Refine Results

Water Resistance

Help

LED Landscape Flood Lights

Landscape LED flood lights are available in many wattages and intensities with adjustable U brackets or knuckle mounts. They emit wide viewing angles for large-scale applications, such as wall wash, billboard, security, and tree lighting.

10 of 31 Results
Show Details
Available LED Colors
Brightness
3500 lm
Comparable Wattage
100 Watts Metal-Halide
Beam Angle
 110 degree 
Volts
IP Rating
 Weatherproof IP65 
Total Power Consumption(Max)
32 Watts
Dimmable
Wire Length
50in(127cm)
Material
Aluminum
Special Features
Built in Bracket, Compact
Connection Type
Pigtail
This LED flood light emits a wide 110° beam of cool, natural, or warm white illumination for landscape lighting, parking lot lighting, tree uplighting, flagpole lighting, and architectural wall washing. The 30-watt LED light typically consumes 32 total watts at 120 volts due to the combination of all internal components. It replaces 100-watt metal-halide (MH) lights with comparable output. The weatherproof LED fixture is constructed of heavy-duty die cast aluminum with an integral heat sink and a tempered glass lens. This LED flood light is also equipped with a UL-Recognized constant-current driver. An adjustable mounting bracket allows you to direct illumination where it's needed. The LED flood light is designed to last 3 times longer than MH fixtures.
In Stock
Was $59.95
Now $54.95 ea.
Volume price as low as $41.21
Super Bright LEDs, Inc. offers a 7-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
Products that are LM-79 certified have been tested for photometric and electrical data by an Environmental Protection Agency (EPA) recognized laboratory. The Illuminating Engineering Society of North America (IES) created LM-79-08—Approved Method: Electrical and Photometric Measurements of Solid-State Lighting Products—to establish guidelines and procedures for the testing of solid-state lighting (SSL) products such as LED fixtures. Procedures are listed for luminous flux, electrical power, luminous intensity distribution, and chromaticity. See documentation section under specifications for available report.
A product that bears an ETL-Certified label has been evaluated by a Nationally Recognized Testing Laboratory (NRTL) and meets national product safety standards. An ETL certification is accepted in the U.S. and in Canada.
Standards Australia (SAA) is a company that establishes guidelines and rules known as Standards. In an effort to create a sustainable environment, these Standards are designed to ensure that products are safe and function consistently. Products with an SAA label were tested and comply with set Standards.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

