Refine Results

Cross Reference Number

Connector Type

Help

IP Rating

Help

LED Mini Truck and Trailer Lights

5 of 5 Results
Show Details
Available LED Colors
LED Quantity
3 LEDs
Connector Type
Pigtail
Mount Type
Grommet
PC Rated
Yes

Dimensions: 2.794cm(1.10") x 2.794cm(1.10") x 2.794cm(1.10")

This 3/4” mini round LED light is PC rated and meets DOT FMVSS 108 requirements for use as clearance lights and side marker lights. The lights flush mount with attached grommet. Each light boasts 3 high-flux LEDs that operate within a wide 9-14.8V DC range and consumes 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. The truck/trailer lights are available in red and amber. Lifetime warranty on all truck/trailer lights.
Show More
In Stock
$4.95 ea.
Volume price as low as $3.71
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
An SAE mark means that the Society of Automotive Engineers has tested a product to ensure that it follows guidelines, standards, and practices in regard to design, construction, and materials. SAE's requirements do not guarantee that the product will be street legal. The product must be approved by the Department of Transportation (DOT) before it is considered legal for street use.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$4.95 ea.
  • Part Number:
View More Information
Make Your Selections
Select LED Color :
Red Amber
Show Details
Available LED Colors
LED Quantity
1 LED
Connector Type
Bullet
Mount Type
Grommet
PC Rated
Yes

Dimensions: 2.794cm(1.10") x 2.794cm(1.10") x 2.794cm(1.10")

This 3/4” mini round LED light is PC rated and meets DOT FMVSS 108 requirements for use as clearance lights and side marker lights. The lights flush mount with attached grommet. Each light boasts 1 high-flux LED that operate within a wide 9-14.8V DC range and consumes 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. The truck/trailer lights are available in red and amber. Lifetime warranty on all truck/trailer lights.
Show More
Various Options In Stock
$4.95 ea.
Volume price as low as $3.71
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
An SAE mark means that the Society of Automotive Engineers has tested a product to ensure that it follows guidelines, standards, and practices in regard to design, construction, and materials. SAE's requirements do not guarantee that the product will be street legal. The product must be approved by the Department of Transportation (DOT) before it is considered legal for street use.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$4.95 ea.
  • Part Number:
View More Information
Make Your Selections
Select LED Color :
Red Amber
Show Details
LED Color
Colors
Amber
LED Quantity
1 LED
Connector Type
Pigtail
Mount Type
Surface
PC Rated
No

Dimensions: 2.98cm(1.17") x 2.98cm(1.17") x 1.1cm(0.43")

This 1” mini round LED meets DOT FMVSS 108 requirements for use as trailer fender clearance lights. Each light boasts 1 5050 SMD LED that operates within a wide 9-14.8V DC range and consumes 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. The truck/trailer lights are available in red and amber. Lifetime warranty on all truck/trailer lights. Dimensions: 1.17”(2.98cm) x 1.17”(2.98cm) x 0.43”(1.1cm)
Show More
In Stock
$3.95 ea.
Volume price as low as $2.96
Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
An SAE mark means that the Society of Automotive Engineers has tested a product to ensure that it follows guidelines, standards, and practices in regard to design, construction, and materials. SAE's requirements do not guarantee that the product will be street legal. The product must be approved by the Department of Transportation (DOT) before it is considered legal for street use.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$3.95 ea.
  • Part Number:
View More Information
Make Your Selections
Show Details
LED Color
Colors
Red
LED Quantity
2 LEDs
Connector Type
Bullet
Mount Type
Surface
PC Rated
Yes

Dimensions: 4.899cm(1.93") x 2.593cm(1.02") x 2.301cm(0.91")

This 2” oval LED meets DOT FMVSS 108 requirements for use as side lights and clearance lights. The light features a chrome-plated or black plastic bezel and surface mounts with the two attached 8” positive pigtail wires with bullet connectors. Each light boasts 2 high-flux LEDs that operate within a wide 9-14.8V DC range and consumes 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. The truck/trailer lights are available in white, red, and amber. Lifetime warranty on all truck/trailer lights. Dimensions: 1.93”(4.90cm) x1.02”( 2.59cm) x 0.90”(2.3cm)
Show More
Clearance
Was $4.95
Now $3.88 ea.
Volume price as low as $2.91
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
An SAE mark means that the Society of Automotive Engineers has tested a product to ensure that it follows guidelines, standards, and practices in regard to design, construction, and materials. SAE's requirements do not guarantee that the product will be street legal. The product must be approved by the Department of Transportation (DOT) before it is considered legal for street use.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

Was $4.95
Now $3.88 ea.
  • Part Number:
View More Information
Make Your Selections
Select Finish :
Black Chrome
Show Details
LED Color
Colors
Red
LED Quantity
1 LED
Connector Type
Pigtail
Mount Type
Grommet
PC Rated
Yes

Dimensions: 2.794cm(1.10") x 2.794cm(1.10") x 2.48cm(0.98")

This 3/4” mini round LED light is PC rated and meets DOT FMVSS 108 requirements for use as clearance lights and side marker lights. The lights flush mount with attached grommet. Each light boasts 1 high-flux LED that operates within a wide 9-14.8V DC range and consumes 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. The truck/trailer lights are available in red and amber. Lifetime warranty on all truck/trailer lights.
Show More
Out of Stock
$4.95 ea.
Volume price as low as $3.71
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
An SAE mark means that the Society of Automotive Engineers has tested a product to ensure that it follows guidelines, standards, and practices in regard to design, construction, and materials. SAE's requirements do not guarantee that the product will be street legal. The product must be approved by the Department of Transportation (DOT) before it is considered legal for street use.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$4.95 ea.
  • Part Number:
View More Information
Make Your Selections

Are you having trouble finding something?

Let us know what you were searching for or make a suggestion to help improve our search and product selection.

5 of 5 Results

Send us your Feedback