Related Categories

Currently Shopping By...

Refine Results

Connector Type

Help

IP Rating

Help

PC Rated Marker Lights/Clearance Lights

Keep that truck or trailer easy to see, and properly marked with LED marker lights, clearance lights and reflectors. Wide selection of DOT, SAE, P2 and P3 waterproof lights in a variety of shapes and sizes to fit any truck and trailer application.

Currently Refining By: Features: PC Rated Remove All
10 of 16 Results
Show Details
Available LED Colors
LED Quantity
3 LEDs
Connector Type
Pigtail
Mount Type
Grommet
PC Rated
Yes

Dimensions: 2.794cm(1.10") x 2.794cm(1.10") x 2.794cm(1.10")

This 3/4” mini round LED light is PC rated and meets DOT FMVSS 108 requirements for use as clearance lights and side marker lights. The lights flush mount with attached grommet. Each light boasts 3 high-flux LEDs that operate within a wide 9-14.8V DC range and consumes 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. The truck/trailer lights are available in red and amber. Lifetime warranty on all truck/trailer lights.
Show More
In Stock
$4.95 ea.
Volume price as low as $3.71
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
An SAE mark means that the Society of Automotive Engineers has tested a product to ensure that it follows guidelines, standards, and practices in regard to design, construction, and materials. SAE's requirements do not guarantee that the product will be street legal. The product must be approved by the Department of Transportation (DOT) before it is considered legal for street use.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$4.95 ea.
  • Part Number:
View More Information
Make Your Selections
Select LED Color :
Red Amber
Show Details
Available LED Colors
LED Quantity
1 LED
Connector Type
Bullet
Mount Type
Grommet
PC Rated
Yes

Dimensions: 2.794cm(1.10") x 2.794cm(1.10") x 2.794cm(1.10")

This 3/4” mini round LED light is PC rated and meets DOT FMVSS 108 requirements for use as clearance lights and side marker lights. The lights flush mount with attached grommet. Each light boasts 1 high-flux LED that operate within a wide 9-14.8V DC range and consumes 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. The truck/trailer lights are available in red and amber. Lifetime warranty on all truck/trailer lights.
Show More
Various Options In Stock
$4.95 ea.
Volume price as low as $3.71
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
An SAE mark means that the Society of Automotive Engineers has tested a product to ensure that it follows guidelines, standards, and practices in regard to design, construction, and materials. SAE's requirements do not guarantee that the product will be street legal. The product must be approved by the Department of Transportation (DOT) before it is considered legal for street use.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$4.95 ea.
  • Part Number:
View More Information
Make Your Selections
Select LED Color :
Red Amber
Show Details
Available LED Colors
LED Quantity
3 LEDs
Connector Type
Pigtail
Mount Type
Stud
PC Rated
Yes

Dimensions: 5.38cm(2.12") x 4.019cm(1.58") x 2.847cm(1.12")

This 2-1/8” rectangle LED is PC rated and meets DOT FMVSS 108 requirements for use as side lights and clearance lights. The attached 7” positive wire and included stainless steel locking nut allows the light to be stud mounted. The stud must connect to ground. Each light boasts 3 high-flux LEDs that operate within a wide 9-14.8V DC range and consumes 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. The truck/trailer lights are available in red and amber. Lifetime warranty on all truck/trailer lights. Dimensions: 2.12”(5.38cm) x 1.58”(4.019cm) x 1.12”(2.847cm)
Show More
In Stock
$4.95 ea.
Volume price as low as $3.71
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
$4.95 ea.
  • Part Number:
View More Information
Make Your Selections
Select LED Color :
Red Amber
Show Details
Available LED Colors
LED Quantity
6 LEDs
Connector Type
Pigtail
Mount Type
Surface
PC Rated
Yes

Dimensions: 12.24cm(4.82") x 3.505cm(1.38") x 5.195cm(2.05")