Was $59.95
Now $54.95 ea.
  • Part Number:
View More Information
Make Your Selections
Show Details
LED Color
Brightness
6000 lm
Comparable Wattage
100 Watts Metal-Halide
Beam Angle
 110 degree 
Volts
IP Rating
 Weatherproof IP65 
Total Power Consumption(Max)
50 Watts
Dimmable
Wire Length
7.5in(19cm)
Material
Aluminum, Glass
Special Features
Weatherproof
Connection Type
N/A
This knuckle-mount LED flood light emits 6,000 lumens of natural white illumination. Consuming only 50 watts of power, this energy-efficient LED fixture replaces 100-watt metal-halide (MH) lights with comparable output. The weatherproof LED flood light has a black powder-coated die cast aluminum housing and a tempered glass lens. Its adjustable knuckle-mount bracket allows for illumination where it's needed and easily installs in outdoor junction boxes that have 3/4" threaded hubs. The wide 110° beam pattern is perfect for subdivision sign lighting, business sign lighting, building facade lighting, architectural wall washing, outdoor displays, and security lighting.
In Stock
$44.95 ea.
Volume price as low as $33.71
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Listed label means that product samples have been tested by UL and that the product meets their Standards for Safety requirements.
Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$44.95 ea.
  • Part Number:
View More Information
Make Your Selections
Show Details
LED Color
Brightness
3600 lm
Comparable Wattage
100 Watts Metal-Halide
Beam Angle
 110 degree 
Volts
IP Rating
 Weatherproof IP65 
Total Power Consumption(Max)
30 Watts
Dimmable
Wire Length
7.5in(19cm)
Material
Aluminum, Glass
Special Features
Weatherproof
Connection Type
N/A
This knuckle-mount LED flood light emits 3,600 lumens of natural white illumination. Consuming only 30 watts of power, the energy-efficient LED fixture replaces 100-watt metal-halide (MH) lights with comparable output. The weatherproof LED flood light has a black powder-coated die cast aluminum housing and a tempered glass lens. Its adjustable knuckle-mount bracket allows for illumination where it's needed and easily installs in outdoor junction boxes that have 3/4" threaded hubs. The wide 110° beam pattern is perfect for subdivision sign lighting, business sign lighting, building facade lighting, architectural wall washing, outdoor displays, and security lighting.
In Stock
$34.95 ea.
Volume price as low as $26.21
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Listed label means that product samples have been tested by UL and that the product meets their Standards for Safety requirements.
Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$34.95 ea.
  • Part Number:
View More Information
Make Your Selections
Show Details
LED Color
Brightness
2200 lm
Comparable Wattage
50 Watts Metal-Halide
Beam Angle
 110 degree 
Volts
IP Rating
 Weatherproof IP65 
Total Power Consumption(Max)
20 Watts
Dimmable
Wire Length
7.5in(19cm)
Material
Aluminum, Glass
Special Features
Weatherproof
Connection Type
N/A
This knuckle-mount LED flood light emits 2,200 lumens of natural white illumination. Consuming only 20 watts of power, the energy-efficient LED fixture replaces 50-watt metal-halide (MH) lights with comparable output. The weatherproof LED flood light has a black powder-coated die cast aluminum housing and a tempered glass lens. Its adjustable knuckle-mount bracket allows for illumination where it's needed and easily installs in outdoor junction boxes that have 3/4" threaded hubs. The wide 110° beam pattern is perfect for subdivision sign lighting, business sign lighting, building facade lighting, architectural wall washing, outdoor displays, and security lighting.
In Stock
$24.95 ea.
Volume price as low as $18.71
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Listed label means that product samples have been tested by UL and that the product meets their Standards for Safety requirements.
Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$24.95 ea.
  • Part Number:
View More Information
Make Your Selections
Show Details
LED Color
Brightness
6980 lm
Comparable Wattage
175 Watts Metal-Halide
Beam Angle
 80 degree 
Volts
IP Rating
 Weatherproof IP65 
Total Power Consumption(Max)
68 Watts
Dimmable
N/A
Wire Length
10in(25.4cm)
Material
Aluminum
Special Features
N/A
Connection Type
N/A
