Currently Shopping By...

LED Flood Lights

Currently Refining By: Series: Compact Remove All

You may also be looking for...

10 of 10 Results
of 1
1.
Show Details
Brightness
1000 lm
Beam Angle
 120 degree 
Comparable Wattage
95-100 Watts
Volts
IP Rating
 Weatherproof IP65 
Total Power Consumption(Max)
47 Watts
Warranty
3 Years
This compact RGBW LED flood light emits a wide 120° beam pattern of white and multicolored illumination for landscape lighting, tree uplighting, exterior accent lighting, and architectural wall washing. Using an RGB COB (chips-on-board) LED along with either a cool white or warm white LED, the powerful flood light emits up to 1,100 lumens for ample outdoor illumination. The Wi-Fi-compatible flood light can be controlled with a RF Touch-Color Remote (sold separately) or with a Wi-Fi Hub (sold separately) and controlled using a smartphone or tablet. Precise color and brightness selection are available along with 9 dynamic color-changing modes with speed control.

The LED light consumes 19-47 watts depending upon color selection. It replaces 100-watt incandescent fixtures with comparable output. The weatherproof LED fixture has a low-profile die cast aluminum housing with an integral heat sink and a tempered glass lens. An adjustable mounting bracket allows you to direct illumination where it's needed. The LED flood light operates within a wide 100-240V AC range and is designed to last 35,000 hours—29 times longer than incandescent fixtures. See all Compact Series LED floodlights and similar 30-watt fixture.
In Stock
Starting at $149.95 ea.
Super Bright LEDs, Inc. offers a 3-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

