Converter Module

$12.95 ea.
4.8
5
(5 Reviews)
Product Code: LVC-12ACDC-3A
Stock: In Stock
Expand Details
Gauge
N/A
Input Voltage
12 VAC
Power Supply Type
N/A
12 Volt AC Input to 12 Volt DC waterproof voltage converter. Use AC to DC converter to allow your existing 12 Volt AC power supply, for instance a landscape power supply, to power any 12 Volt DC LED Light. Fully potted case with built-in mounting tabs. Available in 3 Amp max loads. All input and output wires have stripped tinned leads.
8.

Portable 12V DC 8-Cell Battery Power Supply

$2.95 to $4.95 ea.
3.5
2
(2 Reviews)
Product Code: BPS-12VDC
Stock: In Stock
Expand Details
Gauge
N/A
Input Voltage
N/A
Power Supply Type
Battery
Battery Powered 12V DC Portable Compact Power Supply (CPS) can power most of our 12V DC products. Uses 8 x AA or 8 x D batteries and has 5.5mm output connector. Run time will vary based on power draw and battery capacity. (Use new alkaline batteries only)

NEMA 1 Power Supply Steel Enclosure - For LPV/LPC-20, -35, -60

$39.95 ea.
Product Code: TRC-E-LPV203560
Stock: In Stock
Expand Details
Gauge
N/A
Input Voltage
N/A
Power Supply Type
N/A
Rugged NEMA 1 steel enclosure. This indoor enclosure is ideal when a permanently installed power supply is required for your application and it meets NEMA 1 requirements. Integral mounting tabs with 4 x .20" mounting holes for surface mountings. 4 x 1/2" NPT Knockouts. Fits either Mean Well LPV-20-12 & LPV-60-12.
10.

CPS-C21 CPS Power Adapter for LB1 & RLBN series Light Bars

$2.99 ea.
5
1
(1 Reviews)
Product Code: CPS-C21
Stock: In Stock
Expand Details
Gauge
N/A
Input Voltage
N/A
Power Supply Type
N/A
CPS power adapter cable for connecting LB1 and RLBN series light bars to a 12 volt power source. 60.9cm(24in) length.
of 3 Prev Next

Send us your Feedback