Knuckle-mount LED flood lights are designed for subdivision sign lighting, business sign lighting, billboard lighting, building facade lighting, architectural wall washing, outdoor displays, and security lighting. Consuming only 70 watts of power, this energy-efficient LED fixture replaces 175-watt metal-halide (MH) lights with comparable output. The flood light fixture uses 72 powerful Philips LEDs (groups of 9) and individual projector lenses to emit 6,800 lumens of illumination in a focused 80° beam pattern. This weatherproof LED flood light is constructed of dark bronze die cast aluminum with a polycarbonate outer lens and has an adjustable knuckle-mount bracket for illumination where it's needed. Easily installs in outdoor junction boxes that have 1/2" threaded hubs. See similar 45-watt version.
In Stock
$129.95 ea.
Volume price as low as $97.46
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Listed label means that product samples have been tested by UL and that the product meets their Standards for Safety requirements.
The DesignLights Consortium® (DLC®) partners with energy-efficiency groups and utility companies to establish a set of standards for commercial LED light fixtures. The product is tested and must meet quality, energy-efficiency, and performance requirements to be added to the DLC's Qualified Products List. For more information, click here. To view all of our DLC® listed products, click here
Products that are LM-79 certified have been tested for photometric and electrical data by an Environmental Protection Agency (EPA) recognized laboratory. The Illuminating Engineering Society of North America (IES) created LM-79-08—Approved Method: Electrical and Photometric Measurements of Solid-State Lighting Products—to establish guidelines and procedures for the testing of solid-state lighting (SSL) products such as LED fixtures. Procedures are listed for luminous flux, electrical power, luminous intensity distribution, and chromaticity. See documentation section under specifications for available report.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$129.95 ea.
  • Part Number:
View More Information
Make Your Selections
6.
HPAL-x150-BP9
Show Details
Available LED Colors
Brightness
20000 lm
Comparable Wattage
600 Watt HID
Beam Angle
 90 degree 
Volts
IP Rating
 Weatherproof IP66 
Total Power Consumption(Max)
160 Watts
Dimmable
Wire Length
N/A
Material
Aluminum
Special Features
N/A
Connection Type
Pigtail
Perfect for parking lot lighting, high-bay lighting, street lighting, car dealerships, stadiums, tunnel lighting, outdoor sports areas, campuses, and parks—this LED area light shines brightly when reliability and performance are critical. Using 3 groups of LEDs, the area light emits 20,000 lumens of powerful cool white or warm white illumination in a 90° beam pattern. Because of their warmer color temperatures, these area lights minimize glare and light pollution while reducing skyglow. The area light is comparable to a 600-watt HID (high-intensity discharge) fixture while only consuming 160 watts. And with a life expectancy that's 5 times longer than HID fixtures, the LED light reduces costly repairs and the need for replacements. A weatherproof brown aluminum alloy housing protects internal components and is powder coated to resist rust. Shock- and UV-resistant polycarbonate lenses protect LEDs. The durable LED fixture comes with an adjustable bracket or can be used with one of many mounting options (sold separately) for walls, ceilings, round or square poles, and suspended chain installation. This LED area light is equipped with a constant-current driver and operates within a wide 100-277V AC range.
In Stock
$279.95 ea.
Volume price as low as $209.96
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
The DesignLights Consortium® (DLC®) partners with energy-efficiency groups and utility companies to establish a set of standards for commercial LED light fixtures. The product is tested and must meet quality, energy-efficiency, and performance requirements to be added to the DLC's Qualified Products List. For more information, click here. To view all of our DLC® listed products, click here
Products that are LM-79 certified have been tested for photometric and electrical data by an Environmental Protection Agency (EPA) recognized laboratory. The Illuminating Engineering Society of North America (IES) created LM-79-08—Approved Method: Electrical and Photometric Measurements of Solid-State Lighting Products—to establish guidelines and procedures for the testing of solid-state lighting (SSL) products such as LED fixtures. Procedures are listed for luminous flux, electrical power, luminous intensity distribution, and chromaticity.