Starting at $149.95 ea.
  • Part Number:
View More Information
Make Your Selections
Show Details
Available LED Colors
Brightness
5600 lm
Beam Angle
 110 degree 
Comparable Wattage
560 Watts
Volts
IP Rating
 Weatherproof IP65 
Total Power Consumption(Max)
54 Watts
Warranty
7 Years
This LED flood light emits a wide 110° beam of cool, natural, or warm white illumination for landscape lighting, parking lot lighting, tree uplighting, flagpole lighting, and architectural wall washing. The LED fixture emits 5,600 lumens for ample outdoor illumination and operates within a wide 100-277 VAC range. At 120 volts, the 50-watt LED light typically consumes 54 total watts due to the combination of all internal components. It replaces 250-watt metal-halide (MH) lights and 560-watt incandescent fixtures with comparable output. The weatherproof fixture is constructed of heavy-duty die cast aluminum with an integral heat sink and a tempered glass lens. This LED flood light is also equipped with a UL-Recognized constant-current driver. An adjustable mounting bracket allows you to direct illumination where it's needed. The LED fixture is designed to last 3 times longer than MH fixtures.
In Stock
$119.95 ea.
Super Bright LEDs, Inc. offers a 7-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
Products that are LM-79 certified have been tested for photometric and electrical data by an Environmental Protection Agency (EPA) recognized laboratory. The Illuminating Engineering Society of North America (IES) created LM-79-08—Approved Method: Electrical and Photometric Measurements of Solid-State Lighting Products—to establish guidelines and procedures for the testing of solid-state lighting (SSL) products such as LED fixtures. Procedures are listed for luminous flux, electrical power, luminous intensity distribution, and chromaticity. See documentation section under specifications for available report.
A product that bears an ETL-Certified label has been evaluated by a Nationally Recognized Testing Laboratory (NRTL) and meets national product safety standards. An ETL certification is accepted in the U.S. and in Canada.
Standards Australia (SAA) is a company that establishes guidelines and rules known as Standards. In an effort to create a sustainable environment, these Standards are designed to ensure that products are safe and function consistently. Products with an SAA label were tested and comply with set Standards.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$119.95 ea.
  • Part Number:
View More Information
Make Your Selections
Show Details
Available LED Colors
Brightness
3500 lm
Beam Angle
 110 degree 
Comparable Wattage
350 Watts
Volts
IP Rating
 Weatherproof IP65 
Total Power Consumption(Max)
32 Watts
Warranty
7 Years
This LED flood light emits a wide 110° beam of cool, natural, or warm white illumination for landscape lighting, parking lot lighting, tree uplighting, flagpole lighting, and architectural wall washing. The 30-watt LED light typically consumes 32 total watts at 120 volts due to the combination of all internal components. It replaces 175-watt metal-halide (MH) lights and 350-watt incandescent fixtures with comparable output. The weatherproof LED fixture is constructed of heavy-duty die cast aluminum with an integral heat sink and a tempered glass lens. This LED flood light is also equipped with a UL-Recognized constant-current driver. An adjustable mounting bracket allows you to direct illumination where it's needed. The LED flood light is designed to last 42 times longer than incandescent fixtures.
In Stock
$79.95 ea.
Super Bright LEDs, Inc. offers a 7-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
Products that are LM-79 certified have been tested for photometric and electrical data by an Environmental Protection Agency (EPA) recognized laboratory. The Illuminating Engineering Society of North America (IES) created LM-79-08—Approved Method: Electrical and Photometric Measurements of Solid-State Lighting Products—to establish guidelines and procedures for the testing of solid-state lighting (SSL) products such as LED fixtures. Procedures are listed for luminous flux, electrical power, luminous intensity distribution, and chromaticity. See documentation section under specifications for available report.
A product that bears an ETL-Certified label has been evaluated by a Nationally Recognized Testing Laboratory (NRTL) and meets national product safety standards. An ETL certification is accepted in the U.S. and in Canada.
Standards Australia (SAA) is a company that establishes guidelines and rules known as Standards. In an effort to create a sustainable environment, these Standards are designed to ensure that products are safe and function consistently. Products with an SAA label were tested and comply with set Standards.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$79.95 ea.
  • Part Number:
View More Information
Make Your Selections
Show Details
Available LED Colors
Brightness
25000 lm
Beam Angle
 110 degree 
Comparable Wattage
2500 Watts
Volts
IP Rating
 Weatherproof IP65 
Total Power Consumption(Max)
209 Watts
Warranty
7 Years
This LED flood light emits a wide 110° beam of cool, natural, or warm white illumination for landscape lighting, parking lot lighting, tree uplighting, flagpole lighting, and architectural wall washing. The powerful LED fixture emits 25,000 lumens for ample outdoor illumination and operates within a wide 90-277 VAC range. At 120 volts, the 200-watt LED light typically consumes 209 total watts due to the combination of all internal components. It replaces 1,000-watt high-intensity discharge (HID) lights or 2,500-watt incandescent fixtures with comparable output. The weatherproof LED fixture is constructed of heavy-duty die cast aluminum with an integral heat sink and a tempered glass lens. This LED flood light is also equipped with a UL-Recognized constant-current driver. An adjustable mounting bracket allows you to direct illumination where it's needed. The LED fixture is designed to last 3 times longer than HID fixtures.
In Stock
$349.95 ea.
Super Bright LEDs, Inc. offers a 7-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
Products that are LM-79 certified have been tested for photometric and electrical data by an Environmental Protection Agency (EPA) recognized laboratory. The Illuminating Engineering Society of North America (IES) created LM-79-08—Approved Method: Electrical and Photometric Measurements of Solid-State Lighting Products—to establish guidelines and procedures for the testing of solid-state lighting (SSL) products such as LED fixtures. Procedures are listed for luminous flux, electrical power, luminous intensity distribution, and chromaticity. See documentation section under specifications for available report.
A product that bears an ETL-Certified label has been evaluated by a Nationally Recognized Testing Laboratory (NRTL) and meets national product safety standards. An ETL certification is accepted in the U.S. and in Canada.
Standards Australia (SAA) is a company that establishes guidelines and rules known as Standards. In an effort to create a sustainable environment, these Standards are designed to ensure that products are safe and function consistently. Products with an SAA label were tested and comply with set Standards.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$349.95 ea.
  • Part Number:
View More Information
Make Your Selections
Show Details
Available LED Colors
Brightness
12400 lm
Beam Angle
 110 degree 
Comparable Wattage
1200 Watts
Volts
IP Rating
 Weatherproof IP65 
Total Power Consumption(Max)
98 Watts
Warranty
7 Years
