Currently Shopping By...

Refine Results

Color Temperature
Beam Angle
Water Resistance

LED Landscape Spot & Flood Lights

Currently Refining By: Color: White Remove All
10 of 36 Results
of 4
Show Details
Brightness
250 lm
Comparable Wattage
25-30 Watts
Beam Angle
 90 degree 
Total Power Consumption(Max)
5 Watts
Volts
IP Rating
 Weatherproof IP65 
Dimmable
Wire Length
20.5in(52.07cm)
Special Features
G-LUX Compatible, Plug and Play, Ground Stake
Connection Type
G-LUX, G-LUX Male
LED landscape lights are an energy-efficient solution for architectural lighting, garden lighting, outdoor accent lighting, and sign lighting. This outdoor LED spotlight has 3 COB (chips-on-board) LEDs with an output of up to 250 lumens and emits a 90° spot beam pattern. A weatherproof black or brown aluminum housing protects internal components. Mount the LED spotlight on a wooden surface such as a gazebo, deck, or tree, and use the 220° adjustable base to aim light where it's needed. A 6" ground-mounting spike is also included for tree uplighting or plant accent lighting. The LED light has 12V AC/DC operation and a 1-11/16' power cord with a G-LUX plug-and-play connector for easy installation in a G-LUX landscape wiring system. Can also be used in an existing low-voltage landscape wiring system with a G-LUX pigtail power cable. Available in natural white, warm white, blue, green, amber, and red. See all compatible G-LUX series products and accessories.
Clearance Options Available
Starting at $22.88 ea.
Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

Starting at $22.88 ea.
  • Part Number:
View More Information
Make Your Selections
New Product

30 Watt High Power LED Flood Light Fixture

Compact series
Show Details
Available LED Colors
Brightness
3500 lm
Comparable Wattage
350 Watts
Beam Angle
 120 degree 
Total Power Consumption(Max)
32 Watts
Volts
IP Rating
 Weatherproof IP65 
Dimmable
Wire Length
50in(127cm)
Special Features
Built in Bracket, Compact
Connection Type
Wire Leads
This LED flood light emits a wide 120° beam of warm or natural white illumination for landscape lighting, parking lot lighting, tree uplighting, flagpole lighting, and architectural wall washing. The LED fixture emits 3,500 lumens for ample outdoor illumination and operates within a wide 100-277 VAC range. Consuming only 30 watts of power at 120 volts, this energy-efficient LED fixture replaces 175-watt metal-halide (MH) lights and 350-watt incandescent fixtures with comparable output. The weatherproof LED fixture is constructed of heavy-duty die cast aluminum with an integral heat sink and a tempered glass lens. This LED flood light is also equipped with a UL-Recognized constant-current driver. An adjustable mounting bracket allows you to direct illumination where it's needed. The LED flood light is designed to last 42 times longer than incandescent fixtures.
In Stock
$79.95 ea.
Super Bright LEDs, Inc. offers a 7-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted.
A product that bears an ETL-Certified label has been evaluated by a Nationally Recognized Testing Laboratory (NRTL) and meets national product safety standards. An ETL certification is accepted in the U.S. and in Canada.
Standards Australia (SAA) is a company that establishes guidelines and rules known as Standards. In an effort to create a sustainable environment, these Standards are designed to ensure that products are safe and function consistently. Products with an SAA label were tested and comply with set Standards.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
Products that are LM-79 certified have been tested for photometric and electrical data by an Environmental Protection Agency (EPA) recognized laboratory. The Illuminating Engineering Society of North America (IES) created LM-79-08—Approved Method: Electrical and Photometric Measurements of Solid-State Lighting Products—to establish guidelines and procedures for the testing of solid-state lighting (SSL) products such as LED fixtures. Procedures are listed for luminous flux, electrical power, luminous intensity distribution, and chromaticity. See documentation section under specifications for available report.
The DesignLights Consortium® (DLC®) partners with energy-efficiency groups and utility companies to establish a set of standards for commercial LED light fixtures. The product is tested and must meet quality, energy-efficiency, and performance requirements to be added to the DLC's Qualified Products List. For more information, click here.
$79.95 ea.
  • Part Number:
View More Information
Make Your Selections
New Product

