Emergency Driver - LED Exit Signs and Emergency Lights
Our line of LED emergency exit lights and signs remains “On” during power outages to guide people safely out of a building or room in the event of an emergency. These fixtures are commonly found in warehouses, industrial spaces, office hallways, corridors, and above doorways. Our emergency lights utilize a battery backup to provide a minimum of 90 minutes of emergency lighting during power outages. These LED exit and emergency lights are designed to last 25 times longer than standard incandescent or halogen fixtures. We offer various features, including flame-retardant thermoplastic, acrylic edge lit, steel NYC-approved housings, and different color options.
Filter
-
1
LED Emergency Battery Backup Lighting Kit - 6W - 760 lumens
ShowHide specs-
Color Options
- Volts
- 100-277 VAC
-
IP Rating
- IP20
- Emergency Operation Time
- ≥90 Minutes
- Battery Type
- Li-ion
N/A -
Color Options
-
2
In-Fixture Compact Emergency LED Driver and Battery Pack - 8W - 24-48 VDC
ShowHide specs
-
Color Options
- Volts
- 100-277 VAC
-
IP Rating
- IP20
- Emergency Operation Time
- ≥90 Minutes
- Battery Type
- LiFePO4
N/A -
Color Options
-
3
Emergency Battery Backup and Driver - 20W - 100-277V Input - 25-50 VDC Output
ShowHide specs
-
Color Options
- Volts
- 100-277 VAC
-
IP Rating
- IP65
- Emergency Operation Time
- ≥90 Minutes
- Battery Type
- Li-ion
N/A -
Color Options
-
4
Emergency Battery Backup Inverter - 8W - 100-347V Input - 170 VDC Output
ShowHide specs
-
Color Options
- Volts
- 100-347 VAC
-
IP Rating
- IP65
- Emergency Operation Time
- ≥90 Minutes
- Battery Type
- Li-ion
N/A -
Color Options
-
5
Emergency Battery Backup Inverter - 40W - 100-347V Input - 170 VDC Output
ShowHide specs
-
Color Options
- Volts
- 100-347 VAC
-
IP Rating
- IP65
- Emergency Operation Time
- ≥90 Minutes
- Battery Type
- Li-ion
N/A -
Color Options
-
6
Emergency Battery Backup Inverter - 25W - 100-347V Input - 170 VDC Output
ShowHide specs
-
Color Options
- Volts
- 100-347 VAC
-
IP Rating
- IP65
- Emergency Operation Time
- ≥90 Minutes
- Battery Type
- Li-ion
N/A -
Color Options
-
7
LED UFO High Bay Emergency Battery Backup - 40W - 100-347 Input - 170 VDC Output
ShowHide specs
-
Color Options
- Volts
- 100-347 VAC
-
IP Rating
- IP65
- Emergency Operation Time
- ≥90 Minutes
- Battery Type
- Li-ion
N/A -
Color Options
-
8
Slim Profile Emergency Backup Driver and Battery - 7W - 30-60 VDC Output - BLD-YT08D-XXX
ShowHide specs
-
Color Options
- Volts
- 100-347 VAC
-
IP Rating
- IP20
- Emergency Operation Time
- ≥90 Minutes
- Battery Type
- Li-ion
N/A -
Color Options
-
9
DiodeDrive Emergency Backup LED Driver - Constant Current - 20W - 15-55 VDC Output - 120-277V Input
ShowHide specs
-
Color Options
- Volts
- N/A
-
IP Rating
- IP30
- Emergency Operation Time
- N/A
- Battery Type
- 9.6 V LiFePO4
N/A -
Color Options
-
10
Green Creative 23W Emergency LED Driver - Title 20 Compliant - 120 / 277 VAC
ShowHide specs
-
Color Options
- Volts
- 120-277 VAC
-
IP Rating
- IP30
- Emergency Operation Time
- ≥90 Minutes
- Battery Type
- Li-ion
N/A -
Color Options
Are you having trouble finding something?
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Super Bright LEDs administers all warranty claims in-house. Read More
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Listed label means that product samples have been tested by UL and that the product meets their Standards for Safety requirements.
This product meets California Energy Commission (CEC) Title 20 requirements and is registered in their Modernized Appliance Efficiency Database System (MAEDbS).
Filter
Types of Emergency Lighting
Exit Signs
Exit signs provide a clear and visible indication of where the nearest exits are located. These signs feature the word "EXIT" in illuminated letters and typically display an arrow pointing in the direction of the exit. The light color in these signs may be either red or green, although a certain color may be required by building or local codes. Exit signs are typically used in tandem with emergency lights.
Emergency Lights
Emergency lights are designed to provide enough essential illumination in the event of a power outage to safely guide occupants out of the building. These fixtures can be mounted to the wall or the ceiling. Emergency lights are used in addition to exit signs to mark the clear pathway to the nearest exit.
Combo Lights
Combination emergency signs serve a dual purpose by providing both illumination and directional guidance during emergencies. These lighted fixtures integrate exit signage with built-in emergency lighting. The “EXIT” lettering can be either red or green.
Durable Fixtures: Wet Location Rated, Flame-Retardant, and Explosion Proof Housing
As emergency lights are intended to provide light during emergency situations, they must also be built to withstand a variety of elements. Exit signs and lights made from flame-retardant thermoplastic will suppress or delay the fixture’s ignition when exposed to heat or flames. This is particularly useful in the case of a fire or extreme heat.
Emergency fixtures with an IP65 rating and above are built to withstand dust and water. Wet environments or areas near fire sprinklers should utilize wet location-rated emergency lights to ensure the lighting functions properly during an emergency.
Class 1 Division 2 locations, or areas where hazardous materials may be present, require the use of explosion-proof lighting. These locations have an increased risk of fire or explosion due to the materials being handled. Explosion-proof emergency lighting is specifically designed to prevent the intrusion of any hazardous gasses and vapors to ensure the lights stay operational.
Reliable Battery Backups
The NFPA (National Fire Protection Association) Life Safety Code requires that all emergency illumination must stay on for a minimum of 90 minutes in the event of a power outage. However, other commercial lighting fixtures, such as high bays, strip fixtures, and downlights, may not have integrated emergency backup. Adding an emergency battery backup to these light fixtures ensures they will remain “On” in the event of a power failure. Our battery backups meet various standards including UL 924 and CEC Title 20 regulations to ensure compliance with local and national safety codes.
UL 924 Requirements
The Underwriters Laboratories (UL) is an independent safety testing agency that tests, inspects, and certifies products for compliance with safety standards. One of the critical standards established by UL is UL 924, which sets forth standards for emergency lighting systems. UL 924 requires that all emergency lights and signs must meet the following requirements:
- Exit and safety lights must provide a minimum luminance of 0.06 ft. lamberts and be seen from at least 100 feet away
- All emergency fixtures must deliver 90+ minutes of emergency lighting on a full charge
- The fixtures must be constructed of flame-retardant thermoplastic
- The lettering must be at least six inches tall and the lettering thickness must be at least .75” wide
All of our emergency signs and lights are UL 924 listed.
NYC Compliance Regulations
New York City has its own code for lighted exit signs. These fixtures must meet the NEC (National Electrical Code) requirements listed below:
- The word “EXIT” and the internal lighting of the sign must be red
- The lettering must be 8 inches tall and the lettering thickness must be 1 inch
- The average initial brightness must be a minimum of 250 ft. lamberts
- Internally lighted signs must have a background of stenciled metal in light gray or white, or translucent materials with white separators
We carry a line of NYC-compliant exit signs, emergency lights, and combo lights.