This LED flood light emits a wide 110° beam of cool, natural, or warm white illumination for landscape lighting, parking lot lighting, tree uplighting, flagpole lighting, and architectural wall washing. The powerful LED light emits 12,000 lumens for ample outdoor illumination and operates within a wide 90-277 VAC range. At 120 volts, the LED light consumes just 96 watts of power; the flood light is capable of being driven at 100 watts. It replaces 550-watt high-intensity discharge (HID) lights or 1,200-watt incandescent fixtures with comparable output. The weatherproof LED fixture is constructed of heavy-duty die cast aluminum with an integral heat sink and a tempered glass lens. This LED flood light is also equipped with a UL-Recognized constant-current driver. An adjustable mounting bracket allows you to direct illumination where it's needed. The LED fixture is designed to last 3 times longer than HID fixtures.
In Stock
$229.95 ea.
Super Bright LEDs, Inc. offers a 7-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
Products that are LM-79 certified have been tested for photometric and electrical data by an Environmental Protection Agency (EPA) recognized laboratory. The Illuminating Engineering Society of North America (IES) created LM-79-08—Approved Method: Electrical and Photometric Measurements of Solid-State Lighting Products—to establish guidelines and procedures for the testing of solid-state lighting (SSL) products such as LED fixtures. Procedures are listed for luminous flux, electrical power, luminous intensity distribution, and chromaticity. See documentation section under specifications for available report.
A product that bears an ETL-Certified label has been evaluated by a Nationally Recognized Testing Laboratory (NRTL) and meets national product safety standards. An ETL certification is accepted in the U.S. and in Canada.
Standards Australia (SAA) is a company that establishes guidelines and rules known as Standards. In an effort to create a sustainable environment, these Standards are designed to ensure that products are safe and function consistently. Products with an SAA label were tested and comply with set Standards.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$229.95 ea.
  • Part Number:
View More Information
Make Your Selections
Show Details
Available LED Colors
Brightness
18000 lm
Beam Angle
 110 degree 
Comparable Wattage
1800 Watts
Volts
IP Rating
 Weatherproof IP65 
Total Power Consumption(Max)
150 Watts
Warranty
7 Years
This LED flood light emits a wide 110° beam of cool, natural, or warm white illumination for landscape lighting, parking lot lighting, tree uplighting, flagpole lighting, and architectural wall washing. The powerful LED fixture emits 18,000 lumens for ample outdoor illumination and operates within a wide 90-277 VAC range. Consuming only 150 watts of power at 120 volts, this energy-efficient LED fixture replaces 800-watt high-intensity discharge (HID) lights or 1,800-watt incandescent fixtures with comparable output. The weatherproof LED fixture is constructed of heavy-duty die cast aluminum with an integral heat sink and a tempered glass lens. This LED flood light is also equipped with a UL-Recognized constant-current driver. An adjustable mounting bracket allows you to direct illumination where it's needed. The LED fixture is designed to last 3 times longer than HID fixtures.
In Stock
$279.95 ea.
Super Bright LEDs, Inc. offers a 7-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
Products that are LM-79 certified have been tested for photometric and electrical data by an Environmental Protection Agency (EPA) recognized laboratory. The Illuminating Engineering Society of North America (IES) created LM-79-08—Approved Method: Electrical and Photometric Measurements of Solid-State Lighting Products—to establish guidelines and procedures for the testing of solid-state lighting (SSL) products such as LED fixtures. Procedures are listed for luminous flux, electrical power, luminous intensity distribution, and chromaticity. See documentation section under specifications for available report.
A product that bears an ETL-Certified label has been evaluated by a Nationally Recognized Testing Laboratory (NRTL) and meets national product safety standards. An ETL certification is accepted in the U.S. and in Canada.
Standards Australia (SAA) is a company that establishes guidelines and rules known as Standards. In an effort to create a sustainable environment, these Standards are designed to ensure that products are safe and function consistently. Products with an SAA label were tested and comply with set Standards.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$279.95 ea.
  • Part Number:
View More Information
Make Your Selections
Show Details
Available LED Colors
Brightness
9300 lm
Beam Angle
 110 degree 
Comparable Wattage
930 Watts
Volts
IP Rating
 Weatherproof IP65 
Total Power Consumption(Max)
80 Watts
Warranty
7 Years
This LED flood light emits a wide 110° beam of cool, natural, or warm white illumination for landscape lighting, parking lot lighting, tree uplighting, flagpole lighting, and architectural wall washing. The LED fixture emits 9,300 lumens for ample outdoor illumination and operates within a wide 90-277 VAC range. Consuming only 80 watts of power at 120 volts, this energy-efficient LED fixture replaces 400-watt metal-halide (MH) lights and 930-watt incandescent fixtures with comparable output. The weatherproof LED fixture is constructed of heavy-duty die cast aluminum with an integral heat sink and a tempered glass lens. This flood light is also equipped with a UL-Recognized constant-current driver. An adjustable mounting bracket allows you to direct illumination where it's needed. The LED flood light is designed to last 3 times longer than MH fixtures.
In Stock
$189.95 ea.
Super Bright LEDs, Inc. offers a 7-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
Products that are LM-79 certified have been tested for photometric and electrical data by an Environmental Protection Agency (EPA) recognized laboratory. The Illuminating Engineering Society of North America (IES) created LM-79-08—Approved Method: Electrical and Photometric Measurements of Solid-State Lighting Products—to establish guidelines and procedures for the testing of solid-state lighting (SSL) products such as LED fixtures. Procedures are listed for luminous flux, electrical power, luminous intensity distribution, and chromaticity. See documentation section under specifications for available report.
A product that bears an ETL-Certified label has been evaluated by a Nationally Recognized Testing Laboratory (NRTL) and meets national product safety standards. An ETL certification is accepted in the U.S. and in Canada.
Standards Australia (SAA) is a company that establishes guidelines and rules known as Standards. In an effort to create a sustainable environment, these Standards are designed to ensure that products are safe and function consistently. Products with an SAA label were tested and comply with set Standards.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$189.95 ea.
  • Part Number:
View More Information
Make Your Selections
8.
Show Details
Brightness
760 lm
Beam Angle
 120 degree 
Comparable Wattage
75-80 Watts
Volts
IP Rating
 Weatherproof IP65 
Total Power Consumption(Max)
37 Watts
Warranty
3 Years
This compact RGBW LED flood light emits a wide 120° beam pattern of warm white and multicolored illumination for landscape lighting, tree uplighting, exterior accent lighting, and architectural wall washing. Using a warm white or RGB COB (chips-on-board) LED, the powerful flood light emits up to 760 lumens for ample outdoor illumination. The Wi-Fi-compatible flood light can be controlled with a RF Touch-Color Remote (sold separately) or with a Wi-Fi Hub (sold separately) and controlled using a smartphone or tablet. Precise color and brightness selection are available along with 9 dynamic color-changing modes with speed control.