See documentation section under specifications for available report.

Products that are LM-80 certified have been tested for lumen depreciation by an Environmental Protection Agency (EPA) recognized laboratory. The Illuminating Engineering Society of North America (IES) created LM-80-08 to establish guidelines and procedures for the testing of solid-state lighting (SSL) products, such as LED packages, modules, and arrays (not complete fixtures). Procedures are listed for testing lumen maintenance over a period of time.

See documentation section under specifications for available report.
A product that bears an ETL-Certified label has been evaluated by a Nationally Recognized Testing Laboratory (NRTL) and meets national product safety standards. An ETL certification is accepted in the U.S. and in Canada.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$279.95 ea.
  • Part Number:
View More Information
Make Your Selections
Show Details
Available LED Colors
Brightness
25000 lm
Comparable Wattage
750 Watts HID
Beam Angle
 110 degree 
Volts
IP Rating
 Weatherproof IP65 
Total Power Consumption(Max)
209 Watts
Dimmable
Wire Length
50in(127cm)
Material
Aluminum
Special Features
Built in Bracket, Compact
Connection Type
Pigtail
This LED flood light emits a wide 110° beam of cool, natural, or warm white illumination for landscape lighting, parking lot lighting, tree uplighting, flagpole lighting, and architectural wall washing. The powerful LED fixture emits 25,000 lumens for ample outdoor illumination and operates within a wide 90-277 VAC range. At 120 volts, the 200-watt LED light typically consumes 209 total watts due to the combination of all internal components. It replaces 750-watt high-intensity discharge (HID) lights with comparable output. The weatherproof LED fixture is constructed of heavy-duty die cast aluminum with an integral heat sink and a tempered glass lens. This LED flood light is also equipped with a UL-Recognized constant-current driver. An adjustable mounting bracket allows you to direct illumination where it's needed. The LED fixture is designed to last 3 times longer than HID fixtures.
In Stock
$299.95 ea.
Volume price as low as $224.96
Super Bright LEDs, Inc. offers a 7-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
Products that are LM-79 certified have been tested for photometric and electrical data by an Environmental Protection Agency (EPA) recognized laboratory. The Illuminating Engineering Society of North America (IES) created LM-79-08—Approved Method: Electrical and Photometric Measurements of Solid-State Lighting Products—to establish guidelines and procedures for the testing of solid-state lighting (SSL) products such as LED fixtures. Procedures are listed for luminous flux, electrical power, luminous intensity distribution, and chromaticity. See documentation section under specifications for available report.
A product that bears an ETL-Certified label has been evaluated by a Nationally Recognized Testing Laboratory (NRTL) and meets national product safety standards. An ETL certification is accepted in the U.S. and in Canada.
Standards Australia (SAA) is a company that establishes guidelines and rules known as Standards. In an effort to create a sustainable environment, these Standards are designed to ensure that products are safe and function consistently. Products with an SAA label were tested and comply with set Standards.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$299.95 ea.
  • Part Number:
View More Information
Make Your Selections
Show Details
Available LED Colors
Brightness
5600 lm
Comparable Wattage
100 Watts Metal-Halide
Beam Angle
 110 degree 
Volts
IP Rating
 Weatherproof IP65 
Total Power Consumption(Max)
54 Watts
Dimmable
Wire Length
50in(127cm)
Material
Aluminum
Special Features
Built in Bracket, Compact
Connection Type
Pigtail
This LED flood light emits a wide 110° beam of cool, natural, or warm white illumination for landscape lighting, parking lot lighting, tree uplighting, flagpole lighting, and architectural wall washing. The LED fixture emits 5,600 lumens for ample outdoor illumination and operates within a wide 100-277 VAC range. At 120 volts, the 50-watt LED light typically consumes 54 total watts due to the combination of all internal components. It replaces 100-watt metal-halide (MH) lights with comparable output. The weatherproof fixture is constructed of heavy-duty die cast aluminum with an integral heat sink and a tempered glass lens. This LED flood light is also equipped with a UL-Recognized constant-current driver. An adjustable mounting bracket allows you to direct illumination where it's needed. The LED fixture is designed to last 3 times longer than MH fixtures.
In Stock
Was $89.95
Now $79.95 ea.
Volume price as low as $59.96
Super Bright LEDs, Inc. offers a 7-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
Products that are LM-79 certified have been tested for photometric and electrical data by an Environmental Protection Agency (EPA) recognized laboratory. The Illuminating Engineering Society of North America (IES) created LM-79-08—Approved Method: Electrical and Photometric Measurements of Solid-State Lighting Products—to establish guidelines and procedures for the testing of solid-state lighting (SSL) products such as LED fixtures. Procedures are listed for luminous flux, electrical power, luminous intensity distribution, and chromaticity. See documentation section under specifications for available report.
A product that bears an ETL-Certified label has been evaluated by a Nationally Recognized Testing Laboratory (NRTL) and meets national product safety standards. An ETL certification is accepted in the U.S. and in Canada.
Standards Australia (SAA) is a company that establishes guidelines and rules known as Standards. In an effort to create a sustainable environment, these Standards are designed to ensure that products are safe and function consistently. Products with an SAA label were tested and comply with set Standards.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