This 4-7/8” rectangle LED with ABS chrome armor bezel meets DOT FMVSS 108 requirements for use as side lights and clearance lights. The light surface mounts and includes two mounting screws and two attached 6” pigtail leads. Each light boasts 6 high-flux LEDs that operate within a wide 9-14.8V DC range and consumes 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. The truck/trailer lights are available in red and amber. Lifetime warranty on all truck/trailer lights. Dimensions: 4.82”(12.24cm) x 1.38”(3.505cm) x 2.05”(195cm)
Show More
In Stock
$9.95 ea.
Volume price as low as $7.46
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
An SAE mark means that the Society of Automotive Engineers has tested a product to ensure that it follows guidelines, standards, and practices in regard to design, construction, and materials. SAE's requirements do not guarantee that the product will be street legal. The product must be approved by the Department of Transportation (DOT) before it is considered legal for street use.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$9.95 ea.
  • Part Number:
View More Information
Make Your Selections
Select LED Color :
Red Amber
Show Details
Available LED Colors
LED Quantity
3 LEDs
Connector Type
Pigtail
Mount Type
Surface
PC Rated
Yes

Dimensions: 7.34cm(2.89") x 2.72cm(1.07") x 3.775cm(1.49")

This 3” rectangle LED is PC rated and meets DOT FMVSS 108 requirements for use as side lights and clearance lights. The light features a chrome-plated plastic bezel and surface mounts with the included self-grounding gasket, two mounting screws, and attached 18” power wire. Each light boasts 3 high-flux LEDs that operate within a wide 9-14.8V DC range and consumes 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. The truck/trailer lights are available in red and amber. Lifetime warranty on all truck/trailer lights. Dimensions: 2.89”(7.34cm) x 1.07”(2.72cm) x 1.49”(3.775cm)
Show More
In Stock
$5.95 ea.
Volume price as low as $4.46
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
An SAE mark means that the Society of Automotive Engineers has tested a product to ensure that it follows guidelines, standards, and practices in regard to design, construction, and materials. SAE's requirements do not guarantee that the product will be street legal. The product must be approved by the Department of Transportation (DOT) before it is considered legal for street use.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$5.95 ea.
  • Part Number:
View More Information
Make Your Selections
Select LED Color :
Red Amber
Show Details
Available LED Colors
LED Quantity
5 LEDs
Connector Type
2-Pin
Mount Type
Flange, Grommet
PC Rated
Yes

Dimensions: 5.165cm(2.03") x 2.81cm(1.11") x 5.165cm(2.03")

2 inch round LED marker/clearance light available in red or amber. Flush mount with compatible grommet and chrome bezel available (sold separately). Meets PC standards. 9~14.8 VDC. Meets DOT FMVSS 108 requirements in any 360 degree position. Sonically sealed polycarbonate lens and weatherproof housing. Accepts industry standard 2-pin plug. 5 high-flux LEDs consume 90% less energy than incandescent lamps, with no incandescent bulbs to replace. 2.02"(5.13cm) x 0.92"(2.34cm) x 2.02"(5.13cm).
Show More
In Stock
$6.95 ea.
Volume price as low as $5.21
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$6.95 ea.
  • Part Number:
View More Information
Make Your Selections
Select LED Color :
Red Amber
Notes
Show Details
Available LED Colors
LED Quantity
24 LEDs
Connector Type
Pigtail
Mount Type
Surface
PC Rated
Yes

Dimensions: 6.792cm(2.67") x 4.246cm(1.67") x 8.659cm(3.41")

This 3-3/8” triangle LED is PC rated and meets DOT FMVSS 108 requirements for use as cab marker lights. The light surface mounts and includes two grounded mounting holes and attached 5” positive pigtail wire. Each light boasts 24 high-flux LEDs that operate within a wide 9-14.8V DC range and consumes 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. The truck/trailer lights are available in red and amber. Lifetime warranty on all truck/trailer lights.
Show More
In Stock
$9.95 ea.
Volume price as low as $7.46
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
An SAE mark means that the Society of Automotive Engineers has tested a product to ensure that it follows guidelines, standards, and practices in regard to design, construction, and materials. SAE's requirements do not guarantee that the product will be street legal. The product must be approved by the Department of Transportation (DOT) before it is considered legal for street use.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$9.95 ea.
  • Part Number:
View More Information
Make Your Selections
Select LED Color :
Red Amber
Show Details
Available LED Colors
LED Quantity
4 LEDs
Connector Type
2-Pin
Mount Type
Surface
PC Rated
Yes