50 Watt High Power LED Flood Light Fixture

Compact series
Show Details
Available LED Colors
Brightness
5600 lm
Comparable Wattage
560 Watts
Beam Angle
 120 degree 
Total Power Consumption(Max)
54 Watts
Volts
IP Rating
 Weatherproof IP65 
Dimmable
Wire Length
50in(127cm)
Special Features
Built in Bracket, Compact
Connection Type
Wire Leads
This LED flood light emits a wide 120° beam of natural or warm white illumination for landscape lighting, parking lot lighting, tree uplighting, flagpole lighting, and architectural wall washing. The LED fixture emits 5,600 lumens for ample outdoor illumination and operates within a wide 100-277 VAC range. At 120 volts, the 50-watt LED light typically consumes 54 total watts due to the combination of all internal components. It replaces 250-watt metal-halide (MH) lights and 560-watt incandescent fixtures with comparable output. The weatherproof fixture is constructed of heavy-duty die cast aluminum with an integral heat sink and a tempered glass lens. This LED flood light is also equipped with a UL-Recognized constant-current driver. An adjustable mounting bracket allows you to direct illumination where it's needed. The LED fixture is designed to last 3 times longer than MH fixtures.
In Stock
$119.95 ea.
Super Bright LEDs, Inc. offers a 7-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted.
A product that bears an ETL-Certified label has been evaluated by a Nationally Recognized Testing Laboratory (NRTL) and meets national product safety standards. An ETL certification is accepted in the U.S. and in Canada.
Standards Australia (SAA) is a company that establishes guidelines and rules known as Standards. In an effort to create a sustainable environment, these Standards are designed to ensure that products are safe and function consistently. Products with an SAA label were tested and comply with set Standards.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
Products that are LM-79 certified have been tested for photometric and electrical data by an Environmental Protection Agency (EPA) recognized laboratory. The Illuminating Engineering Society of North America (IES) created LM-79-08—Approved Method: Electrical and Photometric Measurements of Solid-State Lighting Products—to establish guidelines and procedures for the testing of solid-state lighting (SSL) products such as LED fixtures. Procedures are listed for luminous flux, electrical power, luminous intensity distribution, and chromaticity. See documentation section under specifications for available report.
The DesignLights Consortium® (DLC®) partners with energy-efficiency groups and utility companies to establish a set of standards for commercial LED light fixtures. The product is tested and must meet quality, energy-efficiency, and performance requirements to be added to the DLC's Qualified Products List. For more information, click here.
$119.95 ea.
  • Part Number:
View More Information
Make Your Selections
New Product

80 Watt High Power LED Flood Light Fixture

Compact series
Show Details
Available LED Colors
Brightness
9300 lm
Comparable Wattage
930 Watts
Beam Angle
 120 degree 
Total Power Consumption(Max)
80 Watts
Volts
90~305 VAC
IP Rating
 Weatherproof IP65 
Dimmable
Wire Length
50in(127cm)
Special Features
Built in Bracket, Compact
Connection Type
Wire Leads
This LED flood light emits a wide 120° beam of natural or warm white illumination for landscape lighting, parking lot lighting, tree uplighting, flagpole lighting, and architectural wall washing. The LED fixture emits 9,300 lumens for ample outdoor illumination and operates within a wide 90-305 VAC range. Consuming only 80 watts of power at 120 volts, this energy-efficient LED fixture replaces 400-watt metal-halide (MH) lights and 930-watt incandescent fixtures with comparable output. The weatherproof LED fixture is constructed of heavy-duty die cast aluminum with an integral heat sink and a tempered glass lens. This flood light is also equipped with a UL-Recognized constant-current driver. An adjustable mounting bracket allows you to direct illumination where it's needed. The LED flood light is designed to last 3 times longer than MH fixtures.
In Stock
$189.95 ea.
Super Bright LEDs, Inc. offers a 7-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted.
A product that bears an ETL-Certified label has been evaluated by a Nationally Recognized Testing Laboratory (NRTL) and meets national product safety standards. An ETL certification is accepted in the U.S. and in Canada.
Standards Australia (SAA) is a company that establishes guidelines and rules known as Standards. In an effort to create a sustainable environment, these Standards are designed to ensure that products are safe and function consistently. Products with an SAA label were tested and comply with set Standards.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
Products that are LM-79 certified have been tested for photometric and electrical data by an Environmental Protection Agency (EPA) recognized laboratory. The Illuminating Engineering Society of North America (IES) created LM-79-08—Approved Method: Electrical and Photometric Measurements of Solid-State Lighting Products—to establish guidelines and procedures for the testing of solid-state lighting (SSL) products such as LED fixtures. Procedures are listed for luminous flux, electrical power, luminous intensity distribution, and chromaticity. See documentation section under specifications for available report.
The DesignLights Consortium® (DLC®) partners with energy-efficiency groups and utility companies to establish a set of standards for commercial LED light fixtures. The product is tested and must meet quality, energy-efficiency, and performance requirements to be added to the DLC's Qualified Products List. For more information, click here.
$189.95 ea.
  • Part Number:
View More Information
Make Your Selections
New Product