The LED light consumes 15-37 watts depending upon color selection. It replaces 76-watt incandescent fixtures with comparable output. The weatherproof LED fixture has a low-profile die cast aluminum housing with an integral heat sink and a tempered glass lens. An adjustable mounting bracket allows you to direct illumination where it's needed. The LED flood light operates within a wide 100-240V AC range and is designed to last 35,000 hours—29 times longer than incandescent fixtures. See all Compact Series LED floodlights and similar 50-watt fixture.
In Stock
Starting at $119.95 ea.
Super Bright LEDs, Inc. offers a 3-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

Starting at $119.95 ea.
  • Part Number:
View More Information
Make Your Selections
Show Details
LED Color
Brightness
4300 lm
Beam Angle
 120 degree 
Comparable Wattage
435 Watts
Volts
IP Rating
 Weatherproof IP65 
Total Power Consumption(Max)
50 Watts
Warranty
5 Years
This 50-watt LED flood light emits a wide 120° beam angle of cool white illumination for landscape lighting, parking lot lighting, tree uplighting, flagpole lighting, and architectural wall washing. Using 20 Cree XT-E LEDs, the powerful flood light emits 4,300 lumens for ample outdoor illumination. Consuming only 50 watts of power, this energy-efficient LED fixture replaces 250-watt metal-halide (MH) lights and 435-watt incandescent fixtures with comparable output. The weatherproof LED fixture is constructed of heavy-duty die cast aluminum with an integral heat sink and a tempered glass lens and has a built-in UL-recognized Mean Well constant-current driver. An adjustable mounting bracket allows you to direct illumination where it's needed. The LED flood light operates within a wide 100-277V AC range and is designed to last 50,000 hours—5 times longer than HID fixtures.
In Stock (Clearance)
$99.88 ea.
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Listed label means that product samples have been tested by UL and that the product meets their Standards for Safety requirements.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$99.88 ea.
  • Part Number:
View More Information
Make Your Selections
10.
Show Details
LED Color
Brightness
2200 lm
Beam Angle
 120 degree 
Comparable Wattage
225 Watts
Volts
IP Rating
 Weatherproof IP65 
Total Power Consumption(Max)
30 Watts
Warranty
5 Years
Compact series LED Flood Light Fixture uses high power Philips LUXEON 3535SMD LEDs to produce up to 2200 lumens. The Compact series is ideal for large sign illumination, building facade lighting, and other large architectural structures. Consumes only 30 watts of power. Replaces 100- or 175-watt metal-halide (MH) lights and 225-watt incandescent fixtures with comparable output. 100~295 VAC operation w/ built in UL recognized Mean Well constant current driver. Weatherproof IP65 rating. Reliable compact thermal design. Attached mounting bracket included. Available in Cool White with wide flood 120 degree beam patterns.
In Stock (Clearance)
Was $139.95
Now $74.88 ea.
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Recognized label ensures that a product component, such as a power supply or LED light strip, has been tested and verified as safe to use in a UL-Listed product. UL-Listed product samples are tested by UL and meet their Standards for Safety requirements.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

Was $139.95
Now $74.88 ea.
  • Part Number:
View More Information
Make Your Selections

Are you having trouble finding something?

Let us know what you were searching for or make a suggestion to help improve our search and product selection.

10 of 10 Results
of 1

Send us your Feedback