Dimensions: 9.569cm(3.77") x 3.1cm(1.22") x 2.4cm(0.94")

Designed to accept industry standard 2-pin plugs, this 3-3/4” round LED is PC rated and meets DOT FMVSS 108 requirements for use as side lights and clearance lights. The light utilizes standard 2-pin mounting with compatible chrome base mount (sold separately). Each light boasts 4 high-flux LEDs that operate within a wide 9-14.8V DC range and consumes 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. The truck/trailer lights are available in red and amber. Lifetime warranty on all truck/trailer lights. Dimensions: 3.77"(9.57cm) x 1.20"(1.31cm) x 1.21"(3.01cm)
Show More
In Stock
$5.95 ea.
Volume price as low as $4.46
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
An SAE mark means that the Society of Automotive Engineers has tested a product to ensure that it follows guidelines, standards, and practices in regard to design, construction, and materials. SAE's requirements do not guarantee that the product will be street legal. The product must be approved by the Department of Transportation (DOT) before it is considered legal for street use.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$5.95 ea.
  • Part Number:
View More Information
Make Your Selections
Select LED Color :
Red Amber
Show Details
Available LED Colors
LED Quantity
2 LEDs
Connector Type
Pigtail
Mount Type
Stud
PC Rated
Yes

Dimensions: 7.239cm(2.85") x 4.232cm(1.67") x 5.369cm(2.11")

2-7/8 inch round PC rated LED marker/clearance light with reflectorized lens. Stud mount; stud MUST connect to ground. Locking nut for stud included. 9~14.8 VDC. Meets DOT FMVSS 108 requirements in any 360 degree position. Sonically sealed polycarbonate lens and weatherproof housing. Attached 5" positive pigtail wire. The powerful light has 2 high-flux LEDs and consumes 90 percent less energy than incandescent lamps. Dimensions: 7.239cm(2.85") x 4.232cm(1.67") x 5.369cm(2.11").
Show More
In Stock
$4.95 ea.
Volume price as low as $3.71
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
An SAE mark means that the Society of Automotive Engineers has tested a product to ensure that it follows guidelines, standards, and practices in regard to design, construction, and materials. SAE's requirements do not guarantee that the product will be street legal. The product must be approved by the Department of Transportation (DOT) before it is considered legal for street use.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$4.95 ea.
  • Part Number:
View More Information
Make Your Selections
Select LED Color :
Red Amber
Show Details
Available LED Colors
LED Quantity
14 LEDs
Connector Type
Pigtail
Mount Type
Surface
PC Rated
Yes

Dimensions: 9.958cm(3.92") x 2.553cm(1.01") x 4.975cm(1.96")

This 4” rectangle LED is PC rated and meets DOT FMVSS 108 requirements for use as side lights and clearance lights. The light surface mounts and includes two 5-1/2” pigtail leads. Each light boasts 14 high-flux LEDs that operate within a wide 9-14.8V DC range and consumes 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing. The truck/trailer lights are available in red and amber. Lifetime warranty on all truck/trailer lights. Dimensions: 3.92”(9.958cm) x 1.01”(2.553cm) x 1.96”(4.975cm)
Show More
In Stock
$9.95 ea.
Volume price as low as $7.46
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted. Read More
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.
An SAE mark means that the Society of Automotive Engineers has tested a product to ensure that it follows guidelines, standards, and practices in regard to design, construction, and materials. SAE's requirements do not guarantee that the product will be street legal. The product must be approved by the Department of Transportation (DOT) before it is considered legal for street use.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$9.95 ea.
  • Part Number:
View More Information
Make Your Selections
Select LED Color :
Red Amber
10 of 16 Results

Related Categories

Send us your Feedback