100 Watt High Power LED Flood Light Fixture

Compact series
Show Details
Available LED Colors
Brightness
12000 lm
Comparable Wattage
560 Watts, 1200 Watts
Beam Angle
 120 degree 
Total Power Consumption(Max)
96 Watts
Volts
90~305 VAC
IP Rating
 Weatherproof IP65 
Dimmable
Wire Length
50in(127cm)
Special Features
Built in Bracket, Compact
Connection Type
Wire Leads
This LED flood light emits a wide 120° beam of natural or warm white illumination for landscape lighting, parking lot lighting, tree uplighting, flagpole lighting, and architectural wall washing. The powerful LED light emits 12,000 lumens for ample outdoor illumination and operates within a wide 90-305 VAC range. At 120 volts, the 100-watt LED light consumes just 96 watts of power. It replaces 500-watt high-intensity discharge (HID) lights or 1,200-watt incandescent fixtures with comparable output. The weatherproof LED fixture is constructed of heavy-duty die cast aluminum with an integral heat sink and a tempered glass lens. This LED flood light is also equipped with a UL-Recognized constant-current driver. An adjustable mounting bracket allows you to direct illumination where it's needed. The LED fixture is designed to last 3 times longer than HID fixtures.
In Stock
$229.95 ea.
Super Bright LEDs, Inc. offers a 7-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted.
A product that bears an ETL-Certified label has been evaluated by a Nationally Recognized Testing Laboratory (NRTL) and meets national product safety standards. An ETL certification is accepted in the U.S. and in Canada.
Standards Australia (SAA) is a company that establishes guidelines and rules known as Standards. In an effort to create a sustainable environment, these Standards are designed to ensure that products are safe and function consistently. Products with an SAA label were tested and comply with set Standards.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
Products that are LM-79 certified have been tested for photometric and electrical data by an Environmental Protection Agency (EPA) recognized laboratory. The Illuminating Engineering Society of North America (IES) created LM-79-08—Approved Method: Electrical and Photometric Measurements of Solid-State Lighting Products—to establish guidelines and procedures for the testing of solid-state lighting (SSL) products such as LED fixtures. Procedures are listed for luminous flux, electrical power, luminous intensity distribution, and chromaticity. See documentation section under specifications for available report.
The DesignLights Consortium® (DLC®) partners with energy-efficiency groups and utility companies to establish a set of standards for commercial LED light fixtures. The product is tested and must meet quality, energy-efficiency, and performance requirements to be added to the DLC's Qualified Products List. For more information, click here.
$229.95 ea.
  • Part Number:
View More Information
Make Your Selections
New Product