Was $89.95
Now $79.95 ea.
  • Part Number:
View More Information
Make Your Selections
9.
SLKM-x28-60-120V
Show Details
LED Color
Brightness
2800 lm
Comparable Wattage
50 Watts Metal-Halide
Beam Angle
 60 degree 
Volts
IP Rating
 Weatherproof IP65 
Total Power Consumption(Max)
28 Watts
Dimmable
N/A
Wire Length
6in(15.2cm)
Material
Aluminum
Special Features
N/A
Connection Type
N/A
Knuckle-mount LED spotlights/LED flood lights are designed for subdivision sign lighting, business sign lighting, landscape lighting, building facade lighting, architectural wall washing, outdoor displays, flagpole lighting, and security lighting. Consuming only 28 watts of power, this energy-efficient LED bullet light fixture replaces 50-watt metal-halide (MH) fixtures with comparable light output. The flood light fixture emits 2,800 lumens of cool white illumination in a focused 60° beam pattern. This weatherproof LED flood light is constructed of dark bronze die cast aluminum with a polycarbonate lens and has an adjustable knuckle-mount bracket for illumination where it's needed. Easily installs in outdoor junction boxes that have 1/2" threaded hubs and operates within a 100-277 VAC range.
In Stock
$69.95 ea.
Volume price as low as $52.46
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Listed label means that product samples have been tested by UL and that the product meets their Standards for Safety requirements.
The DesignLights Consortium® (DLC®) partners with energy-efficiency groups and utility companies to establish a set of standards for commercial LED light fixtures. The product is tested and must meet quality, energy-efficiency, and performance requirements to be added to the DLC's Qualified Products List. For more information, click here. To view all of our DLC® listed products, click here
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$69.95 ea.
  • Part Number:
View More Information
Make Your Selections
10.
Show Details
LED Color
Brightness
4770 lm
Comparable Wattage
100 Watts Metal-Halide
Beam Angle
 80 degree 
Volts
IP Rating
 Weatherproof IP65 
Total Power Consumption(Max)
45 Watts
Dimmable
N/A
Wire Length
10in(25.4cm)
Material
Aluminum
Special Features
N/A
Connection Type
N/A
Knuckle-mount LED flood lights are designed for subdivision sign lighting, business sign lighting, billboard lighting, building facade lighting, architectural wall washing, outdoor displays, and security lighting. Consuming only 45 watts of power, this energy-efficient LED fixture replaces 100-watt metal-halide (MH) lights with comparable output. The flood light fixture uses 48 powerful Philips LEDs (groups of 9) and individual projector lenses to emit 4,600 lumens of illumination in a focused 80° beam pattern. This weatherproof LED flood light is constructed of dark bronze die cast aluminum with a polycarbonate outer lens and has an adjustable knuckle-mount bracket for illumination where it's needed. Easily installs in outdoor junction boxes that have 1/2" threaded hubs. See similar 68-watt version.
In Stock
$109.95 ea.
Volume price as low as $82.46
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Listed label means that product samples have been tested by UL and that the product meets their Standards for Safety requirements.
The DesignLights Consortium® (DLC®) partners with energy-efficiency groups and utility companies to establish a set of standards for commercial LED light fixtures. The product is tested and must meet quality, energy-efficiency, and performance requirements to be added to the DLC's Qualified Products List. For more information, click here. To view all of our DLC® listed products, click here
Products that are LM-79 certified have been tested for photometric and electrical data by an Environmental Protection Agency (EPA) recognized laboratory. The Illuminating Engineering Society of North America (IES) created LM-79-08—Approved Method: Electrical and Photometric Measurements of Solid-State Lighting Products—to establish guidelines and procedures for the testing of solid-state lighting (SSL) products such as LED fixtures. Procedures are listed for luminous flux, electrical power, luminous intensity distribution, and chromaticity. See documentation section under specifications for available report.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$109.95 ea.
  • Part Number:
View More Information
Make Your Selections
10 of 31 Results

Send us your Feedback