200 Watt High Power LED Flood Light Fixture

Compact series
Show Details
Available LED Colors
Brightness
25000 lm
Comparable Wattage
2500 Watts
Beam Angle
 120 degree 
Total Power Consumption(Max)
209 Watts
Volts
90~305 VAC
IP Rating
 Weatherproof IP65 
Dimmable
Wire Length
50in(127cm)
Special Features
Built in Bracket, Compact
Connection Type
Wire Leads
This LED flood light emits a wide 120° beam of natural or warm white illumination for landscape lighting, parking lot lighting, tree uplighting, flagpole lighting, and architectural wall washing. The powerful LED fixture emits 25,000 lumens for ample outdoor illumination and operates within a wide 90-305 VAC range. At 120 volts, the 200-watt LED light typically consumes 209 total watts due to the combination of all internal components. It replaces 1,000-watt high-intensity discharge (HID) lights or 2,500-watt incandescent fixtures with comparable output. The weatherproof LED fixture is constructed of heavy-duty die cast aluminum with an integral heat sink and a tempered glass lens. This LED flood light is also equipped with a UL-Recognized constant-current driver. An adjustable mounting bracket allows you to direct illumination where it's needed. The LED fixture is designed to last 3 times longer than HID fixtures.
In Stock
$329.95 ea.
Super Bright LEDs, Inc. offers a 7-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted.
A product that bears an ETL-Certified label has been evaluated by a Nationally Recognized Testing Laboratory (NRTL) and meets national product safety standards. An ETL certification is accepted in the U.S. and in Canada.
Standards Australia (SAA) is a company that establishes guidelines and rules known as Standards. In an effort to create a sustainable environment, these Standards are designed to ensure that products are safe and function consistently. Products with an SAA label were tested and comply with set Standards.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
Products that are LM-79 certified have been tested for photometric and electrical data by an Environmental Protection Agency (EPA) recognized laboratory. The Illuminating Engineering Society of North America (IES) created LM-79-08—Approved Method: Electrical and Photometric Measurements of Solid-State Lighting Products—to establish guidelines and procedures for the testing of solid-state lighting (SSL) products such as LED fixtures. Procedures are listed for luminous flux, electrical power, luminous intensity distribution, and chromaticity. See documentation section under specifications for available report.
The DesignLights Consortium® (DLC®) partners with energy-efficiency groups and utility companies to establish a set of standards for commercial LED light fixtures. The product is tested and must meet quality, energy-efficiency, and performance requirements to be added to the DLC's Qualified Products List. For more information, click here.
$329.95 ea.
  • Part Number:
View More Information
Make Your Selections
New Product

150 Watt High Power LED Flood Light Fixture

Compact series
Show Details
Available LED Colors
Brightness
18000 lm
Comparable Wattage
1800 Watts
Beam Angle
 120 degree 
Total Power Consumption(Max)
150 Watts
Volts
90~305 VAC
IP Rating
 Weatherproof IP65 
Dimmable
Wire Length
50in(127cm)
Special Features
Built in Bracket, Compact
Connection Type
Wire Leads
This LED flood light emits a wide 120° beam of warm or cool white illumination for landscape lighting, parking lot lighting, tree uplighting, flagpole lighting, and architectural wall washing. The powerful LED fixture emits 18,000 lumens for ample outdoor illumination and operates within a wide 90-305 VAC range. Consuming only 150 watts of power at 120 volts, this energy-efficient LED fixture replaces 800-watt high-intensity discharge (HID) lights or 1,800-watt incandescent fixtures with comparable output. The weatherproof LED fixture is constructed of heavy-duty die cast aluminum with an integral heat sink and a tempered glass lens. This LED flood light is also equipped with a UL-Recognized constant-current driver. An adjustable mounting bracket allows you to direct illumination where it's needed. The LED fixture is designed to last 3 times longer than HID fixtures.
In Stock
$279.95 ea.
Super Bright LEDs, Inc. offers a 7-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted.
A product that bears an ETL-Certified label has been evaluated by a Nationally Recognized Testing Laboratory (NRTL) and meets national product safety standards. An ETL certification is accepted in the U.S. and in Canada.
Standards Australia (SAA) is a company that establishes guidelines and rules known as Standards. In an effort to create a sustainable environment, these Standards are designed to ensure that products are safe and function consistently. Products with an SAA label were tested and comply with set Standards.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
Products that are LM-79 certified have been tested for photometric and electrical data by an Environmental Protection Agency (EPA) recognized laboratory. The Illuminating Engineering Society of North America (IES) created LM-79-08—Approved Method: Electrical and Photometric Measurements of Solid-State Lighting Products—to establish guidelines and procedures for the testing of solid-state lighting (SSL) products such as LED fixtures. Procedures are listed for luminous flux, electrical power, luminous intensity distribution, and chromaticity. See documentation section under specifications for available report.
The DesignLights Consortium® (DLC®) partners with energy-efficiency groups and utility companies to establish a set of standards for commercial LED light fixtures. The product is tested and must meet quality, energy-efficiency, and performance requirements to be added to the DLC's Qualified Products List. For more information, click here.
$279.95 ea.
  • Part Number:
View More Information
Make Your Selections
8.
GLUX-x6W-S40
Show Details
Available LED Colors
Brightness
400 lm
Comparable Wattage
35-40 Watts
Beam Angle
 40 degree 
Total Power Consumption(Max)
7.8 Watts
Volts
IP Rating
 Waterproof IP68 
Dimmable
Wire Length
58in(147.3cm)
Special Features
G-LUX Compatible, Plug and Play
Connection Type
G-LUX, G-LUX Male
G-LUX outdoor LED spot light with 3 x 2 Watt CREE LED that produces up to 280 lumens. 12 AC/DC operating voltage, IP68 waterproof light. Available as either nickel plated brass housing with cool white LEDs or matte black on brass with warm white LEDs. 4-1/2' power cord with plug and play G-LUX connector, can also be used with existing landscape system with GLUX pigtail power cable. Available in Cool White or Warm White with spot 40 degree beam pattern. See all compatible G-LUX series products and accessories.
Various Options In Stock
$39.95 ea.
Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$39.95 ea.
  • Part Number:
View More Information
Make Your Selections
9.
GLUX-x1W-S60
Show Details
Available LED Colors
Brightness
45 lm
Comparable Wattage
5-10 Watts
Beam Angle
 60 degree 
Total Power Consumption(Max)
1.5 Watts
Volts
IP Rating
 Waterproof IP68 
Dimmable
Wire Length
58in(147.3cm)
Special Features
G-LUX Compatible, Plug and Play
Connection Type
G-LUX, G-LUX Male
LED landscape lights are an energy-efficient solution for architectural lighting, garden lighting, outdoor accent lighting, tree uplighting, and sign lighting. This 1-watt outdoor LED spotlight has 1 Cree LED with an output of up to 45 lumens and produces a 60° beam pattern of cool or warm white illumination. An IP68-rated waterproof textured black powder coated brass housing protects internal components, and an adjustable mounting base allows the fixture to be aimed up or down within 80° of the mounting surface. The LED spotlight has 12V AC/DC operation and a 4-13/16' power cord with a G-LUX plug-and-play connector for easy installation in a G-LUX landscape wiring system. Can also be used in an existing low-voltage landscape wiring system with a G-LUX pigtail power cable. See all compatible G-LUX series products and accessories.
Clearance Options Available
Starting at $21.88 ea.
Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

Starting at $21.88 ea.
  • Part Number:
View More Information
Make Your Selections
10.
HPAL-x150-BP9
Show Details
LED Color
Brightness
16500 lm
Comparable Wattage
N/A
Beam Angle
 90 degree 
Total Power Consumption(Max)
160 Watts
Volts
IP Rating
 Weatherproof IP66 
Dimmable
Wire Length
N/A
Special Features
N/A
Connection Type
Pigtail
Perfect for parking lot lighting, high-bay lighting, street lighting, car dealerships, stadiums, tunnel lighting, outdoor sports areas, campuses, and parks—this LED area light shines brightly when reliability and performance are critical. Using 168 LEDs (3 groups of 56), the area light emits 16,500 lumens of powerful natural white (4500-5500K) illumination in a 90° beam pattern. This 150-watt LED light typically consumes 160 total watts due to the combination of all internal components. The area light is comparable to a 400-watt metal-halide (MH) fixture. And with a life expectancy of 100,000 hours—5 times as long as MH fixtures—the LED light reduces costly repairs and the need for replacements. A weatherproof brown aluminum alloy housing protects internal components and is powder coated to resist rust. Shock- and UV-resistant polycarbonate lenses protect LEDs. The durable LED fixture comes with an adjustable bracket or can be used with one of many mounting options (sold separately) for walls, ceilings, round or square poles, and suspended chain installation. This LED area light is equipped with a constant-current driver and operates within a wide 100-277V AC range.
In Stock
$349.95 ea.
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted.
A product that bears an ETL-Certified label has been evaluated by a Nationally Recognized Testing Laboratory (NRTL) and meets national product safety standards. An ETL certification is accepted in the U.S. and in Canada.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
The DesignLights Consortium® (DLC®) partners with energy-efficiency groups and utility companies to establish a set of standards for commercial LED light fixtures. The product is tested and must meet quality, energy-efficiency, and performance requirements to be added to the DLC's Qualified Products List. For more information, click here.
Products that are LM-80 certified have been tested for lumen depreciation by an Environmental Protection Agency (EPA) recognized laboratory. The Illuminating Engineering Society of North America (IES) created LM-80-08 to establish guidelines and procedures for the testing of solid-state lighting (SSL) products, such as LED packages, modules, and arrays (not complete fixtures). Procedures are listed for testing lumen maintenance over a period of time. See documentation section under specifications for available report.
$349.95 ea.
  • Part Number:
View More Information
Make Your Selections
10 of 36 Results
of 4

Send us your Feedback